Engineering plastics from lignin. XV. Polyurethane films from chain-extended hydroxypropyl lignin

A series of polyurethane (PU) films was prepared from chain-extended hydroxypropyl lignins (CEHPL). In appearance, these films ranged from brittle and dark brown to rubbery and bronze. The thermal, mechanical, and network properties of these PUs were investigated by DMTA and DSC analysis. All films exhibited single T_g's which varied between ?53° and 101°C, depending on lignin content. From swelling experiments, molecular weight between crosslinks (M _c) was determined and found to vary over 2.5 orders of magnitude. The M _c's were related to the change in T_g that accompanied network formation. Stress–strain experiments showed a variation in Young's modulus between 7 and 1300 MPa. Most of the variation in material properties was related to lignin content and to a lesser extent to diisocyanate type, hexamethylene diisocyanate, or toluene diisocyanate. The source of the CEHPL had no effect on the observed properties. From these results it was concluded that the properties of PUs can be controlled and engineered for a wide variety of practical uses.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

Tailoring of Surfaces with Ultrathin Layers for Controlled Binding of Biopolymers and Adhesion and Guidance of Cells

Various strategies are described for the bio-functionalization of solid substrates by design of interfacial architectures. The first approach is based on the self-assembly process of long-chain thiol molecules from solution to a (noble) metal surface. If some of these building blocks carry a binding site (ligand) for proteins (receptors, antibodies, etc.) the metal surface can be tailored for maximum specific binding while simultaneously minimizing nonspecific adsorption. The second concept is based on polymers that are covalently attached to (oxide) surfaces. The preparation of these (end-) grafted functional polymers involves either the binding of preformed macromolecules to corresponding sites at the surface of the support or the recently introduced “grafting-from” method, by which an initiator molecule is first covalently bound to the surface and then activated — either by heat or light — in the presence of suitable monomer units such that a polymer chain grows from the solid/solution interface. Finally, the functionalization of patterned surfaces by peptide chains that mimic the binding domains of cell adhesion proteins is summarized. It is demonstrated that not only the selective adhesion of neuronal cells can then be controlled, but also their development with the outgrowth of dendrites and axons.     

The Kinetics of the Thermal Decomposition of Thermoplastic Polyurethane Elastomers under Thermoplastic Processing Conditions

A theoretical approach to the kinetics of the thermal decomposition of molten thermoplastic polyurethane elastomers, under conditions of thermoplastic processing, is described. On the basis of these considerations, the thermal decomposition in different instruments (melt index analyser and measuring extruder) can be described quantitatively and the various results can be compared. As a result, identical conditions of decomposition of the melt can be defined accurately, thus opening up the possibility of combining experimental values from different instruments. The fundamental kinetic equation obtained for the kinetics of the thermal decomposition of thermoplastic polyurethanes describes the decomposition reaction and the reverse reaction (formation reaction) – which is dependent on the system of measurement and processing – as a function of the molar mass (end‐group concentration) of the original product, determined from the velocity constants for the decomposition reaction and back reaction. The consideration of the limiting value for t → ∞ is in agreement with the equilibrium constant. Consequently, the development of physical characteristic functions of thermoplastic polyurethane elastomers – independent of the system of measurement – is possible.

Experimental values and calculated curves for the thermal decomposition of PUR‐Et in a melt index analyser.     

Engineering plastics from lignin. VI. Structure–property relationships of PEG-containing polyurethane networks

Hydroxypropyl lignin-based thermosetting polyurethanes were synthesized with excess hexamethylene diisocyanate (HDI) and tolylene diisocyanate (TDI) by solution casting. Four polyethylene glycols (PEG) of molecular weight 400, 600, 1000, and 4000 were mixed with lignin polyol to incorporate different proportions of soft segment into the network prior to crosslinking. Neither thermal nor mechanical and limited small angle x-ray scattering (SAXS) analysis provided distinct evidence for phase separation and microstructure formation. The study examines the effect of the soft segment in relation to chain length and weight contribution on the thermal and mechanical properties of the final networks. A significant sensitivity of glass transition temperature (T_g), of swelling in DMF, and of the mechanical properties to soft segment content was observed. Some of this sensitivity must, however, be attributed to differences in crosslink density since the polyol to diisocyanate weight ratio was kept constant throughout the synthesis series. The magnitude of the change of the different properties was found to be influenced by both glycol content and glycol molecular weight. The T_g of the network decreased from 105°C to as low as 38°C (HDI), and from 158°C to 70°C (TDI), with incorporation of up to 17.8% glycol, and it was greater with lower molecular weight glycols than with higher ones at any weight fraction. Swelling in DMF increased as expected with soft segment content. Mechanical properties were affected most if HDI and lower molecular weight glycols were used. The uniformity in structure, reduction in brittleness, and considerable improvement in mechanical properties with inclusion of minor PEG contents indicates that lignin-based network polyurethanes can be synthesized with controllable performance characteristics.     

Structural control in radical polymerization with 1,1 diphenylethylene: 2. Behavior of MMA-DPE copolymer in radical polymerization

Copolymers of 1,1-diphenylethylene (DPE) behave in a very special way in radical polymerization. Particularly, the behavior of MMA-DPE copolymers in radical polymerization is investigated. The results reveal that the semiquinoid structure of the precursor polymer identified in a previous contribution is activated by the attack of free radicals and thus, in a second stage polymerization with a second monomer, block copolymers are formed. The block copolymer yield depends strongly on the ratio between the amount of DPE-containing precursor polymer and the initiator and monomer concentration used in the second stage. The mechanism proposed is able to explain at least qualitatively all experimental results including the restriction of this mode of control of radical polymerization to the formation of diblock copolymers only.     

Lyso platelet activating factor (LysoPAF) and its enantiomer. Total synthesis and carbon-13 NMR spectroscopy

Described is a reaction sequence for the total synthesis of lyso platelet activating factor (lysoPAF; 1-O-alkyl-sn-glycero-3-phosphocholine) and its enantiomer. The procedure is versatile and yields optically pure isomers of defined chain length. The synthesis is equally suited for the preparation of lysoPAF analogues and its enantiomers with unsaturation in the long aliphatic chain. First,rac-1(3)-O-alkylglycerol is prepared by alkylation ofrac-isopropylideneglycerol with alkyl methanesulfonate followed by acid-catalyzed removal of the ketal group. The primary hydroxy group of alkylglycerol is then protected by tritylation, the secondary hydroxy group is acylated, and the protective trityl group is removed under mild acidic conditions with boric acid on silicic acid, essentially without acyl migration. Condensation of the diradylglycerol with bromoethyl dichlorophosphate in diethyl ether, hydrolysis of the resulting chloride, and nucleophilic displacement of the bromine with trimethylamine givesrac-1-O-alkyl-2-acylglycero-3-phosphocholine in good overall yield. The racemic alkylacylglycerophosphocholine is finally treated with snake venom phospholipase A₂ (Ophiophagus hannah) which affords 1-O-alkyl-sn-glycero-3-phosphocholine (lysoPAF) of natural configuration in optically pure form. The “unnatural” 3-O-alkyl-2-O-acyl-sn-glycerol-1-phosphocholine enantiomer, which is not susceptible to phospholipase A₂ cleavage, gives 3-O-alkyl-sn-glycero-1-phosphocholine upon deacylation with methanolic sodium hydroxide. Homogeneity and structure of the intermediates and final products were ascertained by carbon-13 nuclear magnetic resonance spectroscopy on monomeric solutions.