Whole-body [18F]FDG PET in the management of metastatic brain tumours

BACKGROUND: To determine its roles in the diagnosis and the systemic evaluation of metastatic brain tumours, whole-body positron emission tomography (PET) using [18F]FDG was performed in 20 consecutive patients. METHODS: All patients were thought to be suffering or needing to be differentiated from metastatic brain tumours. Nine patients had multiple brain lesions; six were older and showed a rim-enhancing lesion with surrounding oedema; seven had homogeneously enhancing periventricular lesion(s) on computed tomography (CT) and/or magnetic resonance (MR) imaging, thought to be central nervous system lymphomas. Two patients had skull mass(es) and two patients had a solid mass suspected to be, respectively, a haemorrhagic metastasis and a metastatic malignant melanoma. All of them received whole-body [18F]FDG PET and conventional systemic work-up for metastasis in order to compare the results of the two methods. RESULTS: Metastatic brain tumours were diagnosed on whole-body [18F]FDG PET in eleven patients who had extracranial and intracranial hypermetabolic lesions. In nine of these, a conventional work-up also detected primary lesions which on whole-body [18F]FDG PET were seen to be hypermetabolic foci. Systemic lymph node metastases were detected by whole-body [18F]FDG PET only in two patients and histological diagnosis was possible by biopsy of lymph nodes rather than of brain lesions. In the remaining nine patients who had only intracranial hypermetabolic foci, histological diagnosis was made by craniotomy or stereotactic biopsy. It was confirmed that seven of nine patients were suffering from a primary brain tumour and two from metastatic carcinoma. None of the nine showed evidence of systemic cancer on conventional work-up. Histological diagnoses of the primary brain tumours were four cases of primary central nervous system lymphoma and one each of multifocal glioblastoma, Ewing's sarcoma, and cavernous angioma. Patients felt no discomfort during the whole-body [18F]FDG PET procedure and there were no complications. The false negative rate in [18F]FDG PET and in conventional work-up was 15.4% and 30.7% respectively. There were no false positives on either [18F]FDG PET or conventional work-up. CONCLUSION: It is suggested that whole-body [18F]FDG PET is a safe, reliable, and convenient method for the diagnosis and systemic evaluation of patients thought to be suffering or needing to be differentiated from a metastatic brain tumour.     

Electronic step down (220/110 V) transformer using a new quantumseries resonant converter

A novel quantum series resonant converter (QSRC) topology for a pure sinewave 60 Hz AC chopper is proposed. It has three bidirectional switches and operates at high switching frequency with low switching loss. Bidirectional power flow is possible, and the switches can operate in either zero current switching (ZCS) mode or zero voltage switching (ZVS) mode by slight modification. The QSRC is thought to be suitable for such a system with fixed voltage conversion ratio. The proposed converter is applied to an electronic 220/110 V transformer. Detailed analyses and experimental results for 1 kVA are presented     

Dynamic fracture initiation behavior of an HY-100 steel

An investigation was conducted into the effects of test temperature and loading rate on the initiation of plane strain fracture of an HY-100 steel. Fracture toughness tests were conducted using fatigue precracked round bars loaded in tension to produce a quasi-static stress intensity rate of ·K₁ = 1 MPa√m/s and a dynamic rate of ·K₁ = 2 × 10⁶ MPa√m/s. Testing temperatures covered the range from -150 °C to 200 °C, which encompasses fracture initiation modes involving quasi-cleavage to fully ductile fracture. The results of toughness tests show that the lower-shelf values of fracture toughness were substantially independent of loading rate, while the dynamic values exceeded the quasi-static values by about 50 pct on the upper shelf. In analyzing these results, phenomenological fracture initiation models were adopted based on the requirement that, for fracture to occur, a critical strain or stress must be achieved over a critical distance. In separate tests, the observation of microfracture processes was investigated using fractography and anin situ scanning electron microscope (SEM) fracture technique. The layered ppearance of the fracture surfaces was found to be associated with a banded structure which generally contains many MnS inclusions, probably resulting in a reduction of the fracture toughness values.     

