Transforming One‐Dimensional Nanowalls to Long‐Range Ordered Two‐Dimensional Nanowaves: Exploiting Buckling Instability and Nanofibers Effect in Holographic Lithography

Two‐dimensional nanowaves with long‐range order are fabricated by exploiting swelling‐induced buckling of one‐dimensional (1D) nanowalls with nanofibers formed in‐between during holographic lithography of the negative‐tone photoresist SU‐8. The 1D film goes through a constrained swelling in the development stage, and becomes buckled above the critical threshold. The degree of lateral undulation can be controlled by tuning the pattern aspect ratio (height/width) and exposure dosage. At a high aspect ratio (e.g., 6) and a high exposure dosage, nanofibers (30–50 nm in diameter) are formed between the nanowalls as a result of overlapping of low crosslinking density regions. By comparing experimental results with finite‐element analysis, the buckling mechanism is investigated, which confirms that the nanofibers prevent the deformed nanowalls from recovery to their original state, thus, leading to long‐range ordered two‐dimensional (2D) wavy structures. The film with nanowaves show weaker reflecting color under an ambient light and lower transmittance compared to the straight nanowalls. Using double exposure through a photomask, patterns consisting of both nanowaves and nanowalls for optical display are created.     

Photo‐Stable Organic Thin‐Film Transistor Utilizing a New Indolocarbazole Derivative for Image Pixel and Logic Applications

Small molecule pentacene layer has been a representative among many organic thin‐film transistor (OTFT) channels with decent p‐type mobilities, but it is certainly light‐sensitive due to its relatively small highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap (1.85 eV). Although a few other small molecule‐based layers have been reported later, their photo‐stabilities or related device applications have hardly been addressed. Here, a new photostable organic layer is reported, heptazole (C₂₆H₁₆N₂), which has almost the same HOMO level as that of pentacene but with a higher HOMO‐LUMO gap (≈2.95 eV). This heptazole OTFT displays a decent mobility comparable to that of conventional amorphous Si TFTs, showing good photostability unlike pentacene OTFTs. An image pixel driving the photostable heptazole OTFT connected to a pentacene/Al Schottky photodiode is demonstrated. This heptazole OTFT also conveniently forms a logic inverter coupled with a pentacene OTFT, sharing Au for source/drain.     

Toward Advanced Mobile Cloud Computing for the Internet of Things: Current Issues and Future Direction

Cloud computing is the coming new era of information processing and has proved its benefits in high scalability and functional diversity. However, almost all cloud-computing architectures including SaaS, PaaS, and IaaS are vulnerable to serious security issues. Similarly, Mobile Cloud Computing (MCC) is vital to overcoming mobile limited storage and computing capabilities. MCC authentication and authorization issues must be provided on two levels: login password control and the environment from where the cloud is accessed. MCC has overcome the barrier of limited storage by providing remote storage but requires a strict security system that is responsible for retrievability, integrity, and seamless storage access. Elasticity and connectivity are also of major concern in MCC because delays and jitters cause degradation in the user experience. Cloud-computing architecture creates more challenges in maintaining security because of the liberty of users to choose any MCC architecture. Thus in this paper we discuss current cloud computing issues and future directions.     

3‐Level Envelope Delta‐Sigma Modulation RF Signal Generator for High‐Efficiency Transmitters

This paper presents a 0.13 μm CMOS 3‐level envelope delta‐sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz‐centered fully symmetrical 3‐level EDSM signal for high‐efficiency power amplifier architectures. It consists of an I‐Q phase modulator, a Class B wideband buffer, an up‐conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3‐state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second‐order BPF as its load to provide enough bandwidth. To achieve an accurate 3‐state envelope level in the up‐mixer output, the LO bias level is optimized. The I‐Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I‐Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of –1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.     

