Hybridization of acoustic waves in piezoelectric plates

The conditions for hybridization of the zero-order and high-order acoustic waves propagating in a piezoelectric crystal plate have been studied. The dependence of the phase velocity of the hybrid waves on the parameter hf (h is the plate thickness and f is the wave frequency) is established for the potassium niobate and lithium niobate plates possessing various crystallographic orientations and conductivities. It is found that hybridization takes place when the conductivity of a thin surface layer exceeds a certain critical value, which can vary within broad limits depending on the plate material and orientation. The degree of dispersive repulsion of the coupled modes grows with increasing electromechanical coupling coefficient.     

Family-Responsive Interventions, Perceived Organizational and Supervisor Support, Work-Family Conflict, and Psychological Strain.

This study examined organizational family-responsive policies, perceptions of the organization as family supportive, and supervisor support as issues that may be salient to the experience of conflict between paid employment (work) and family roles. Data were collected from 355 managerial personnel in New Zealand. Although work-family conflict and psychological strain were strongly linked, the availability of organizational policies had no significant association with levels of conflict or strain, whereas policy usage was related only to work-to-family interference and not to family-to-work interference. On the other hand, perceptions of the organization as family supportive and supervisor support for work-family balance displayed significant relationships with key variables, highlighting the importance of these variables for interventions designed to ameliorate the negative impact of work-family conflict on managerial well-being. Implications for the effective implementation of family-responsive interventions are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

How Meta-Analysis Increases Statistical Power.

One of the most frequently cited reasons for conducting a meta-analysis is the increase in statistical power that it affords a reviewer. This article demonstrates that fixed-effects meta-analysis increases statistical power by reducing the standard error of the weighted average effect size (T?.) and, in so doing, shrinks the confidence interval around T?.. Small confidence intervals make it more likely for reviewers to detect nonzero population effects, thereby increasing statistical power. Smaller confidence intervals also represent increased precision of the estimated population effect size. Computational examples are provided for 3 effect-size indices: d (standardized mean difference), Pearson's r, and odds ratios. Random-effects meta-analyses also may show increased statistical power and a smaller standard error of the weighted average effect size. However, the authors demonstrate that increasing the number of studies in a random-effects meta-analysis does not always increase statistical power. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Elastic constants of face-centered cubic and L1<Subscript>2</Subscript> Ni-Si alloys: Composition and temperature dependence

The adiabatic elastic stiffness constants C _ij of Ni-Si single-crystal solid-solution alloys of two slightly different compositions, 10.78 and 11.17 at. pct Si, were measured over the temperature range from 20 °C to 900 °C using the rectangular parallelepiped resonance method. The isotropic elastic constants of the polycrystalline ordered intermetallic compound Ni₃Si containing 23 at. pct Si were also measured over this temperature range. Values of the C _ij for Ni₃Si were estimated from the data on the polycrystalline alloy, as well as from published data in the literature on isomorphous ternary ordered intermetallic compounds containing different amounts of Si. Using measured values and previously published data, the stiffness constants of Ni₃Ti were estimated; these are the only available data on this alloy. The estimated single-crystal elastic constants of Ni₃Si, as well as the experimentally measured bulk modulus, are considerably smaller than published values calculated from first-principles methods. The same is true for the C _ij of Ni₃Ti, but the discrepancies are smaller.     

Work-hardening and recovery mechanisms in gamma-based titanium aluminides

The work-hardening mechanisms in two-phase γ-titanium aluminide alloys were characterized in terms of the glide obstacles determining the velocity and slip path of dislocations, utilizing transmission electron microscopy (TEM) observations and thermodynamic-glide parameters. There was clear evidence that short-range obstacles in the form of dislocation debris and dipoles were produced during plastic deformation at room temperature. These dislocation obstacles contributed significantly to work hardening. The observed strong strain hardening arose from long-range elastic dislocation interactions and the production of dipole and debris defects. The thermal stability of these deformation-induced defects was assessed by isothermal and isochronal annealing. The results indicated that the dipole and debris defects were relatively unstable upon annealing at moderately high temperatures, which led to significant recovery of work hardening. This article is based on a presentation made in the symposium entitled “Fundamentals of Structural Intermetallics,” presented at the 2002 TMS Annual Meeting, February 21–27, 2002, in Seattle, Washington, under the auspices of the ASM and TMS Joint Committee on Mechanical Behavior of Materials.     

