Modeling of metadynamic recrystallization kinetics after hot deformation of low-alloy steel Q345B

Based on the steady-state strain measured by single-pass hot compression tests, the method by a double-pass hot compression testing was developed to measure the metadynamic-recrystallization kinetics. The metadynamic recrystallization behavior of low-alloy steel Q345B during hot compression deformation was investigated in the temperature range of 1 000–1 100 °C, the strain rate range of 0.01–0.10 s⁻¹ and the interpass time range of 0.5–50 s on a Gleeble-3500 thermo-simulation machine. The results show that metadynamic recrystallization during the interpass time can be observed. As the deformation temperature and strain rate increase, softening caused by metadynamic recrystallization is obvious. According to the data of thermo-simulation, the metadynamic recrystallization activation energy is obtained to be Q _md=100.674 kJ/mol and metadynamic recrystallization kinetics model is set up. Finally, the error analysis of metadynamic recrystallization kinetics model proves that the model has high accuracy (correlation coefficient R=0.988 6).     

时尚品牌广告的跨文化传播

跨文化传播是时尚品牌战略的重要方面.本文从跨文化传播设计的特点,时尚品牌广告文化的共通性和差异性,跨文化传播的基本原则和时尚品牌广告跨文化传播的策略等几个方面进行分析,旨在强调时尚品牌广告跨文化传播的信息整合与文化语境.     

浅谈图书馆管理与服务创新

适应创新国家决策需要,图书馆管理服务需要不断创新发展思路。本文从经费来源、服务理念、服务方式和队伍管理等四个方面,对这个问题进行了探讨。     

Productivity of coalbed methane wells in southern of Qinshui Basin

Based on regional CBM geological characteristics and drainage data of three typical Coalbed Methane(CBM)wells in the southern Qinshui Basin,history matching,productivity prediction and factor analysis of gas production control are conducted by using COMET3 reservoir modeling software.The results show that in the next 20 years,the cumulative and average daily gas production of the QN01 well are expected to be 800×104 m3 and 1141.1 m3/d,for the QN02 well 878×104 m3 and 1202.7 m3/d and97.5×104 m3 and 133.55 m3/d for the QN03 well.Gas content and reservoir pressure are the key factors controlling gas production in the area; coal thickness,permeability and porosity are less important; the Langmuir volume,Langmuir pressure and adsorption time have relatively small effect.In the process of CBM recovery,the material source and driving force are the key features affecting gas productivity,while the permeation process is relatively important and the desorption process has some impact on gas recovery.     

单体与三体高速船舶粘性流场数值模拟

为了检验CFD在船舶粘性流场计算中的有效性,基于RANSE方法,对单体船型DTMB 5415和三体船FA1粘性流场进行了数值模拟.自由面处理采用VOF方法,湍流模型选用SSTk-ω模型,计算结果与试验数据进行了比较,在傅汝德数不是很高时吻合较好.计算结果表明,CFD可以用来研究复杂船型流动问题,对于阻力、伴流等重要的水动力参数,CFD能够给出与试验相一致的结果;同时VOF方法可以比较好地捕捉船舶自由面波形,对于三体船,计算结果能够清晰地反映出主体和侧体之间强烈的兴波干扰现象,可以为船型优化提供重要的参考.     

Synthesis and characterization of soluble aromatic azopolyamides containing sulfone and ether units

A series of new polyamides 3a–d containing aryl-azo, ether and sulfone groups in the main chain were synthesized from bis[4-(4-aminophenoxy)phenyl sulfone] 1 and several azo aromatic diacyl chlorides 2a–d by the low temperature solution polycondensation technique. FTIR spectroscopy, nuclear magnetic resonance (NMR) and elemental analyses confirmed the structure of these polymers. Owing to the aryl and amide groups in the main chain, these polymers exhibit photochromic properties as well as excellent thermal stabilities. The transition temperatures (T _g) are between 242 and 265 °C, and the char yields at 800 °C in nitrogen atmosphere were above 39%. Based on incorporation of flexible ether linkages and polar sulfone groups, the polyamides show desirable solubility in organic solvents such as DMAc, N,N-dimethylformamide (DMF), N-methyl-2-pyrroidinone (NMP) and dimethylsulfoxide (DMSO). And it is exemplified that polyamide containing 2 and 2′ substitutes performed better solubility. Funded by the National Natural Science Foundation of China (No. 50572081)     

