Spinel phase LiMn2O4 was successfully embedded into monoclinic phase layeredstructured Li2MrnO3 nanorods,and these spinel-layered integrate structured nanorods showed both high capacities and superior high-rate capabilities as cathode material for lithium-ion batteries (LIBs).Pristine Li2MnO3 nanorods were synthesized by a simple rheological phase method using α-MnO2 nanowires as precursors.The spinel-layered integrate structured nanorods were fabricated by a facile partial reduction reaction using stearic acid as the reductant.Both structural characterizations and electrochemical properties of the integrate structured nanorods verified that LiMn2O4 nanodomains were embedded inside the pristine Li2MnO3 nanorods.When used as cathode materials for LIBs,the spinel-layered integrate structured Li2MnO3 nanorods (SL-Li2MnO3) showed much better performances than the pristine layered-structured Li2MnO3 nanorods (L-Li2MnO3).When charge-discharged at 20 mA·g-1 in a voltage window of 2.0-4.8 V,the SL-Li2MnO3 showed discharge capadties of 272.3 and 228.4 mAh.g-1 in the first and the 60th cycles,respectively,with capacity retention of 83.8%.The SL-Li2MnO3 also showed superior high-rate performances.When cycled at rates of 1 C,2 C,5 C,and 10 C (1 C =200 mA·g-1) for hundreds of cycles,the discharge capacities of the SL-Li2MnO3 reached 218.9,200.5,147.1,and 123.9 mAh·g-1,respectively.The superior performances of the SL-Li2MnO3 are ascribed to the spineMayered integrated structures.With large capacities and superior high-rate performances,these spinel-layered integrate structured materials are good candidates for cathodes of next-generation high-power LIBs. 相似文献
Thermoelectric materials,which can convert waste heat into electricity,have received increasing research interest in recent years.This paper describes the recent progress in thermoelectric nanocomposites based on solution-synthesized nanoheterostructures.We start our discussion with the strategies of improving the power factor of a given material by using nanoheterostructures.Then we discuss the methods of decreasing thermal conductivity.Finally,we highlight a way of decoupling power factor and thermal conductivity,namely,incorporating phase-transition materials into a nanowire heterostructure.We have explored the lead telluride-copper telluride thermoelectric nanowire heterostructure in this work.Future possible ways to improve the figure of merit are discussed at the end of this paper. 相似文献
Light management and electrical isolation are essential for the majority of optoelectronic nanowire (NW) devices.Here,we present a cost-effective technique,based on vapor-phase deposition of parylene-C and subsequent annealing,that provides conformal encapsulation,anti-reflective coating,improved optical properties,and electrical insulation for GaAs nanowires.The process presented allows facile encapsulation and insulation that is suitable for any nanowire structure.In particular,the parylene-C encapsulation functions as an efficient antireflection coating for the nanowires,with reflectivity down to <1% in the visible spectrum.Furthermore,the parylene-C coating increases photoluminescence intensity,suggesting improved light guiding to the NWs.Finally,based on this process,a NW LED was fabricated,which showed good diode performance and a clear electroluminescence signal.We believe the process can expand the fabrication possibilities and improve the performance of optoelectronic nanowire devices. 相似文献
The homogeneous incorporation of heteroatoms into two-dimensional C nanostructures, which leads to an increased chemical reactivity and electrical conductivity as well as enhanced synergistic catalysis as a conductive matrix to disperse and encapsulate active nanocatalysts, is highly attractive and quite challenging. In this study, by using the natural and cheap hydrotropic amino acid proline—which has remarkably high solubility in water and a desirable N content of ~12.2 wt.%—as a C precursor pyrolyzed in the presence of a cubic KCl template, we developed a facile protocol for the large-scale production of N-doped C nanosheets with a hierarchically porous structure in a homogeneous dispersion. With concomitantly encapsulated and evenly spread Fe2O3 nanoparticles surrounded by two protective ultrathin layers of inner Fe3C and outer onion-like C, the resulting N-doped graphitic C nanosheet hybrids (Fe2O3@Fe3C-NGCNs) exhibited a very high Li-storage capacity and excellent rate capability with a reliable and prolonged cycle life. A reversible capacity as high as 857 mAh•g–1 at a current density of 100 mA•g–1 was observed even after 100 cycles. The capacity retention at a current density 10 times higher—1,000 mA•g–1—reached 680 mAh•g–1, which is 79% of that at 100 mA•g–1, indicating that the hybrids are promising as anodes for advanced Li-ion batteries. The results highlight the importance of the heteroatomic dopant modification of the NGCNs host with tailored electronic and crystalline structures for competitive Li-storage features.
A combined hot-injection and heat-up method was developed to synthesize monodisperse and uniform CoMn2O4 quantum dots (CMO QDs).CMO QDs with average size of 2.0,3.9,and 5.4 nm were selectively obtained at 80,90,and 105 ℃,respectively.The CMO QDs supported on carbon nanotubes (CNTs) were employed as catalysts for the oxygen reduction/evolution reaction (ORR/OER) in alkaline solution to investigate their size-performance relationship.The results revealed that the amount of surface-adsorbed oxygen and the band gap energy,which affect the charge transfer in the oxygen electrocatalysis processes,strongly depend on the size of the CMO QDs.The CMO-3.9/CNT hybrid,consisting of CNT-supported CMO QDs of 3.9 nm size,possesses a moderate amount of surfaceadsorbed oxygen,a lower band gap energy,and a larger charge carrier concentration,and exhibits the highest electrocatalytic activity among the hybrid materials investigated.Moreover,the CMO-3.9/CNT hybrid displays ORR and OER performances similar to those of the benchmark Pt/C and RuO2 catalysts,respectively,due to the strong carbon-oxide interactions and the high dispersion of CoMn2O4 QDs on the carbon substrate;this reveals the huge potential of the CMO-3.9/CNT hybrid as a bifunctional OER/ORR electrocatalyst.The present results highlight the importance of controlling the size of metal oxide nanodots in the design of active oxygen electrocatalysts based on spinel-type,nonprecious metal oxides. 相似文献
To attain the general form of stable coalition structure, this paper addressed the problem of retailers’ coalition stability in a two-stage supply chain consisting of one supplier and multiple retailers. A profit gain function was established via introducing market gain coefficient and coalition cost coefficient for different coalition structures. Based on the function, the profit of each retailer in all kinds of coalition structures was analysed, and the general feature of a stable coalition structure was attained by the largest consistent set method and the stable set method. Furthermore, some insights were obtained. For example, stable coalition structures are equidistributed or approximate equidistributed; with supplier’s cost increasing, the size of the retailers’ coalition increases. Finally, the above conclusions are verified by numerical simulation. The results of this paper provide a reference for retailers’ coalition in a supply chain, such as automobile or Information Technology supply chain. 相似文献