Behaviour of ±45° glass/epoxy filament wound composite tubes under quasi-static equal biaxial tension–compression loading: experimental results

The primary aim of this paper is to present results describing in detail the behaviour of ±45° E-glass/MY750 (GRP) tubes, of various wall thicknesses, subjected to equal biaxial tension–compression loading, generated under combined internal pressure and axial compression. The role played by the non-linear lamina shear has also been assessed by comparing various shear stress–strain curves for embedded laminae (extracted from tests on ±45° tubes subjected to circumferential: axial stress ratios SR=1:0, 1:−1 and 2.3:−1) with that of an ‘isolated’ lamina (measured from torsion of 90° tubes). Extracted shear failure strains, for embedded laminae, were more than four fold larger than those measured at ultimate failure for an ‘isolated’ lamina. Soft characteristics were observed in the embedded lamina and these were believed to be due to interaction between early matrix damage initiation (and propagation) and shear. Factors affecting the behaviour of the tubes, such as bulging, scissoring, thermal stresses and stress variation through the thickness are discussed.     

An alcohol expectancy-challenge prevention program for at risk college women.

Alcohol expectancy-challenge programs are effective in changing expectancies and reducing drinking in college men (J. Darker & M. S. Goldman. 1993. 1998); however, recent evidence suggests this protocol might not be effective for women (M. E. Dunn, C. Lau, & I. Y. Cruz, 2000). This study was designed to reevaluate the effectiveness of a social/sexual expectancy-challenge intervention in college women reporting moderate to heavy alcohol use. Forty-six undergraduate women were randomly assigned to the prevention or control condition. Participants reported alcohol expectancies at pre- and posttest and monitored their drinking patterns daily for 6 weeks. The program was effective in changing some expectancies but did not reduce drinking. This further confirms differences in the mechanisms by which expectancy-challenge programs function for men and women. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Compositions of Co – Cr – Mo Alloys Examined by Glow-Discharge Mass Spectrometry

A method has been developed for the quantitative elemental analysis of Co – Cr – Mo alloys which are used for making surgical implants, and which is done by glow-discharge mass spectrometry. There is a discussion of the effects of molecular ions and an estimate is made of the sensitivity limits in the detection of traces of toxic elements. A method has been devised for calculating the concentrations of molecular ions that increases the analysis reliability. It is shown that raising the argon pressure and discharge current substantially reduces the relative concentrations of molecular ions and allows one to raise the analysis sensitivity.     

Turning software into a service

The software as a service model composes services dynamically, as needed, by binding several lower-level services-thus overcoming many limitations that constrain traditional software use, deployment, and evolution.     

Allocation of Scarce Water Resources Using Deficit Irrigation in Rotational Systems

On irrigation schemes with rotational irrigation systems in semiarid tropics, the existing rules for water allocation are based on applying a fixed depth of water with every irrigation irrespective of the crops, their growth stages, and soils on which these crops are grown. However, when water resources are scarce, it is necessary to allocate water optimally to different crops grown in the irrigation scheme taking account of different soils in the command area. Allocating water optimally may lead to applying less water to crops than is needed to obtain the maximum yield. In this paper, a three stage approach is proposed for allocating water from a reservoir optimally based on a deficit irrigation approach, using a simulation-optimization model. The allocation results with a deficit irrigation approach are compared for a single crop (wheat) in an irrigation scheme in India, first with full irrigation (irrigation to fill the root zone to field capacity) and second with the existing rule. The full irrigation with a small irrigation interval was equivalent to adequate irrigation (no stress to the crop). It is found that practicing deficit irrigation enables the irrigated area and the total crop production in the irrigation scheme used for the case study to be increased by about 30–45% and 20–40%, respectively, over the existing rule and by 50 and 45%, respectively, over the adequate irrigation. Allocation of resources also varied with soil types.