基于DSP的非接触式生命参数获取及信息处理技术研究

介绍了一种通过DSP对非接触式生命参数信号进行采集和处理的系统。论述了该系统的软硬件设计以及预处理电路,通过预处理电路放大生命信号、滤除噪声,由AD7705进行采集,送入DSP进行后续处理。详细阐述了AD和DSP的工作方式、接口电路以及软件实现。通过HK2000Cv2.0脉搏传感器仿真非接触情况下人体心跳信号并进行采集。实验证明,该系统可以成功的检测到人体的心跳信号进行显示并对信号做基本的处理。     

A 1.8-V distributed voltage-controlled oscillator module for 5.8-GHz ISM band

This letter presents the design and implementation of a 1.8-V 5.8-GHz distributed voltage-controlled oscillator module based on bipolar transistors. The oscillator delivered -2-dBm-output power with a current consumption of 11.5 mA. The tuning range achieved was 650 MHz. The measured phase noise was -100 dBc/Hz at 1-MHz offset. The circuit construction was simple and robust and no buffer amplifier was needed. The design can be used for 5.8-GHz ISM band wireless LAN applications.     

MPPA光动力作用诱导人鼻咽癌细胞凋亡的实验研究

为观察MPPa光动力作用对鼻咽癌细胞凋亡的影响,应用AnnexinV—PI双染结合流式细胞仪分析MPPa光动力作用后人鼻咽癌细胞株CNE2细胞发生凋亡和继发性坏死的比率。结果显示MPPa光动力作用实验组人鼻咽癌细胞株CNE2细胞发生凋亡和继发性坏死的比率分别增加到16.43 %和4.64 % ,且均显著高于单纯光照射组、单纯MMPa光敏剂处理组和假照射组(P <0 .0 1) ,而三对照组间无明显差异(P >0 .0 5 )。表明MPPa光动力作用能有效诱导低分化人鼻咽癌细胞株CNE2细胞凋亡的发生。这也可能是MPPa光动力作用杀伤鼻咽癌的重要机制之一。     

Two-Dimensional Adaptive Decimation and Interpolation Scheme for Low Bit-Rate Image Coding

A novel image compression scheme based on two-dimensional adaptive decimation is reported in this paper. In this approach, images are encoded with adaptive sampling along the horizontal and vertical directions, and decoded with an edge prediction interpolation algorithm. The method is capable of maintaining reasonable coding fidelity at low bit-rate with good visual quality. As only a small amount of computation is required in the encoding and decoding processes, the compression scheme can be implemented for real time operation with simple hardware and a small amount of memory storage. The proposed scheme had been applied in encoding images at bit-rates between 0.2 and 0.33 bpp and the results are encouraging.     

Autotuning of phase-lead controller for integrating systems

In this paper, a new method for autotuning of a phase-lead controller for nonselfregulating or integrating systems is proposed. By connecting the system with a suitable high-order derivative filter and a relay with hysteresis, the frequency data of the system can be obtained and phase-lead controllers can be designed based on some phase margin specifications. Simulations and experimental studies are included in the paper to illustrate the performance of the proposed algorithm     

A unified spectrum sensing and throughput analysis model in cognitive radio networks

Cognitive radio (CR) is a newly developed technology for increasing spectral efficiency in wireless communication systems. In the CR networks, there exist two traditional spectrum‐sharing technologies called spectrum overlay and spectrum underlay. A new hybrid overlay/underlay paradigm has also been discussed in the literature. In this work, we create a unified spectrum sensing and throughput analysis model, which is suitable for overlay, underlay, and hybrid overlay/underlay paradigms in the CR networks. In the proposed model, the energy detection scheme is employed for the spectrum sensing in the network in which the co‐channel interference is present among primary users and secondary users (SUs). The SUs' throughput in the proposed CR system model is then analyzed. The simulations are also carried out for demonstrating the performance of overlay, underlay, and hybrid overlay/underlay paradigms. Copyright © 2013 John Wiley & Sons, Ltd.     

