气体控制参数对气体辅助成型产品翘曲的影响

从气体辅助注射成型工艺的角度探讨了气体的延迟时间和第一段压力这两个关键的参数对槽的影响进而对产品翘曲变形的影响，结果表明：虽然通过使用气体辅助注射成型技术能改善产品变形，但并不能完全消除变形；造成产品变形的原因和机理十分复杂，只有进行从设计到工艺的全方位考察才能有效的控制变形，气体手指效应也是造成产品变形的一个重要因素，工艺上可以通过调整延迟时间和气体压力来减小产品的变形量。     

基于文献计量的国际河流栖息地研究动态

河流栖息地是水域生态系统的重要组成部分,以Web of Science论文数据库为数据源,利用TDA等工具对2015-2017年国际河流栖息地研究进行文献计量分析。结果表明:该领域研究方向涉及环境科学与生态学、海洋与淡水生物学等多个学科;美国的发文量最高,中国居于第2位;"保护"、"河流"、"鱼类"和"气候变化"是热点关键词;当前河流栖息地研究动态集中于风险评估与生态修复、水生生物群落、外来生物入侵、栖息地的地貌变化等方面。     

半透明氮化硅陶瓷的放电等离子烧结制备及性能

用放电等离子烧结(spark plasma sintering,SPS)技术,以质量分数(下同)为9%氮化铝(A1N),3%氧化镁(MgO)为烧结助剂,在1850℃烧结5min,成功制备了半透明氮化硅(Si3N4)陶瓷.半透明Si3N4陶瓷在中红外波段表现出良好的透过率,最大透过率为66.4%.SPS的快速致密化过程保证了烧结体具有良好的晶体结构,有利于提高透过率.SPS快速的烧结过程和A1N和MgO的加入能够有效抑制烧结过程中Si3N4陶瓷由α相向β相的转变,是制备光学性能良好的Si3N4陶瓷的关键.报道了半透明Si3N4陶瓷的其他性能.光学性能与其他性能的结合,势必大大拓宽Si3N4陶瓷的应用领域.     

湄洲湾电厂爆破振动控制

为控制湄洲湾电厂水下钻爆工程中爆破振动影响,结合规范和现场试验反馈制订了振动控制标准。采用NUBOX-6016爆破测振仪对爆破作业进行振动跟踪监测,由爆破振速监测数据的反馈对每次爆破的最大单响药量作适当调整。通过控制最大单响药量、优化爆破网络等措施有效控制了爆破振动危害,避免了施工扰民发生。     

后掺粗骨料工艺对高性能泵送混凝土性能影响研究

为解决建筑工程中高性能泵送混凝土的环境问题、成本问题,基于粗骨料嵌锁效应和界面水灰比强度理论,在保证高性能和泵送要求的条件下,提出了后掺骨料工艺,并对不同粗骨料后掺比例下的混凝土进行了力学性能和抗冻性能的研究。结果表明,随着粗骨料后掺比例的增大,7 d、28 d混凝土抗压强度持续增大,而28 d混凝土劈裂抗拉强度和抗折强度均呈先增大后减小的趋势;在冻融循环作用下,质量损失率的上升速率呈先减小后增大的趋势,而抗压、抗拉、抗折强度、动弹性模量以及超声波速的下降速率均呈先减小后增大的趋势。据此建议本C30高性能泵送混凝土的粗骨料最佳后掺比例为20%。     

安阳市水资源生态足迹与生态承载力研究

利用水资源生态足迹分析方法对安阳市2005~2014年的水资源生态足迹、生态承栽力进行了计算分析。结果表明,2005~2014年安阳市人均水资源生态足迹均值为0.45 hm~2/cap,且呈波动下降趋势。其中生产用水生态足迹占水资源生态足迹比重最大,达82.8%~91.4%,生活用水足迹其次,生态用水足迹最小,但呈上升趋势。安阳市水资源人均生态承载力较小,在0.048 hm~2/cap~0.068 hm~2/cap之间,受气候、水文起伏波动较大。安阳市2005—2014年间,水资源生态足迹均处于赤字状态,说明安阳市水资源利用长期以来一直是不可持续的。近10年来,安阳市万元GDP水资源生态足迹整体呈较快下降趋势,表明安阳市水资源利用效率正逐步提高。     

On the complexity of role updating feasibility problem in RBAC

In Role Based Access Control (RBAC) systems, it is necessary and important to update the role–permission assignments in order to reflect the evolutions of the system transactions. However, role updating is generally complex and challenging, especially for large-scale RBAC systems. This is because the resulting state is usually expected to meet various requirements and constraints. In this paper, we focus on a fundamental problem of role updating in RBAC, which determines whether there exists a valid role–permission assignment, i.e., whether it can satisfy all the requirements of the role updating and without violating any role–capacity or permission–capacity constraint. We formally define such a problem as the Role Updating Feasibility Problem (RUFP), and study the computational complexity of RUFP in different subcases. Our results show that although several subcases are solvable in linear time, this problem is NP-complete in the general case.     

Laplacian group sparse modeling of human actions

Recently, many local-feature based methods have been proposed for feature learning to obtain a better high-level representation of human behavior. Most of the previous research ignores the structural information existing among local features in the same video sequences, while it is an important clue to distinguish ambiguous actions. To address this issue, we propose a Laplacian group sparse coding for human behavior representation. Unlike traditional methods such as sparse coding, our approach prefers to encode a group of relevant features simultaneously and meanwhile allow as less atoms as possible to participate in the approximation so that video-level sparsity is guaranteed. By incorporating Laplacian regularization the method is capable to ensure the similar approximation of closely related local features and the structural information is successfully preserved. Thus, a compact but discriminative human behavior representation is achieved. Besides, the objective of our model is solved with a closed-form solution, which reduces the computational cost significantly. Promising results on several popular benchmark datasets prove the efficiency and effectiveness of our approach.     

Manipulating the phase morphology in PPS/PA66 blends using clay

By adding a small amount of clay into poly(p‐phenylene sulfide) (PPS)/polyamide 66 blends, the morphology was found to change gradually from sea–island into cocontinuity and lamellar supramolecular structure, as increasing of clay content. Clay was selectively located in the PA66 phase, and the exfoliated clay layers formed an edge‐contacted network. The change of morphology is not caused by the change of volume ratio and viscosity ratio but can be well explained by the dynamic interplay of phase separation between PPS and PA66 through preferential adsorption of PA66 onto the clay layers and through layer–layer repulsion. This provides a means of manipulating the phase morphology for the immiscible polymer blends. The mechanical and tribological properties of PPS/PA66 blends with different phase morphologies (different clay contents) were studied. Both tensile and impact strength of the blends were found obviously increased by the addition of clay. The antiwear property was greatly improved for the blends with cocontinuous phase form. Our work indicates that the phase‐separating behavior of polymer blends contained interacting clay can be exploited to create a rich diversity of new structures and useful nanocomposites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007