Glass microparticle- versus microsphere-filled experimental dental adhesives

This study aimed to formulate antibacterial dental adhesives. Phosphate-substituted methacrylate adhesives were modified with 0–20 wt % copper-doped glass microparticles. Two shapes of microparticles were used: regular shaped (microspheres) and irregular shaped (microparticles). The morphology/composition, roughness, monomer conversion (DC%), thermogravimetric analysis, and antibacterial action against S. mutans and P. aeruginosa and ion release were investigated. The results showed that microspheres produced adhesives with a relatively smoother surface than microparticles did. The DC% of adhesives increased with increasing glass filler content. Filled adhesives showed polymer decomposition at ~315 °C and glass melting at 600–1000 °C. The weight loss percent of adhesives decreased with increasing weight percent of fillers. Glass microparticles at 0–20 wt % significantly increased the antibacterial action of adhesives against both bacteria. Glass microspheres at 0–5 wt % significantly increased the antibacterial action of adhesives against both bacteria. Only 20 wt % microparticle-filled adhesive showed an inhibition zone similar to tobramycin (positive control). Microparticle-filled adhesives (with >5 wt % filler) significantly reduced S. mutans more than their microsphere counterparts. Microsphere-filled adhesives (with ≤5 wt % filler) significantly reduced P. aeruginosa more than their microparticle counterparts. Microsphere-filled adhesives showed higher Cu release than their microparticle counterparts. Accordingly, phosphate-substituted methacrylate filled with glass could be used as an antibacterial adhesive. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47832.     

A non-local fractional stress–strain gradient theory

International Journal of Mechanics and Materials in Design - A generalized non-local stress–strain gradient theory is presented using fractional calculus. The proposed theory includes as a...     

Nanomotion Detection Method for Testing Antibiotic Resistance and Susceptibility of Slow‐Growing Bacteria

Infectious diseases are caused by pathogenic microorganisms and are often severe. Time to fully characterize an infectious agent after sampling and to find the right antibiotic and dose are important factors in the overall success of a patient's treatment. Previous results suggest that a nanomotion detection method could be a convenient tool for reducing antibiotic sensitivity characterization time to several hours. Here, the application of the method for slow‐growing bacteria is demonstrated, taking Bordetella pertussis strains as a model. A low‐cost nanomotion device is able to characterize B. pertussis sensitivity against specific antibiotics within several hours, instead of days, as it is still the case with conventional growth‐based techniques. It can discriminate between resistant and susceptible B. pertussis strains, based on the changes of the sensor's signal before and after the antibiotic addition. Furthermore, minimum inhibitory and bactericidal concentrations of clinically applied antibiotics are compared using both techniques and the suggested similarity is discussed.     

Analysis of the effect of structural defects on the fatigue strength of RFSSW joints using C‐scan scanning acoustic microscopy and SEM

Solid‐state refill friction stir spot welding (RFSSW) technology offers significant benefits in the fabrication of aluminium structures in the transport and aerospace industries. In this paper, the joining of 1.6‐mm‐thick Alclad 7075‐T6 aluminium alloy sheets is investigated. High‐cycle fatigue strength tests of single‐lap welded joints were carried out on an Instron E10000 testing machine with a limited number of cycles equal to 2 × 10⁶. The welding of overlap fatigue specimens was conducted using an RPS100 spot welder by Harms & Wende GmbH & Co KG. C‐mode scanning acoustic microscopy (C‐SAM) and scanning electron microscopy (SEM) were utilised to evaluate the joint quality and characterise the microstructure. The paper discusses the effect of the maximum load force and defects (voids, hook, kissing bond, bonding ligament, etc) associated with the material flow in the weld on the failure mechanism. Insufficient plasticisation of sheet material and mixing of the material in the weld area are crucial defects that influence the number of destructive cycles. The weld defects in the joint structure are a source of a decrease in the fatigue life compared with the fatigue life of defect‐free welds. It was also found that RFSSW joint defects can be effectively detected by the nondestructive C‐SAM method.     

Design and characteristics of gellan gum beads for modified release of meloxicam

The aim of the presented work was to design, formulate and evaluate the properties of low-acyl gellan macro beads with the potential application as carriers for oral delivery of meloxicam (MLX) in the prophylaxis of colorectal cancer. The beads were obtained by means of ionotropic gelation technique. Calcium chloride (1.0%, 9.0?×?10^?2 M) was used as the cross-linking agent. Nine different polymer, drug and surfactant (Tween^®80) mixtures were used for production of the beads. The quantitative compositions of the mixtures were generated with the application of the Design of Experiments (DoE) modulus from the STATISTICA Software. The prepared formulations revealed 7.2–27.0% of drug loading and 29.2–50.7% drug encapsulation efficiency. It turned out that 0.5% amount of gellan gum in the mixtures was not sufficient to obtain spherical beads. The morphology and surface of the dried beads were analyzed by SEM. Raman spectra confirmed that MLX did not undergo structural changes during production of the beads. The swelling behavior and degradation of the beads were evaluated in three simulated gastrointestinal fluids at different pH (1.2; 4.5; 6.8). The MLX in vitro release studies were conducted on USP apparatus IV, working in the open loop mode. The obtained results showed that MLX release from the dried beads was pH-dependent. The formulations obtained from mixtures containing 1.0 and 1.5% of gellan may be considered as oral dosage forms for MLX, intended to omit the stomach and release the drug in the distal parts of the gastrointestinal tract.     

