Einfluß der Produkteigenschaften auf die Trocknung

Influence of Product Properties on Drying. A number of items of information are required for selection and design of a drying process. Thermodynamic equilibrium as well as heat and mass transfer are the traditional prerequisites for describing the drying operation. In the development of a drying process further specific properties of the product must be known. These properties, such as chemical reactions or sticking properties, greatly reduce the number of possible drying processes. For this reason, the measurement of these properties plays an important role in the development of a drying process. Many of the bench scale tests in use do not have a physical basis, but have been developed empirically because the physical context is often unknown. Yet a number of physically well-defined methods are available for product characterization. In practical work a combination of empirical and scientifically defined methods is used.     

Elektroisolierstoffe mit hoher Wärmebeständigkeit

Electrical Insulating Materials with High Thermal Stability Polymers to be classified into the group of highly thermostable materials must possess certain properties even at elevated temperatures. Thermostable substances suitable for electrical insulation possess good insulating properties at high temperatures. Materials with high thermal stability have found their way in the field of electrical insulation, especially in wire coatings. Such materials are polyesters of terephthalic acid, polyimides, polyamidimides and esterimides. The processes for the preparation and properties of these polymers are described. Furthermore a few polymers are mentioned, whose chemical structure deserve special attention.     

A Complete and Highly Effective Mothproofing Agent Comprising a Pyrethroid and a Hexahydropyrimidine

Pyrethroids, considered as a general class of compounds, have been shown to provide effective protection from the larvae of the keratin-digesting insects Tineola bisselliella H., Tinea pellionella Linn., Hofmannophila pseudo-spretella Station and Attagenus piceus Oliv. The position regarding the susceptibility of the furniture carpet beetle to pyrethroids is less clear, however. It has been reported that both deltamethrin and permethrin are effective against Anthrenus flavipes Le Conte, whilst permethrin is also reported elsewhere to be effective against the same species. Results obtained in our laboratory, however, have indicated that pyrethroids may offer inadequate protection against Anthrenus vorax Waterh. [1, 2]. This latter species is identical to Anthrenus flavipes var. seminiveus Casey, a colour variety of Anthrenus flavipes Le Conte. The 1,3-disubstituted5-phenylcarbamoyl-2,4,6-trioxo- and 4,6-dioxo-2-thione-hexahydropyrimidine derivatives described in this paper exhibit a surprisingly high and selective toxicity to the Anthrenus species. Thus, a combination of an appropriate hexahydropyrimidine with a suitable pyrethroid, e.g. permethrin, provides complete control of a wide range of commonly encountered textile insect pests. The influence of substituents on the mothproofing activity is discussed.     

Wasserlösliche hochpolymere als strömungsbeschleuniger

Soluble high polymers drastically reduce the friction or drag of turbulent wall flows; this effect is widely known as drag reduction. In practical applications drag reducing polymers also bring about an increase in flow rate. That is why we have introduced the term flow enhancer for this type of polymer. Drag reduction by polymers was discovered in 1948. The addition of very small amounts (ppm) of a high polymer reduces the pressure drop in turbulent pipe flow by up to 80 % or increases the flow rate by up to 100 %. These rheological effects are demonstrated with the aid of laboratory experiments. A physical model is presented which describes the interference of the coiled macromolecule in turbulent boundary layers with elongational velocity gradients. From this theory are derived a number of requirements for particularly effective macromolecules, such as molar mass, conformation, linearity and electrical charges in the molecule. The well-known water soluble drag reducing polymers are presented and the influence of pH, electrolytes and temperature described. Finally a survey of practical applications with experiments describing the operation of a specially designed flow enhancer for hydrotransport of sand slurries is given.     

Erratum to: Minimizing total tardiness on parallel machines with preemptions

In this note, we correct a mistake which was made in the paper “Minimizing Total Tardiness on Parallel Machines with Preemptions” (see J Schedul 15:193–200, 2012).     

