供水管网中压力真实值的批次平差算法

分析了测压点优化布置的意义及原则,并根据供水周期性,依靠数量有限的测压点压力数据,结合管网的水力计算,利用传统的平差原理,将测压点以外的其它节点压力进行真实性校正,推算出了管网各节点的真实压力值,实现了通过有限测压点数据对管网所有节点压力的全面了解。     

An optimized image watermarking algorithm based on SVD and IWT

The Journal of Supercomputing - With the wide spread of image information, it is an urgent problem to protect image property rights and crack down on piracy. Watermarking algorithm is an effective...     

Determination of the acidic properties of carboxylated carbocatalysts in an acid-catalyzed ring-opening reaction using kinetic profiling

The acid-catalyzed ring-opening reaction of styrene oxide was used as a probe reaction for evaluating the acidic properties of carboxylated carbocatalysts. Significant discrepancies in the initial reaction rates were normalized using the total number of carboxyl groups, and demonstrated that the average catalytic activities of the carboxyl moieties on the carbocatalysts differed. Comparisons between the apparent activation energy E _a and the pre-exponential factor A, derived from Arrhenius analysis, demonstrated that A varied more significantly, and therefore had a more significant effect on the reaction rates than E _a. The variation in the calculated pKa values of the carboxyl groups was attributed to the electronic effects of the nitro groups. This hypothesis was supported by the temperature programmed desorption profiles of nitrogen monoxide ions.

Open image in new window

     

强磁场对硅锰铸钢于A_1点附近等温珠光体相变的影响

通过开展12 T强磁下硅锰铸钢(50Si_2Mn_3)于A_1点温度附近不同等温时间的热处理试验,并对比强磁场与无磁场条件下等温珠光体相变试验结果,研究了磁场对珠光体转变量及组织形貌的影响。研究表明,对于50Si_2Mn_3在A1点以下较高温度范围内,强磁场可缩短珠光体相变的孕育期,促进硅锰铸钢珠光体转变,使其转变量明显增加;强磁场能够提高珠光体转变临界点,使50Si_2Mn_3在A1点以上等温过程中能够发生珠光体相变。     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

纳米碳中的微观缺陷结构特征

测定了定向石墨和纳米碳的正电子寿命谱,结果表明,热解法制备的纳米碳存在开空间小于单空位的自由体积以及开宽间相当于约１０个空位聚集体全的微孔洞,比较了热解法制备的纳米碳,ＵＦＰ冷压法制备的纳米Ｆｅ和纳米ＴｉＯ２以有非晶晶化法制备的纳米ＮｉＰ的缺陷结构特征,结果为纳米ＮｉＰ中缺陷的电子密度最高,纳米Ｆｅ和纲米ＴｉＯ２次之,纳米碳的最低,纳米碳中的缺陷浓度最高,纳米Ｆｅ和纳米ＴｉＯ２的次之,纳米ＮｉＰ的     

我国陆地观测卫星现状及发展战略思考

本文回顾总结了我国陆地观测卫星载荷体系、地面系统建设及数据应用等方面的发展现状和成就,分析了当前所面临的挑战和任务,以此为基础,对我国陆地观测卫星的未来发展进行了战略思考和展望,提出了加强国家顶层规划、加强地面系统统筹建设、实现系列化业务化运营、加强国际合作、推进产业化发展等建议.     

CAN总线网络测试研究

介绍了CAN总线网络开发方法,搭建了CAN总线集成开发测试环境,对实际网络进行了测试,给出了位定时参数计算方法,比较了不同模拟终端电阻下的总线的报文正确率和总线负载率等性能指标.     

Modeling contaminant intrusion in water distribution networks: A new similarity-based DST method

Contaminant intrusion in a water distribution network is a complex but a commonly observed phenomenon, which depends on three elements – a pathway, a driving force and a contamination source. However, the data on these elements are generally incomplete, non-specific and uncertain. In an earlier work, Sadiq, Kleiner, and Rajani (2006) have successfully applied traditional Dempster–Shafer theory (DST) to estimate the “risk” of contaminant intrusion in a water distribution network based on limited uncertain information. However, the method used for generating basic probability assignment (BPA) was not very flexible, and did not handle and process uncertain information effectively. In this paper, a more pragmatic method is proposed that utilizes “soft” computing flexibility to generate BPAs from uncertain information. This paper compares these two methods through numerical examples, and demonstrates the efficiency and effectiveness of modified method.