Effect of Antibiotic Amphotericin B Combinations with Selected 1,3,4-Thiadiazole Derivatives on RPTECs in an In Vitro Model

4-(5-methyl-1,3,4-thiadiazole-2-yl) benzene-1,3-diol (C1) and 4-[5-(naphthalen-1-ylmethyl)-1,3,4-thiadiazol-2-yl] benzene1,3-diol (NTBD) are representative derivatives of the thiadiazole group, with a high antimycotic potential and minimal toxicity against normal human fibroblast cells. The present study has proved its ability to synergize with the antifungal activity of AmB. The aim of this work was to evaluate the cytotoxic effects of C1 or NTBD, alone or in combination with AmB, on human renal proximal tubule epithelial cells (RPTECs) in vitro. Cell viability was assessed with the MTT assay. Flow cytometry and spectrofluorimetric techniques were used to assess the type of cell death and production of reactive oxygen species (ROS), respectively. The ELISA assay was performed to measure the caspase-2, -3, and -9 activity. ATR-FTIR spectroscopy was used to evaluate biomolecular changes in RPTECs induced by the tested formulas. The combinations of C1/NTBD and AmB did not exert a strong inhibitory effect on the viability/growth of kidney cells, as evidenced by the negligible changes in the apoptotic/necrotic rate and caspase activity, compared to the control cells. Both NTBD and C1 displayed stronger anti-oxidant activity when combined with AmB. The relatively low nephrotoxicity of the thiadiazole derivative combinations and the protective activity against AmB-induced oxidative stress may indicate their potential use in the therapy of fungal infections.     

Determination of the ash yield and the mineral matter content of brown coals by density measurements

A method of measuring the density of bed-moist brown coals based on their plastic properties is described and the feasibility of using the method for determination of the ash yield of the coal is evaluated.     

Integrated instrumental analysis of soft brown coals

A method for the simultaneous determination of calorific value Q^r, ash yieldA^r and total water content W^r_t of soft brown coals is described. The method involves instrumental analysis of brown coal samples using neutron thermalization and gamma back-scattering techniques. Over 80 coal samples (1.1 kg) were analysed, having Q^rvalues up to 15.5 MJ kg^?1,A^r ranging from 3.6 to 76.1 wt% and W^r_t ranging from 11.4 to 61.7 wt%. A comparison of the results from the instrumental method with those of standard laboratory analyses is given, followed by a discussion of the accuracy of the method and of possible ways for improving it.     

Preparation and Characterization of Energetic Nanocomposites of Organic Gel – Inorganic Oxidizers

Two types of polymeric sols, resorcinol‐formaldehyde (RF) and resorcinol‐furfural (RFur), were mixed in a water‐containing medium with aqueous solutions of inorganic salts: NH₄ClO₄, Mg(ClO₄)₂, and NH₄NO₃. After gelation and an ambient pressure drying, hybrid nanocomposites with properties of energetic materials were obtained. It was stated that salt concentration and addition of a second solvent (e.g., methanol or N,N‐dimethylformamide) to the mixture of reagents have crucial meaning for gel formation. In the case when only water was used, the mixture of organic sol/inorganic salt did not transfer from sol to gel, and precipitates were formed. Conventional drying of wet gelled composites leads to rigid material called xerogels. The RF xerogels are red and RFur xerogels are black. Typically, xerogels are transparent at low salt concentration (below 30%). The microstructure, morphology, and some other properties of chosen composites were studied by means of HR SEM, AFM, XRD, DTA/TG, and N₂ adsorption isotherm techniques. SEM observation revealed that sizes of the oxidizer particles vary from less than 100 nm to ca. 1000 nm. XRD analyses also confirmed the presence of nanometer‐sized crystals of oxidizers in some formulations. The specific surface area of polymeric matrix/oxidizer composites was found to be in the range from 0.002 to 0.3 m² g⁻¹. After removing the salt from the composites (by extraction with boiling water), the specific surface area grows even up to 210 m² g⁻¹. TG/DTA analyses showed that the tested composites decompose as typical energetic materials. If pre‐heated and exposed to flame, some of them (especially RF/Mg(ClO₄)₂ composites) undergo violent deflagration with loud sound and flash effect.     

Nanoengineered biocomposite tricomponent polymer based matrices for bone tissue engineering

Nanoengineered biodegradable constructs based on synthetic and natural polymers enriched with hydroxyapatite (HA) nanoparticles have been found to mimic the extracellular matrix of bone tissue. The main objective of this study was to create biocomposite nanostructured scaffolds by incorporating collagen and HA nanoparticles into poly(L-lactic acid)-co-poly(?-caprolactone) by electrospinning. The fiber diameter of the composite PLCL/Col and PLCL/Col/HA fibers was smaller compared to PLCL. In vitro biocompatibility of the scaffolds studied using human fetal osteoblasts and EDX analysis showed high deposition of calcium on PLCL/Col/HA. The results shows that PLCL/Col/HA nanofibrous constructs have huge potential as substrates for bone regeneration.     

