Über die Ausbildung von Gittereigenverformungen in Stählen nach bleibender einachsiger Dehnung

Untersuchung von Eigenspannungen an zwei Stählen mit rd. 1,6% C und einem Gefüge aus Perlit und übereutektoidischem, teilweise netzförmig vorliegendem Zementit nach einachsiger bleibender Dehnung bis zu 2,3% mit röntgenographischen Messungen. Ausbildung von Druckeigenspannungen im Ferrit und Zugeigenspannungen im Zementit. Erklärung der Ergebnisse unter besonderer Berücksichtigung des scheinbaren Ungleichgewichtes zwischen Mikrozug- und -druckeigenspannungen.     

Nanostructured titania powders by hydrothermal processing and spray drying

Sol-gel precipitates of titania were prepared from organometallic precursors, followed by hydrothermal crystallization and spray drying into spherical, micron-size nanostructured granules that were characterized by X-ray diffraction, nitrogen adsorption, and microscopy. A systematic investigation of the effect of hydrothermal processing conditions on the physical properties of the granules was carried out. When the hydrothermal processing time was increased, product granules exhibited larger anatase crystallite size and improved thermal stability in pore structure and phase composition. Increasing the hydrothermal processing temperature retarded crystallite growth and increased the anatase-to-rutile transformation temperature.     

Model Checking

Die Gewährleistung der korrekten Funktionsweise von Hard- und Software ist ein entscheidender Faktor bei der heutigen Systementwicklung. Dies trifft ganz besonders auf das Gebiet der sog. sicherheitskritischen Systeme zu, bei dem ein Systemversagen Menschenleben gefährden kann.     

Concentration and distribution of platinum group elements (Pt, Pd, Rh) in airborne particulate matter in Frankfurt am Main, Germany

The concentrations and distribution of platinum group elements (Pt, Pd, Rh) in airborne particulate matter were studied in a period of one year from August 2001 to July 2002 in urban and in nonurban areas. Airborne dust samples were collected as a total amount (particles with an aerodynamic diameter <22 microm) and classified using an eight-stage Andersen impactor (<10 microm) at three locations with different traffic density roads in the Frankfurt am Main and nonurban areas. Sampling at the three locations was performed simultaneously for total airborne dust and fractionated airborne dust. Pd was determined by total reflection X-ray fluorescence after Hg coprecipitation. Pt and Rh were analyzed by adsorptive striping voltammetry after HPA digestion. The results show that the PGE concentrations in airborne samples depend on the traffic density. The highest PGE concentrations in air were found in the vicinity of major roads with heavy traffic, and the lowest ones were found in the nonurban area. The presence of PGE at the sampling station relatively free of traffic in a nonurban area hints to a transport of some of the emitted PGE from the city to this station by wind. At all three sampling locations, a heterogeneous distribution of the Pd, Pt, and Rh concentrations during the sampling year can be observed. The sum of PGE concentrations in total airborne dust is comparable with the sum of impactor samples. However, the concentration of Pt and Rh in total airborne dust (<22 microm) is on average higher than in impactor samples (<10 microm). On the contrary, Pd concentration is higher in impactor samples in most cases. The airborne PGE distribution is dominated by Pt, followed by Pd and Rh. The impactor samples are dominated by Pd, followed by Pt and Rh. This fact indicates that palladium occurs mainly in relatively fine airborne particles. The main fraction of PGE is found on average in particle sizes between 1.1 and 4.7 microm. Knowledge of the size distribution of particles containing PGE is important with respect to risk assessment of human inhalation.     

Die Bestimmung des Wärmeinhalts und der spezifischen Wärme von Schmelzkalkkristallen zwischen 0 und 1720 °C

Entwicklung verschiedener Kalorimeteranordnungen zur Bestimmung des Wärmeinhalts zwischen 0 und 25, 25 und 65, 25 und 1400 und zwischen 25 und 1720 °C. Die mittlere und wahre spezifische Wärme von Schmelzkalk (Kristallkalk). Vergleich der Ergebnisse mit Angaben des Schrifttums über gebrannten Kalk.     

Parameter pe′ der Elektronenteilleitfähigkeit in ZrO2(CaO)- und ThO2(Y2O3)-Festelektrolyten bei 1200 bis 1650 °C

Bestimmung des Parameters p_e′ (t_ion = 0,5) zur Kennzeichnung der Elektronenteilleitfähigkeit in festen Elektrolyten. Anwendung einer abgewandelten Polarisationsmethode mit EMK-Messung. Angabe der Parameter p_e′ für Festelektrolyte aus ZrO₂ mit einem Molenbruch x_CaO = 0,14 und aus ThO₂ mit einem Molenbruch bei Temperaturen zwischen 1200 und 1650 °C. Berechnung korrigierter Eichkurven für die elektrochemische Messung der Sauerstoffaktivitäten in Stahlschmelzen. Empfehlung einer bevorzugten Anwendung von ThO₂(Y₂O₃)-Elektrolyten zur Messung kleinster Sauerstoffaktivitäten.     

