Comparison of protein adsorption isotherms and uptake rates in preparative cation-exchange materials

Adsorption isotherms and effective diffusivities of lysozyme in a set of six preparative cation-exchange stationary phases were determined from batch uptake data in a stirred vessel. Both a pore diffusion and a homogeneous diffusion model were used in estimating diffusivities, with the isotherms fitted to a non-Langmuirian analytical isotherm equation. The capacities inferred from the isotherms are found to be correlated with the surface area accessible to lysozyme, the effective surface concentrations obtained being in agreement with values measured by different methods in various non-chromatographic systems. The pore diffusivities show systematic trends with protein and salt concentration, and effects of pore size and connectivity are also evident. Some trends in the homogeneous diffusivities are quite different to those in the pore diffusivities, but these differences largely disappear when the homogeneous diffusivities are rescaled to account for adsorption equilibrium behavior. Additional information is required to elucidate further the mechanisms of coupled diffusion and adsorption in stationary phases.     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

HAR-sEMG: A Dataset for Human Activity Recognition on Lower-Limb sEMG

Knowledge and Information Systems - In the past decade, human activity recognition (HAR) has grown in popularity due to its applications in security and entertainment. As recent years have...     

A graph-based QoS prediction approach for web service recommendation

Applied Intelligence - With the development of the Internet, the recommendation based on Quality of Service(QoS) is proven to be an efficient way to deal with the ever-increasing web services in...     

A boundary element method for two dimensional linear elastic fracture analysis

A boundary element method is developed for the analysis of fractures in two-dimensional solids. The solids are assumed to be linearly elastic and isotropic, and both bounded and unbounded domains are treated. The development of the boundary integral equations exploits (as usual) Somigliana's identity, but a special manipulation is carried out to regularize certain integrals associated with the crack line. The resulting integral equations consist of the conventional ordinary boundary terms and two additional terms which can be identified as a distribution of concentrated forces and a distribution of dislocations along each crack line. The strategy for establishing the integral equations is first outlined in terms of real variables, after which complex variable techniques are adopted for the detailed development. In the numerical implementation of the formulation, the ordinary boundary integrals are treated with standard boundary element techniques, while a novel numerical procedure is developed to treat the crack line integrals. The resulting numerical procedure is used to solve several sample problems for both embedded and surface-breaking cracks, and it is shown that the technique is both accurate and efficient. The utility of the method for simulating curvilinear crack propagation is also demonstrated.     

Enhanced Photoelectrochemical Performance of Hematite Photoanode by Decorating NiCoP Nanoparticles Through a Facile Spin Coating Method

Catalysis Letters - Hematite (α-Fe2O3) is a potential photoanode material for photoelectrochemical (PEC) water splitting, but its short hole diffusion length and low water oxidation kinetics...     

Predicting phase equilibrium,phase transformation,and microstructure evolution in titanium alloys

Phase transformation and microstructural evolution in commercial titanium alloys are extremely complex. Traditional models that characterize microstructural features by average values without capturing the anisotropy and spatially varying aspects may not be sufficient to quantitatively define the microstructure and hence to allow for establishing a robust microstructure-property relationship. This article discusses recent efforts in integrating thermodynamic modeling and phase-field simulation to develop computational tools for quantitative prediction of phase equilibrium and spatiotemporal evolution of microstructures during thermal processing that account explicitly for precipitate morphology, spatial arrangement, and anisotropy. The rendering of the predictive capabilities of the phase-field models as fast-acting design tools through the development of constitutive equations is also demonstrated. For more information, contact Y.-Z. Wang, Department of Materials Science & Engineering, Ohio State University, 2041 College Road, Columbus, OH 43221, USA; (614) 292-0682; fax (614) 292-1537; e-mail wang.363@osu.edu.     

Pervaporation performance analysis and prediction—using a hybrid solution-diffusion and pore-flow model

A hybrid mathematic model for pervaporation is proposed which incorporates the concepts of solution-diffusion model and pore model. The model allows performance prediction as well as the establishment of the internal concentration and pressure profiles within the membrane. The model parameters specific to the particular membrane and mixture system are determined using liquid sorption and pervaporation experimental data. The model is experimentally examined using ethanol–water mixtures and poly(dimethyl siloxane)–poly(vinyldiene fluoride) (PDMS–PVDF) composite membranes. The characteristics of flux and separation factor predicted using the model are in fair agreement with the experimental data under various feed concentrations and downstream pressures for different membrane arrangements, including single-layer, reverse single-layer and double-layer PDMS–PVDF composite membranes. Internal profiles of pressure, concentration and component mole fraction can be established using the model. Concentration polarization phenomena for ethanol and water are located at membrane interfaces and vapor–liquid interfaces, respectively. Performances of several different membrane designs are compared using the model.     

Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)

Intercalated nanocomposites with poly(butylene terephthalate) (PBT) incorporated between the montmorillonite layers were synthesized from dimethyl terephthalate and 1,4-butane diol by using an in situ interlayer polymerization. The PBT nanocomposites were melt-spun at different organoclay contents to produce monofilaments. The samples were characterized by using wide angle X-ray diffraction, electron microscopy, thermal analysis, and tensile testing. The extent of the clay layer in the PBT was confirmed by using X-ray diffraction and electron microscopy, and the clay layer was found to be highly dispersed on a nanometer scale. The addition of only a small amount of organoclay was enough to improve the thermo-mechanical properties of the PBT hybrid fibers. The hybrids were extruded with various draw ratios (DRs) to examine the tensile mechanical property of the fibers. At DR=1, the ultimate tensile strength of the hybrid fibers increased with the addition of clay up to a critical content and then decreased. However, the initial modulus monotonically increased with increasing amount of organoclay in the PBT matrix. When the DR was increased from 1 to 6, for example, the strength and the initial modulus values of the hybrids containing 3 wt% organoclay decreased linearly.