Hydrodechlorination of CCl<Subscript>4</Subscript> on Pt–Au/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of Pt/Al₂O₃ catalysts were prepared by the impregnation method and were characterized by TEM, XRD, H₂ and CO chemisorptions, and investigated in the hydrodechlorination of tetrachloromethane. Three Pt-rich, Pt–Au/Al₂O₃ catalysts (Pt₁₀₀, Pt₉₅Au₅ and Pt₉₀Au₁₀) showed a similar metal particle size (~2.5–2.7 nm), so observed changes in the catalytic behavior are ascribed to alloying effect, especially because a considerable degree of Pt–Au mixing was achieved in the bimetallic samples. It appeared that by introducing very small amount of gold (10 at.%) to platinum, the catalytic activity is increased. It is argued that the occurrence of this moderate synergistic effect is associated with a decreased tendency of surface chloriding when platinum is alloyed with gold. Zbigniew Kowalczyk—deceased.     

Physico-Chemical Properties of Cobalt–Ruthenium (10% Co–0.5% Ru) Catalysts Supported on Binary Oxides 8.5%ZrO<Subscript>2</Subscript>/Support (SiO<Subscript>2</Subscript>, Al<Subscript>2</Subscript>O<Subscript>3</Subscript>, TiO<Subscript>2</Subscript>) for Fischer-Tropsch Synthesis

The promotion of Fischer-Tropsch catalysts 10%Co/Al₂O₃, 10%Co/SiO₂, 10%Co/TiO₂ by 0.5% Ru and the modification of supports by 8.5 wt% ZrO₂ have been studied. The following properties: catalyst specific surface area as well as reducibility and dispersion of metallic phase were studied by different techniques: BET, TPR, and H₂ chemisorption. The modification of supports by non-reducible ZrO₂, results in a decrease of cobalt oxide reduction on Al₂O₃ and TiO₂ but not on SiO₂ supports. Additionally the enhancement of cobalt dispersion was found for all catalysts with ZrO₂ modified supports. The impact of Ru promotion is likely due to the stabilization of applied supports, prevention or blockage of interaction between surface Co species and support and an increase in cobalt oxide reducibility to the catalytically active metallic cobalt phase.     

Bimetallic Au–Cu, Ag–Cu/CrAl3O6 Catalysts for Methanol Synthesis

The influence of silver and gold addition on the activity and physicochemical properties of supported Cu/CrAl₃O₆ catalysts was the aim of this work. The reduction of CrAl₃O₆ support shows only one reduction stage attributed to Cr (VI) species reduction originating from previously oxidized binary oxide. Supported copper catalysts reduce in one or two stages depending on copper concentration representing the reduction of copper oxide—CuO, copper oxide chemically combined with Cr(III) oxide as copper chromite—CuCr₂O₄ and Cr(VI) species originating from surface chromate ions CrO₄ ^2?. Additionally, the introduction of silver into supported copper catalysts Cu/CrAl₃O₆ can led to the appearance of silver chromate phase. XRD investigations of support CrAl₃O₆ alone, supported copper and gold and silver promoted copper supported catalysts calcined at 400, 700 and 900 °C indicated the presence of highly amorphous alumina γ-Al₂O₃ like structure network in which some of cationic locations of aluminum were occupied by chromium atoms and small quantities of α-Cr₂O₃ phase. Additionally, for copper, silver–copper, and gold–copper supported catalysts the following oxide phases were distinguished: monometallic oxides CuO, Ag₂O, binary oxides CuAl₂O₄, Ag₂CrO₄, CuCr₂O₄ and even ternary oxide CuAlCrO₄. In the case of gold promoted copper supported catalysts metallic gold phase was detected. Activity tests carried out for these catalysts show that the most active was 20 wt.% Cu/CrAl₃O₆ catalyst. Promotion of copper catalysts by silver improves the activity in methanol synthesis, what can be assigned to silver chromate formation. The analogical gold chromate like formation was not confirmed.     