Parallel feed travelling wave distributed pin photodetectors withintegrated MMI couplers

The fabrication and performance of a parallel feed travelling wave photodetector with pin diodes operating at 1550 nm is presented. A parallel optical feed using an integrated multimode interference (MMI) power splitter helps increase the maximum linear photocurrent through a more uniform distribution of photocurrent. The maximum DC linear current measured is 52.2 mA. Maximum linear RF power at 10 GHz was 9 dBm     

Effects of estrogen on tight junctional resistance in cultured human umbilical vein endothelial cells

OBJECTIVE: To study the effects of estrogen on transendothelial paracellular permeability in women. METHODS: Human umbilical vein endothelial cells (HUVEC) obtained from women were grown on filters. The paracellular permeability characteristics were determined in terms of changes in the permeability to the polar acid pyranine (Ppyr) and as changes in the transendothelial electrical resistance (RTE). Tight junctional resistance characteristics were assayed by lowering luminal NaCl and measuring the dilution potential, and were expressed as the ratio of monoion mobility uCl/uNa (cation selectivity). RESULTS: Low extracellular calcium and hyperosmolarity increased Ppyr and decreased RTE. The former but not the latter condition abolished the endothelium-specific cation selectivity. Treatment with 10 nM of estradiol-17 beta had no effect on RTE, but it increased the cation selectivity. The effect of estradiol required 1-6 hours' incubation with the hormone; it was dose dependent and saturable, with a median effective concentration of estradiol of 1 nM. Diethylstilbestrol, but not estriol, could mimic the effect of estradiol, and the estrogen receptor antagonist ICI-182, 780 blocked it. CONCLUSION: Cultured HUVEC cells form patent tight junctions. Estrogens increase the cation selectivity across HUVEC cultures. The effect of estrogen may be mediated by an estrogen receptor. These effects may be important for vasculoprotection in cases of sudden changes in ions levels across the capillary wall, such as ischemia or reperfusion.     

The FE-lspd model for electron beam dosimetry

The FE-lspd model is a two-component electron beam model that distinguishes between electrons that can be described by small-angle transport theory and electrons that are too widely scattered for small-angle transport theory to be applicable. The two components are called the primary beam and the laterally scattered primary distribution (lspd). The primary beam component incorporates a simple version of the Fermi-Eyges model and dominates dose calculations at therapeutic depths. The lspd component corrects erros in the lateral spreading of the primary beam component, thereby improving the accuracy by which the FE-lspd model calculates dose distribution in blocked fields. Comparisons were made between dose profiles and central-axis depth dose distributions in small fields calculated by the FE-lspd, Fermi-Eyges and EGS4 Monte Carlo models for a 10 MeV beam in a homogeneous water phantom. The maximum difference between the dose calculated using the FE-lspd model and EGS4 Monte Carlo is about 6% at a field diameter of about 1 cm, and less than 2% for field sizes greater than 3 cm diameter. The maximum difference between the Fermi-Eyges and Monte Carlo calculations is about 18% at a field diameter of about 2.5 cm. A comparison was made with the central-axis depth dose distribution measured in water for a 3 cm diameter field in a 10 MeV clinical electron beam. The errors in the dose distribution were found to be less than 2% using the FE-lspd model but almost 18% using the Fermi-Eyges model. A comparison was also made with pencil beam profiles calculated using the second-order Fermi-Eyges transport model.     

Characterization of CFRP Laminates’ layups using through-Transmitting ultrasound waves

Ultrasound waves interact strongly with the orientation and sequence of the plies in a layup when propagating in the thickness direction of composite laminates. Also the layup orientation greatly influences its properties in a composite laminate. If the layup orientation of a ply is misaligned, it could result in the part being rejected and discarded. Now, most researchers cut a small coupon from the waste edge and use a microscope to optically verify the ply sequences on important parts. This may add a substantial cost to the production since the test is both labor intensive and performed after the part is cured. A nondestructive technique would be very beneficial, which could be used to test the part after curing and requires less time than the optical test. Therefore we have developed, reduced, and implemented a novel ply-by-ply vector decomposition model for composite laminates fabricated from unidirectional plies. This model decomposes the transmission of a linearly polarized ultrasound wave into orthogonal components through each ply of a laminate. High probability is found, by comparisons between the model and tests, in characterizing cured layups of the laminates by using the proposed method.     

Plasma chemistries for dry etching of NiFe and NiFeCo

Plasma chemistries based on chlorine, bromine, or iodine have been investigated for inductively coupled plasma etching of NiFe and NiFeCo. There is clear evidence of a chemically enhanced etch mechanism with both Cl₂- and I₂- based mixtures, with no enhancement present for Br₂ chemistries. Etch yields are typically low (≤0.25), emphasizing the need for high ion fluxes in order to achieve practical material removal rates.