A comparative study of tribological properties between perfluoro and non-perfluoro alkylsilane self-assembled monolayers(SAMs)

The tribological properties of perfluoro and non-perfluoro alkylsilane molecular films were investigated and compared detailedly. Their surface properties were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and contact angle (CA) measurement. A ball-on-disk tribometer was used to study the frictional properties of these alkylsilane monolayers. The experimental results reveal that the alkylsilane molecular films are good candidates to decrease friction and they have good capability to endure rigorous shear forces. Perfluoro alkylsilane molecular films are bonded better with the Si substrate than the simple hydrocarbon ones. The effects of sliding velocity and normal load on friction coefficient are evident and the friction coefficient increases with the increase of the sliding velocity. However, friction coefficient decreases with the increase of normal load initially and then increases, indicating there exists a critical normal load for the load effect. Funded by the National Natural Science Foundation of China (No.50730007 and 50805086), the Foundation of Tsighua Basic Research, and the National Key Basic Research Program of China(No. 2007CB607604)     

Evaluation of PLGA/chitosan/HA conduits for nerve tissue reconstruction

A micro-envioment for nerve cells and tissue growth were designed and constructed via surface modification of poly(L-lactide-co-glycolide)(PLGA) with chitosan and hydroxyapatite(HA). The poly(L-lactide-co-glycolide)/chitosan/hydroxyapatite (PLGA/chitosan/HA) conduits were manufactured by a combined solvent casting and particulate leaching technique. The conduits were highly porous with an interconnected pore structure and 76.5% porosity. Micropores with 50–100 micrometer diameter were formed in the conduits. In vivo application of PLGA/chitosan/HA conduits for reconstruction of 10 mm sciatic nerve defect was assessed by the walking track analysis, the quantifying of the wet weight of tibialis anterior muscle and the histological assessment. The conduits in host rats in vivo can not only be an effective in promoting regenerating of nerves but can also lead to favorable nerve functional recovery. Funded by the National Natural Science Foundation of China(No.50774096)     

Deformation resistance effect of PAN-based carbon fibers

The deformation resistance effect of polyacrylonitrile (PAN)-based carbon fibers was investigated, and the variatipn law of electrical resistivity under tensile stress was analyzed. The results show that the gauge factor (fractional change in resistance per unit strain) of PAN-based carbon fibers is 1.38, which is lower than that of the commonly-used resistance strain gauge. These may due to that the electrical resistivity of carbon fibers decreases under tensile stress. In addition when the carbon fibers are stretched, the change of its resistance is caused by fiber physical dimension and the change of electric resistivity, and mainly caused by the change of physical dimension. The mechanical properties of carbon fiber monofilament were also measured. Funded by the National Natural Science Foundation of China (No. 10672128 and 50878170)     

Sonochemical synthesis of core/Shell structured CdS/TiO<Subscript>2</Subscript> nanocrystals composites

A simple sonochemical route for the surface coating of titanium dioxide on cadmium sulfide nanocrystal was reported. After 2 h ultrasonic irradiation treatment, the mixture of CdS nanocrystals and tetrabutyl titanate in an aqueous medium yielded CdS/TiO₂ nanocrystals composites with core/shell structure. The thickness of TiO₂ layer with smooth interface could be easily controlled via changing the concentration of the precursors and the time of irradiation. The core/shell nanocrysrals were characterized by X-ray diffraction, transmission electron microscope and UV-vis spectrometry techniques. The prepared semiconductor composites with particular band structure present appealing properties especially in photochemical activity.