Structural identification of highly polar nontarget contaminants in drinking water by ESI-FAIMS-Q-TOF-MS

Drinking water is a complex mixture that contains thousands of naturally occurring and anthropogenic contaminants. Liquid chromatography-mass spectrometry (LC-MS) methods have gained a tremendous popularity in monitoring nonvolatile, highly polar, and thermally labile components in drinking water. It is well recognized, however, that there are difficulties or limitations of LC-MS methods associated with (1) significant resources (time and effort) involved in sample preparation (preconcentration, fractionation, separation), (2) low screening capacity for target contaminants, and (3) insufficient capabilities for structural identification (elucidation) of nontarget contaminants. Consequently, LC-MS methods are mainly used for the detection of target contaminants (compounds identified in drinking water before), seldom for the structural identification of abundant nontarget pollutants (unidentified pollutants in drinking water), and almost never for the structural identification of nontarget components at a trace level. The paper presents a new method of electrospray ionization high field asymmetric waveform ion mobility spectrometry mass spectrometry (ESI-FAIMS-MS), which can detect a large number of water pollutants in a quick and convenient fashion without preconcentration, fractionation, derivatization, or column separation. Most importantly, the method provides structural identification of nontarget contaminants including species present in drinking water at a sub-parts-per-billion concentration level. The identification of previously unknown contaminants was based on mass measurements of investigated ions and their fragments in mass and tandem mass spectrometry. Elemental compositions of these ions, determined by mass measurements, were used to link dissociation patterns of investigated species with their chemical structures. Characterization of nontarget contaminants of chlorine-treated drinking water by ESI-FAIMS-MS has revealed many previously unknown disinfection byproducts. The most intriguing compound, from a group of highly polar hydroxycarboxylic acids discovered in the study, was the most abundant component of drinking water, glycolic acid. Glycolic acid (toxic to kidneys and associated with a moderate maternal toxicity) has never been considered as a drinking water contaminant, despite the fact that it is present in drinking water at a higher concentration (high ppm) than concentrations of highly polar water pollutants that had attracted most attention in the past. The process of structural elucidation of discovered pollutants, including ultratrace contaminants representing a variety of carboxylic acids, will be presented in detail. The structural identification of highly polar contaminants in drinking water presented in the paper is rarely reported in the literature. The key experimental feature of the ESI-FAIMS-MS method is FAIMS separation, which significantly improves the identification capabilities of mass spectrometry.     

Anti-Inflammatory Effect of Very High Dose Local Vessel Wall Statin Administration: Poly(L,L-Lactide) Biodegradable Microspheres with Simvastatin for Drug Delivery System (DDS)

Atherosclerosis involves an ongoing inflammatory response of the vascular endothelium and vessel wall of the aorta and vein. The pleiotropic effects of statins have been well described in many in vitro and in vivo studies, but these effects are difficult to achieve in clinical practice due to the low bioavailability of statins and their first-pass metabolism in the liver. The aim of this study was to test a vessel wall local drug delivery system (DDS) using PLA microstructures loaded with simvastatin. Wistar rats were fed high cholesterol chow as a model. The rat vessels were chemically injured by repeated injections of perivascular paclitaxel and 5-fluorouracil. The vessels were then cultured and treated by the injection of several concentrations of poly(L,L-lactide) microparticles loaded with the high local HMG-CoA inhibitor simvastatin (0.58 mg/kg) concentration (SVPLA). Histopathological examinations of the harvested vessels and vital organs after 24 h, 7 days and 4 weeks were performed. Microcirculation in mice as an additional test was performed to demonstrate the safety of this approach. A single dose of SVPLA microspheres with an average diameter of 6.4 μm and a drug concentration equal to 8.1% of particles limited the inflammatory reaction of the endothelium and vessel wall and had no influence on microcirculation in vivo or in vitro. A potent pleiotropic (anti-inflammatory) effect of simvastatin after local SVPLA administration was observed. Moreover, significant concentrations of free simvastatin were observed in the vessel wall (compared to the maximum serum level). In addition, it appeared that simvastatin, once locally administered as SVPLA particles, exerted potent pleiotropic effects on chemically injured vessels and presented anti-inflammatory action. Presumably, this effect was due to the high local concentrations of simvastatin. No local or systemic side effects were observed. This approach could be useful for local simvastatin DDSs when high, local drug concentrations are difficult to obtain, or systemic side effects are present.     