Lightweight,Superelastic Boron Nitride/Polydimethylsiloxane Foam as Air Dielectric Substitute for Multifunctional Capacitive Sensor Applications

Porous polymeric foams as dielectric layer for highly sensitive capacitive based pressure sensors have been extensively explored owing to their excellent flexibility and elasticity. Despite intensive efforts, most of previously reported porous polymer foams still suffer from difficulty in further lowering the attainable density limit of ≈0.1 g cm^?3 while retaining high sensitivity and compressibility due to the limitations on existing fabrication techniques and materials. Herein, utilizing 3D interconnected networks of few‐layer hexagonal boron nitride foams (h‐BNFs) as supporting frameworks, lightweight and highly porous BN/polydimethylsiloxane composite foams (BNF@PDMS) with densities reaching as low as 15 mg cm^?3 and permittivity close to that of air are fabricated. This is the lightest PDMS‐based foam reported to date. Owing to the synergistic effects between BN and PDMS, these lightweight composite foams possess excellent mechanical resilience, extremely high compressibility (up to 95% strain), good cyclic performance, and superelasticity. Being electrically nonconductive, the potential application of BNF@PDMS as a dielectric layer for capacitive sensors is further demonstrated. Remarkably, the as‐fabricated device can perform multiple sensing functions such as noncontact touch sensor, environmental monitoring sensor, and high sensitivity pressure sensor that can detect extremely low pressures of below 1 Pa.     

Transition Metal Oxide Work Functions: The Influence of Cation Oxidation State and Oxygen Vacancies

Transition metal oxides are capable of a wide range of work functions. This quality allows them to be used in many applications that involve charge transfer with adsorbed molecules, for example as heterogeneous catalysts, as charge‐injection layers in organic electronics, and as electrodes in fuel cells. Chemical and structural factors can alter transition‐metal oxide work functions, often making their work functions difficult to control. Little is known about the effects of the cation oxidation state and point defects on the oxide work function. It is necessary to understand how such chemical and structural factors affect work functions in order to controllably tune transition metal oxides for desired applications. Here, a correlation between the oxide work function and cation oxidation state is demonstrated. This correlation is attributed to the change in cation electronegativity with oxidation state. A model is presented that relates the work function to the oxygen deficiency for d⁰ oxides in the limit of dilute oxygen vacancies. It is proposed that the rapid initial decrease in work function, observed for d⁰ oxides, is caused by an increase in the density of donor‐like defect states. It is also shown that oxides tend to have decreased work functions near a metal/metal‐oxide interface as a consequence of the relationship between defects and work function. These insights provide guidelines for tuning transition metal oxide work functions.     

采用反射式液晶显示器和有机电致发光器件前后双置组合而成的高环境对比度显示器

一种高环境对比度(A-CR)和大开口率的显示器已经从理论上证明,并通过把一个正常显黑反射型显示器(NB-RLCD)和一个有机电致发光器件(OLED)堆垛的实验加以证明。这种前后双置(以下称为tandem型)的器件组合可以分别在明亮或昏暗的环境下切换NB-RLCD模式或OLED模式。RLCD的正常显黑特性也可以提升OLED模式工作时的A-CR性能。为了在RLCD模式下获得更好的图像品质,一个复杂并且具有传输功能的结构被用于消除镜面反射和提高可视角至CR﹥2:1超过55°的锥面可视角度。另外,这样的结构也可以提高OLED49.4%的表面量子效率。在我们的实验里,忽略环境亮度因素并使A-CR保持在100:1以上。     

Earliest Deadline First Scheduling with Active Buffer Management for Real-Time Traffic in the Internet

We studied the problem of QoS guarantee for differentiated services. A two-level hierarchical scheduling framework was deployed to separate QoS metrics. Due to its desirable property of minimizing the maximum packet lateness, the Earliest Deadline First (EDF) scheduling was adopted to provide the in-class scheduling for the time-sensitive traffic. We employed an EDF scheduler combined with an active buffer management scheme (CHOKe) to improve the fairness of resource allocation and to maintain a good delay performance for real-time applications. Simulation results showed that the proposed scheme can achieve a better delay performance and make a more fair bandwidth allocation between the real-time TCP and UDP connections than the First Come First Served (FCFS) scheduling with the drop-tail buffer management which is commonly deployed in traditional IP routers.