Non-destructive testing of high strength concrete using spectral analysis of surface waves

Non-destructive testing is essential in the inspection of alteration, repair and new construction in construction industry. Researchers are exploring the performance of non-destructive testing method using spectral analysis of surface waves (SASW) in concrete structures. The method consists of the generation, measurement and processing of dispersive surface waves. In SASW test, the surface of the media under consideration is subject to an impact using, for example, a 12-mm steel ball, to generate surface wave energy at various frequencies. Two vertical accelerometer receivers detect the energy transmitted through the testing media. By recording signals in digitized form using a data acquisition system and processing them, surface wave velocity can be obtained using a dispersion curve. This study is to focus on understanding of the applicability and limitations of the SASW method in a high strength concrete. This study is also to characterize the material property of early age high strength concrete emphasizing compressive strength using non-destructive testing methods. Three high strength concrete slabs of 600, 850 and 1100 kg/cm² compressive strengths were prepared together with cylinders from same batches. Cylinder tests were performed at the ages of 7, 14, 21 and 28 days after pouring concrete. Using the impact-echo method, the compression wave velocities were obtained based on different high strength concrete ages and compressive strengths. The equation to obtain the compressive strengths of high strength concrete has been developed using the obtained compression wave velocities (f′_c=1.083V_p−3816.1143). Using the method, the equation has also been developed to obtain the compressive strengths of high strength concrete based on the surface wave velocities (f′_c=0.253V_p+16.271). This study can be utilized in examining structural elements of high strength concrete structures and be applied in the integrity analysis of high strength concrete structures with a finite thickness.     

Fabrication of a Continuously Oriented Porous Al2O3 Body and Its In Vitro Study

Continuously oriented porous Al₂O₃ bodies were fabricated by a multi-pass extrusion process using C powders and ethylene vinyl acetate as an agent for pore forming and as a binder, respectively. The main pore size can be easily controlled by increasing the number of extrusion passes. The edges of the pore frame showed a rough surface having many fine pores about 0.2–1 μm in size. In the continuously porous Al₂O₃ bodies having 150 μm pore size, the values of the relative density and bending strength were about 63% and 90 MPa, respectively. These values were higher than those of an Al₂O₃ porous body made by a common process. From the in vitro study using human osteoblast-like MG-63 cells, it was confirmed that the cells grew well and adhered to the top surface and inside pores, as well as the outside wall of the continuously porous Al₂O₃ body. Without the directionality, the cells showed some spindle-shaped, three-dimensional, and network-type structures.     

Spectral analysis of malfunction mode in endmilling

For the investigation of the chatter modes, the power spectrum of the parametric time series model was adopted and analyzed at several mixed conditions of different revolution. This paper describes a methodology for an application of several time series such asAR (forward-backward, burg, least square, Yule Walker, geometric lattice, instrumental variable),ARX (least square, instrumental variable),ARMAX, ARMA, Box Jenkins, Output Error. To estimate the chatter mode using their spectral analysis their results were compared with one another. As a result, it was proven that several time series methods can be used for chatter mode estimation. Among them, theARX, ARMAX and instrumental variable methods (iv4) are more desirable and reliable than the other algorithm for the exact calculation of the chatter mode in endmilling. Among three cutting forces, the z direction cutting force,Fz, has more powerful characteristics of chatter occurring than the cutting forces,Fx andFy, in the sense that weak mode is calculated exactly and there is no shifted or pseudo mode in the estimated power spectra of endmilling forces.     

Zero-voltage and zero-current-switching full bridge PWM converterfor high-power applications

A novel zero-voltage and zero-current-switching (ZVZCS) full-bridge (FB) pulse-width modulated (PWM) converter is proposed. The new converter overcomes the limitations of the zero-voltage-switching (ZVS)-FB-PWM converter, such as high circulating energy, loss of duty cycle, and limited ZVS load range for the lagging-leg switches. By using the DC blocking capacitor and adding a saturable inductor, the primary current during the freewheeling period is reduced to zero, allowing the lagging-leg switches to be operated with zero-current-switching (ZCS). Meanwhile, the leading-leg switches are still operated with ZVS. The new converter is attractive for high-voltage (400-800 V), high-power (2-10 kW) applications where IGBTs are predominantly used as the power switches. The principle of operation, features, and design considerations of the new converter are described and verified on a 2-kW, 100-kHz, IGBT-based experimental circuit