Chemical Locking in Molecular Tunneling Junctions Enables Nonvolatile Memory with Large On–Off Ratios

This paper describes the reversible chemical locking of sypiropyran switches bound to metallic surfaces to enable the encoding of nonvolatile information. Data are encoded spatially by selectively locking the spiropyran moieties in their merocyanine form using a combination of exposure to acid and UV light. Without exposure to acid, the merocyanine form spontaneously converts back to the spiropyran form. Bits are resolved by defining the regions of the monolayer that are exposed to acid, using a “soft punchcard” fabricated from a silicone elastomer. Information is read by measuring the tunneling charge–transport through the monolayer using eutectic Ga–In top‐contacts. The merocyanine form is more than three orders of magnitude more conductive than the spiropyran form, allowing the differentiation of bits. Photoelectron spectroscopy shows that the monolayers are undamaged by exposure to light, acid, base, and applied bias, enabling proof‐of‐concept devices in which an 8‐bit ASCII encoded six‐character string is written, erased, and rewritten.     

Preparation and enhanced mechanical properties of hydroxyapatite hybrid hydrogels via novel photocatalytic polymerization

Hydroxyapatite (HA) hybridized poly(N-isopropylacrylamide)-co-acrylic acid (PNIPAM-co-AAc) hydrogel on thermoplastic polyurethane (TPU) were successfully prepared via photocatalytic polymerization technique. Low temperature plasma processing of HMDSZ and O₂ plasma were deposition on substrate. The HA/hydrogel were stabilized by HA of which the wettability was modified by calcium nitrate and ammonium phosphate dibasic. The HA gradually increases with the increase of time cycles. The deposition of organic silicone group by the HMDSZ on the TPU substrate is hydrophobic surface. When deposition of O₂, the water contact angles (WCA) was changed to <10° and surface hydrophilicity. The materials were characterized by OM, SEM, FT-IR, XPS and XRD. The results showed that the NIPAM: AAc (1:1 mol) polymers possess macropores ranging from 2 to 20 μm, and their large numbers of carboxyl groups and hydroxyl groups result in a favorable adsorption capacity for HA. Swelling studies indicated that NIPAM: AAc (1:1 mol) was 446 ± 0.3%. This work provided a promising alternative method for the fabrication of polymer materials with tunable and interconnected pores structures for the HA.     

Phase transition in space: how far does a symmetry bend before it breaks?

We extend the theory of symmetry-breaking dynamics in non-equilibrium second-order phase transitions known as the Kibble-Zurek mechanism (KZM) to transitions where the change of phase occurs not in time but in space. This can be due to a time-independent spatial variation of a field that imposes a phase with one symmetry to the left of where it attains critical value, while allowing spontaneous symmetry breaking to the right of that critical borderline. Topological defects need not form in such a situation. We show, however, that the size, in space, of the 'scar' over which the order parameter adjusts as it 'bends' interpolating between the phases with different symmetries follows from a KZM-like approach. As we illustrate on the example of a transverse quantum Ising model, in quantum phase transitions this spatial scale--the size of the scar--is directly reflected in the energy spectrum of the system: in particular, it determines the size of the energy gap.     

Zn(1-x)MnxTe diluted magnetic semiconductor nanowires grown by molecular beam epitaxy

It is shown that the growth of II-VI diluted magnetic semiconductor nanowires is possible by the catalytically enhanced molecular beam epitaxy (MBE). Zn(1-x)MnxTe NWs with manganese content up to x=0.60 were produced by this method. X-ray diffraction, Raman spectroscopy, and temperature dependent photoluminescence measurements confirm the incorporation of Mn(2+) ions in the cation substitutional sites of the ZnTe matrix of the NWs.     

RAPD with microsatellite as a tool for differentiation of Candida genus yeasts isolated in brewing

Fifteen wild yeast strains were isolated in two factories of a lager brewing company in Poland. Their identification with API 32C system showed mainly the presence of Candida sake species (7/15). To differentiate the isolates, randomly amplified polymorphic DNA (RAPD) with (GTG)(5), (GAC)(5), (GACA)(4) microsatellite primers and M13 core sequence (5'-GAG GGT GGC GGT TCT-3') were chosen. The results of patterns similarity are presented as dendrograms for each RAPD analysis and for overall patterns. On the overall patterns, all isolates identified as C. sake, except Strain No. 1, were regrouped in one cluster. Collection strain C. sake CBS 617 was similar in 46% to the cluster with six isolates (Strain Nos. 3, 6, 8, 11, 13, 14). The second reference strain C. sake CBS 159 and the Strain No. 1 were regrouped with other Candida species (collection strains) showing, respectively, only 20% and 42% of similarity to other C. sake strains. The similarity based on the overall dendrogram between isolate Nos. 3, 6, 8, 11, 13, 14 and C. sake CBS 617 was 49%. Between those strains and other Candida, the similarity was only 37%.