Determination of absolute emission cross sections for electron-impact-induced line radiation in the vacuum ultraviolet

A method and an experimental setup have been developed for measuring absolute photoemission cross sections for electron-impact-induced line radiation in the vacuum ultraviolet (VUV). Unparalleled low uncertainties for the cross sections were achieved mainly from the use of the Berlin electron storage ring as a primary standard source in the VUV for the determination of the responsivity of the spectrometer-detector system used and from the use of a spinning rotor gauge as a secondary standard for the determination of the target gas density. As the first result we present a photoemission cross section for the Ar II 3s3p(6)(2)S(?)-3s(2)3p(5)(2)p?(3/2) transition at 91.98 nm for 2-keV electron-impact energy of 1.167 × 10(-18) cm(2) with a relative uncertainty of 4.4% (√3σ value). This low uncertainty demonstrates the suitability of the setup for further cross-section measurements.     

Investigation of charge carrier depletion in freestanding nanowires by a multi-probe scanning tunneling microscope

Profiling of the electrical properties of nanowires (NWs) and NW heterocontacts with high spatial resolution is a challenge for any application and advanced NW device development. For appropriate NW analysis, we have established a four-point prober, which is combined in vacuo with a state-of-the-art vapor-liquid-solid preparation, enabling contamination-free NW characterization with high spatial resolution. With this ultrahigh-vacuum-based multi-tip scanning tunneling microscopy (MT-STM), we obtained the resistance and doping profiles of freestanding NWs, along with surface-sensitive information. Our in-system 4-probe STM approach decreased the detection limit for low dopant concentrations to the depleted case in upright standing NWs, while increasing the spatial resolution and considering radial depletion regions, which may originate from surface changes. Accordingly, the surface potential of oxide-free GaAs NW {112} facets has been estimated to be lower than 20 mV, indicating a NW surface with very low surface state density.

Open image in new window

     

High-resolution venography of the brain using magnetic resonance imaging

The purpose of this study was to evaluate a non-flow related magnetic resonance imaging method to visualize small veins independent of arteries in the human brain. A long TE, high-resolution 3D gradient echo MR acquisition was used to highlight venous information. The method is based on the paramagnetic property of deoxyhemoglobin and the resulting phase difference between veins and brain parenchyma at long echo times. The MR magnitude images were masked with a phase mask filter to enhance small structure visibility.. Venous information down to sub-pixel vessel diameters of several hundred microns is visible. Venous data are displayed in an angiographic manner using a minimum intensity projection algorithm. Both superficial veins and deep white matter veins are visible. The method has been successfully applied in volunteers. Preliminary results in patients with cerebral arteriovenous malformations indicate its potential in clinical applications. The proposed method is easy to implement and does not require administration of a contrast agent or application of specially designed rf pulses to highlight the veins. Rather it exploits the intrinsic magnetic properties (BOLD-effect) and the prolonged T ^_2* of venous blood. The method may be of diagnostic potential in the assessment of arteriovenous malformations or other vascular venous lesions. © 1998 Elsevier Science B.V. All rights reserved.     

Pressure dependence of superconductivity in Ba4C60

In Ba_xC₆₀ superconductivity (sc) at T_c=(6.8±0.2) K is associated with the x=4 phase. Here we present pressure studies of T_c of a Ba_xC₆₀ sample (dT_c/dp= –1.9 K/GPa) which exhibits a large volume fraction of the x=4 phase. In the alkali-fullerides K₆₀C₆₀ and Rb₃C₆₀ T_c is governed by the electronic density of states N(E_F) (T_c exp{–1/N(E_F)V}). The dependence of N(E_F) on volume can be approximated by N(E_F)=N₀ d _eff ³, where d_eff is the surface to surface distance of neighboured C₆₀-molecules. This relationship is corroborated by (T_C,d)-data of various compounds of the form A_3–xB_xC₆₀ (A: K, Rb; B: K, Rb, Cs; x2). Strong deviation from this behavior is found for the alkaline-fulleride superconductor Ba₄C₆₀. This deviation is attributed to the hybridization of alkaline-metal s-, d-states and C₆₀ -states.