Thiol-ene emulsion polymerization using a semi-continuous approach

The thermally initiated thiol-ene emulsion polymerization of diallyl phthalate (DAP) diene and ethylenedioxy diethanthiol (EDDT) dithiol monomers in batch and semibatch emulsion polymerization is investigated. The batch process leads to larger and broader particle sizes than when the polymerization is carried out in semibatch. The evolution of the particle size and the final particle size distribution indicate that the stability of the latexes is limited and, hence, aggregation phenomena occurred in both processes. In particular, the evolution of the particle size distribution (PSD) in the semibatch process indicates nucleation, growth, and aggregation occurring simultaneously that produced a bimodal particle size. When the diene monomer was changed to diallyl terephthalate (DATP), the semibatch polymerization yielded smaller particles and narrow distribution without any indication of aggregation. The partial substitution of the dithiol by a trithiol monomer that is substantially more water insoluble affected nucleation of the particles, yielding for both systems smaller particles. The polythioether polymers synthesized present low glass transition temperatures (~ −30/−40°C) and those containing the therephthalate yield crystalline films. The potential application of the polymers as pressure sensitive adhesives (PSAs) was preliminarily assessed.     

Enhancing Planar Inverted Perovskite Solar Cells with Innovative Dumbbell-Shaped HTMs: A Study of Hexabenzocoronene and Pyrene-BODIPY-Triarylamine Derivatives

Dumbbell-shaped systems based on PAHs-BODIPY-triarylamine hybrids TM-(01-04) are designed as novel and highly efficient hole-transporting materials for usage in planar inverted perovskite solar cells. BODIPY is employed as a bridge between the PAH units, and the effects of the conjugated π-system's covalent attachment and size are investigated. Fluorescence quenching, 3D fluorescence heat maps, and theoretical studies support energy transfer within the moieties. The systems are extremely resistant to UVC 254 nm germicidal light sources and present remarkable thermal stability at degradation temperatures exceeding 350 °C. Integrating these systems into perovskite solar cells results in outstanding power conversion efficiency (PCE), with TM-02-based devices exhibiting a PCE of 20.26%. The devices base on TM-01, TM-03, and TM-04 achieve PCE values of 16.98%, 17.58%, and 18.80%, respectively. The long-term stability of these devices is measured for 600 h, with initial efficiency retention between 94% and 86%. The TM-04-based device presents noticeable stability of 94%, better than the reference polymer PTAA with 91%. These findings highlight the exciting potential of dumbbell-shaped systems based on PAHs-BODIPY-triarylamine derivatives for next-generation photovoltaics.     

Spark Discharge Doping—Achieving Unprecedented Control over Aggregate Fraction and Backbone Ordering in Poly(3-hexylthiophene) Solutions

The properties of semiconducting polymers are strongly influenced by their aggregation behavior, that is, their aggregate fraction and backbone planarity. However, tuning these properties, particularly the backbone planarity, is challenging. This work introduces a novel solution treatment to precisely control the aggregation of semiconducting polymers, namely current-induced doping (CID). It utilizes spark discharges between two electrodes immersed in a polymer solution to create strong electrical currents resulting in temporary doping of the polymer. Rapid doping-induced aggregation occurs upon every treatment step for the semiconducting model-polymer poly(3-hexylthiophene). Therefore, the aggregate fraction in solution can be precisely tuned up to a maximum value determined by the solubility of the doped state. A qualitative model for the dependences of the achievable aggregate fraction on the CID treatment strength and various solution parameters is presented. Moreover, the CID treatment can yield an extraordinarily high quality of backbone order and planarization, expressed in UV–vis absorption spectroscopy and differential scanning calorimetry measurements. Depending on the selected parameters, an arbitrarily lower backbone order can be chosen using the CID treatment, allowing for maximum control of aggregation. This method may become an elegant pathway to finely tune aggregation and solid-state morphology for thin-films of semiconducting polymers.     

Messmodelle im Ingenieurbauwesen. Eine Bilanz

Measurement models in civil engineering. A review The research project “‘Last Witnesses’ Measurement Models in Civil Engineering – Scientific Significance and Preservation” was funded as part of the priority program 2255 “Construction as Cultural Heritage” of the German Research Foundation (DFG) and consists of three sub-projects divided between the University of Innsbruck, the Karlsruhe University of Applied Sciences and the Technical University of Munich. The project aimed to locate the last surviving measurement models in German-speaking countries, document them, classify them in terms of construction history, digitise them and evaluate their state of conservation. This report is intended to provide an overview of the initial situation, the approaches, the difficulties and the results and findings achieved in the project.