Acoustical tomography based on the second-order Born transformperturbation approximation

Reconstruction algorithms and their numerical examples of acoustical tomography based on the second-order Born transform perturbation approximation are presented. The reconstruction algorithms in the second-order Born approximation are similar in form to those in the first-order Born approximation. Replacing the angular spectrum of the scattered wave in the first-order case by the result of applying a first-order operator to the angular spectrum of the scattered wave or applying a second-order operator to the angular spectrum of the incident wave leads to the second-order reconstruction algorithms. Also, comparisons of reconstruction algorithms of the first- and second-order Born approximations are given, and they show that the second-order Born approximation algorithms have a distinct advantage over the first-order approximations in many cases     

耦合腔激光器的波长调谐与频率调制特性分析

考虑用激光器与调制器直接耦合以及耦合槽的影响，用散射矩阵法及二步等效反射率法，对沟槽耦合腔激光器的波长调谐和频率调制特性的分析表明，数学处理简单，物理图像清晰。     

SIMILARITY LAW OF FLUCTUATING PRESSURE WITHIN HYDRAULIC JUMP AREA

Through a series of model tests of five scales for 2-D free hydraulic jump, the da-ta of fluctuating pressure acting on the floor level within the hydraulic jump were obtained. Dur-ing the experiments, Froude number varied from 2.94 to 8.61, and Reynolds number rangedfrom 2×10~4 to 6×10~5. Experiment results indicate that the amplitude scale of fluctuating pres-sure is the length scale of model, i. e. P'=L, which agrees with gravity similarity law: Thefrequency scale of the fluctuating pressure is a unity i. e., f=1, which does not satisfy thegravity similarity law.     

^60Coγ射线对刚地弓形虫缓殖子感染性的影响

应用不同剂量的~(60)Coγ射线照射含NT株弓形虫包囊的鼠脑匀浆后,以0.4％胰蛋白酶液消化,使弓形虫缓殖子从包囊中释放出来,并用生理盐水作连续10倍稀释,使成为含不同数量缓殖子的悬液,将此悬液接种小鼠,用生物检测方法确定其感染性。另设未经照射处理的缓殖子悬液感染小鼠的对照组。结果表明,γ射线0.55kGy剂量为控制鼠脑中NT株弓形虫感染性的最小有效剂量。γ射线0.1kGy剂量对弓形虫缓殖子感染性无明显影响,而0.45kGy照射后,其感染性较前者下降了10~4倍。     

作大范围运动的空间桁架结构动力分析

作高速大范围运动的弹性体，由于运动和变形的耦合将产生动力刚化现象，传统的动力学理论难以计及这种影响。本文在有限元方法中首次引入了单元耦合形函数（阵），以此将单元弹性位移表示为单元结点位移的二阶小量形式。利用几何非线性的应变－位移关系式，在小变形假设条件下确定了单元耦合形函数。在此基础上，根据Ｋａｎｅ方程，运用模态坐标压缩，并通过适当的线性化处理，得到了一致线性化的动力学方程。编制了计及动力刚化的空间桁架结构有限元分析程序。仿真算例的计算结果验证了理论和算法的正确性     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

导弹发射车起竖机构分析

对导弹发射车的起竖机做较全面的分析，提出了在解析法的基础上，用计算机设计起竖机构的方法。做到对不同设计方案进行快速比较和选择，提高了设计质量和效率。     

基于拓扑法的多关节机械手无碰路径规划

本文提出了一种基于拓扑法的多关节机械手无碰路径规划方法,文中重点讨论了三关节机械手路径规划时如何划分状态空间、判别各连通块之间的连通性以及路径搜索等问题,最后我们给出了一个实验结果以示该方法的有效性。