Antimicrobial Gallium‐Doped Phosphate‐Based Glasses

Novel quaternary gallium‐doped phosphate‐based glasses (1, 3, and 5 mol % Ga₂O₃) were synthesized using a conventional melt quenching technique. The bactericidal activities of the glasses were tested against both Gram‐negative (Escherichia coli and Pseudomonas aeruginosa) and Gram‐positive (Staphylococcus aureus, methicillin‐resistant Staphylococcus aureus, and Clostridium difficile) bacteria. Results of the solubility and ion release studies showed that these glass systems are unique for controlled delivery of Ga³⁺. ⁷¹Ga NMR measurements showed that the gallium is mostly octahedrally coordinated by oxygen atoms, whilst FTIR spectroscopy provided evidence for the presence of a small proportion of tetrahedral gallium in the samples with the highest gallium content. FTIR and Raman spectra also afford an insight into the correlation between the structure and the observed dissolution behavior via an understanding of the atomic‐scale network bonding characteristics. The results confirmed that the net bactericidal effect was due to Ga³⁺, and a concentration as low as 1 mol % Ga₂O₃ was sufficient to mount a potent antibacterial effect. The dearth of new antibiotics in development makes Ga³⁺ a potentially promising new therapeutic agent for pathogenic bacteria including MRSA and C. difficile.     

Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

Resveratrol Affects Insulin Signaling in Type 2 Diabetic Goto-Kakizaki Rats

Resveratrol is a biologically active diphenolic compound exerting multiple beneficial effects in the organism, including anti-diabetic properties. This action is, however, not fully elucidated. In the present study, we examined effects of resveratrol on some parameters related to insulin signaling, and also on diabetes-associated dysregulation in Goto-Kakizaki (GK) rats with congenital type 2 diabetes. Resveratrol was given at the dose of 20 mg/kg b.w. for 10 weeks. It was shown that the expression and phosphorylation levels of insulin receptor in the skeletal muscle of GK rats were significantly decreased, compared with control animals. However, these changes were totally prevented by resveratrol. Liver expression of the insulin receptor was also reduced, but in this case, resveratrol was ineffective. Resveratrol was also demonstrated to significantly influence parameters of insulin binding (dissociation constant and binding capacity) in the skeletal muscle and liver. Moreover, it was shown that the expression levels of proteins related to intracellular glucose transport (GLUT4 and TUG) in adipose tissue of GK rats were significantly decreased. However, treatment with resveratrol completely abolished these changes. Resveratrol was found to induce normalization of TUG expression in the skeletal muscle. Blood levels of insulin and GIP were elevated, whereas proinsulin and GLP-1 diminished in GK rats. However, concentrations of these hormones were not affected by resveratrol. These results indicate that resveratrol partially ameliorates diabetes-associated dysregulation in GK rats. The most relevant finding covers the normalization of the insulin receptor expression in the skeletal muscle and also GLUT4 and TUG in adipose tissue.     

Colour management system: Monte Carlo implementation for camouflage pattern generation

The Monte Carlo method provides a simple yet powerful and flexible tool for simulation of complex or random systems. This paper contains an overview of the theory behind the method and some simple examples to illustrate its implementation to model the refinement of patterns on the camouflaged surface. The objective is to provide an introduction to the method and to present a useful tool for solving practical problems. The first attempts of its application for military camouflage pattern generation are presented. A colour management system utilising the Monte Carlo method and based on the imaging and spectral data enabled the design of a dedicated camouflage pattern for both small‐ and large‐size military objects.