Antifungal activity of denture soft lining material modified by silver nanoparticles-a pilot study

Soft liner materials in oral cavity environments are easily colonized both by fungi and dental plaque. These factors are the cause of mucosal infections. The microorganism that most frequently colonizes soft liner materials is Candida albicans. Colonization occurs on the surface of materials and within materials. A solution to this problem might involve modification of soft liner materials with silver nanoparticles (AgNPs). In this article, we present results showing the antifungal efficacy of silicone soft lining materials modified with AgNPs. The modification process was conducted by dissolving both material components (base and catalyst) in a colloidal solution of AgNPs and evaporating the solvent. Composites with various AgNP concentrations (10, 20, 40, 80, 120 and 200 ppm) were examined. The in vitro antifungal efficacy (AFE) of composite samples was 16.3% to 52.5%.     

Investigations on electrochemical α-methoxylation of selected dipeptides

Voltamperometric studies on the indirect electrochemical α-methoxylation of Boc-Pro-Gly-OMe and Boc-Val-Gly-OMe in MeOH in the presence of NaCl or NaBr as the mediator suggested that the first reaction step was a direct N-halogenation of the dipeptide by active chlorine or bromine adsorbed on the electrode surface. The kind of mediator (NaCl or NaBr), its concentration, the current density, and the applied electric charge had a significant influence on the reaction course. In the case of Boc-Pro-Gly-OMe, the use of sodium bromide was necessary to obtain a relatively high ratio of α-monomethoxylation to α,α-dimethoxylation. For Boc-Val-Gly-OMe, the selectivity for α-monomethoxylation was close to 100%, independently of the mediator. Optimisation of the selected electrolysis parameters allowed us to significantly improve the yield and selectivity of the α-methoxylation of Boc-Pro-Gly-OMe (Kardassis et al. Tetrahedron 54:3471, 1998) and to obtain good results in the α-methoxylation of Boc-Val-Gly-OMe.     

Colour management system: Monte Carlo implementation for camouflage pattern generation

The Monte Carlo method provides a simple yet powerful and flexible tool for simulation of complex or random systems. This paper contains an overview of the theory behind the method and some simple examples to illustrate its implementation to model the refinement of patterns on the camouflaged surface. The objective is to provide an introduction to the method and to present a useful tool for solving practical problems. The first attempts of its application for military camouflage pattern generation are presented. A colour management system utilising the Monte Carlo method and based on the imaging and spectral data enabled the design of a dedicated camouflage pattern for both small‐ and large‐size military objects.     

Fly ash as a sorbent for boron removal from aqueous solutions: Equilibrium and thermodynamic studies

ABSTRACT

This study presents the application of fly ash from brown coal and biomass burning power plant as a sorbent for the removal of boron ions from an aqueous solution. The adsorption process efficiency depended on the parameters, such as adsorbent dosage, pH, temperature, agitation time and initial boron concentration. The experimental data fitted well with the Freundlich isotherm model and the maximum capacity was found to be 16.14 mg g^?1. The adsorption kinetics followed the pseudo-second-order model. Also, the intra-particle diffusion model parameters were calculated. Thermodynamic parameters such as change in free energy (ΔG°), enthalpy (ΔH°), entropy (ΔS°) revealed on exothermic nature of boron adsorption onto the fly ash.     

Effect of lanthanum-modified magnesium silicate on isotactic polypropylene crystallization in composite materials during shear flow

The activity of isotactic polypropylene (iPP) nucleating additives during shear flow of composite materials is still not entirely explained. In current work the sol-gel method was employed to synthesize MgO·SiO₂ filler, surface-modified with trivalent lanthanum. The crystallization of commercial iPP in the presence of 0.5% by weight La³⁺ modified or unmodified silicates was analyzed. The wide angle X-ray scattering analysis proved that the presence of even small amount of filler influences significantly on supermolecular structure of iPP. The results of microscope observations confirmed that the lanthanum-modified filler shows the nucleating ability for iPP. In that case a significant reduction of crystallization induction time was noticed. The investigation of iPP crystallization in composites after shear treatment confirmed that the increase of shear rate reduces the nucleating ability of additives. Moreover, the flow of filler particles during shearing may impede the shear-induced crystallization phenomenon.