Intercalibration of SUMER and CDS on SOHO. II. SUMER Detectors A and B and CDS NIS

Results of an intercalibration between the extreme-ultraviolet spectrometers Coronal Diagnostic Spectrometer (CDS) and Solar Ultraviolet Measurements of Emitted Radiation (SUMER) on board the Solar and Heliospheric Observatory (SOHO) are reported. The results of the joint observing program Intercal_01 are described, and intercalibration results up to July 2000 of both SUMER detectors A and B and of the CDS Normal Incidence Spectrometer (NIS) are presented. The instruments simultaneously observed radiance of emission lines at the center of the Sun, and three lines have been chosen for intercomparison: He i 584 A, Mg x 609 A, and Mg x 624 A. Initially the same area was observed by both instruments, but, after restrictions were imposed by the scanning mechanism of SUMER in November 1996, the instruments viewed areas of different sizes. Nevertheless, the temporal correlation between the two instruments remained good through June 1998, when contact with the SOHO spacecraft was lost. Until then the CDS instrument measured (33 ? 5)% and (38 ? 7)% (?1varsigma) higher intensity than SUMER in the He i 584-A line on average for detectors A and B, respectively. Data from SUMER detector B agreed well for Mg x 609 A and Mg x 624 A with the CDS intensities, showing offsets of (2 ? 10)% and (9 ? 15)%, much less than the data of detector A with offsets of (7 ? 8)% and (16 ? 7)% for the two lines, respectively, relative to CDS. Finally, the intercalibration measurements after the loss and recovery of the SOHO spacecraft are analyzed. The data for observations from November 1998 to July 2000 are compared, and it is shown that, although the responses of the instruments have changed, the CDS and the SUMER still perform well, and their temporal correlation is good.     

Modelling the effects of (green) antifungals, droplet size distribution and temperature on mould outgrowth in water-in-oil emulsions

Prevention of fungal spoilage is a key microbiological issue for the shelf life of fat spreads. Our aim was to assess and model the scope of (natural) antimicrobials for extending shelf life of spreads (water-in-oil emulsions). Production conditions were established to make 60% model fat spreads with reproducible droplet size distributions. The mould vulnerabilities ranged from 1 to 20 weeks. The system allowed feasibility testing of lytic enzymes (Novozym 234) and LMW compounds against Penicillium roqueforti, a key-spoilage mould. The action of Novozym 234, carvacrol, undecanol and dihydrocarveol was benchmarked against sorbate and preservative-free controls under ambient and chilled conditions. Novozym 234 was ineffective to prevent outgrowth of P. roqueforti. Carvacrol, undecanol and dihydrocarveol had limited effects on shelf-life extension compared to sorbate. Fungal growth boundaries of (un-)preserved spreads were modelled. The emulsion droplet size distribution (DSD) was first captured in a mechanistic parameter DSD-I (I = Influence). DSD-I was a move away from the mean droplet diameter D3,3 as sole quantitative droplet-size distribution parameter for mould susceptibility of emulsions. DSD-I is a combination of available water droplets and surface area to initiate and sustain fungal outgrowth. Followup experiments showed that modelling D3,3 and distribution width (e(sigma)) instead of DSD-I gave better results for emulsions with high e(sigma). Empirical predictive models were subsequently developed for the effects of D3,3, e(sigma) and undissociated sorbic acid (HSO) on the shelf life of emulsions.     

Collision cascades in pure <Emphasis Type="Italic">δ</Emphasis>-plutonium

Molecular dynamics simulations of the formation and annealing of large collision cascades in delta-phase plutonium are presented. The defect evolution is followed with time up to 2 ns. Simulations are performed with the MEAM potential at three different temperatures; at 600 K where the pure delta phase is thermodynamically stable; at 300 K where the delta phase can only be maintained in a metastable state with minor additions of gallium or aluminum; and at 180 K where plutonium should transform to the alpha phase. It is found in all three cases that the atomic structure within the cascade evolves through a glass-like state. At 600 K, this structure recovers very slowly; at 300 K it persist up to 2 ns with no discernable trend to recover eventually; and at 180 K the amorphous structure initiated by the collision cascade spreads through the entire crystal and converts it to a glass-like structure.