New queueing strategies employing service interval-based priority for real-time communications in atm networks

In this paper, we propose queueing strategies employing the service interval-based priority (sip) which can provide delay-bounded, and loss-free services, while maximizing bandwidth utilization in the atm network. We also describe a variation of the sip, the residual service interval-based priority (rsip) which can achieve almost full utilization by assigning priorities dynamically on the basis of the residual service interval. We store the realtime cells belonging to different connections in logically separated queues, and for each queue, we set a parameter called service interval, during which only one cell is allowed to be transmitted. The sip server takes and transmits the head-of-line (hol) cell of the queue which has the smallest service interval, while the rsip server selects the queue with the smallest residual service interval. When there is no eligible real-time cell, it transmits non-real-time cell, thus enabling a maximized bandwidth utilization. Employing the above queueing strategies, we analyze the delay characteristics deterministically with the leaky bucket bounded input traffic and then dimension the optimal service interval. In dimensioning the service interval and buffer space of each real-time service queue, we consider burstiness of traffic in conjunction with delay constraints, so that bandwidth utilization can get maximized. In addition, we consider the issues of protection from malicious users, average bandwidth utilization, and coupling between the delay bound and the bandwidth allocation granularity.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

Multiresolution segmentation of respiratory electromyographicsignals

Analysis of respiratory electromyographic (EMG) signals in the study of respiratory control requires the detection of burst activity from background (signal segmentation), and focuses upon the determination of onset and cessation points of the burst activity (boundary estimation). The authors describe a new automated multiresolution technique for signal segmentation and boundary estimation. During signal segmentation, a new transitional segment is defined which contains the boundary between background a burst activity. Boundary estimation is then performed within this transitional segment. Boundary candidates are selected and a probability is attributed to each candidate, using an artificial neural network. The final boundary for a given transitional segment is the boundary estimate with the maximum a posteriori probability. This new method has proved accurate when compared to boundaries chosen by two investigators     

Strength,toughness and R-curve behaviour of SiC whisker-reinforced composite Si3N4 with reference to monolithic Si3N4

The flexural strength and fracture toughness of 30 vol% SiC whisker-reinforced Si₃N₄ material were determined as a function of temperature from 25 to 1400°C in an air environment. It was found that both strength and toughness of the composite material were almost the same as those of the monolithic counterpart. The room-temperature strength was retained up to 1100°C; however, appreciable strength degradation started at 1200°C and reached a maximum at 1400°C due to stable crack growth. In contrast, the fracture toughness of the two materials was independent of temperature with an average value of 5.66 MPam^1/2. It was also observed that the composite material exhibited no rising R-curve behaviour at room temperature, as was the case for the monolithic material. These results indicate that SiC whisker addition to the Si₃N₄ matrix did not provide any favourable effects on strength, toughness and R-curve behaviour.     

Non-linear properties of polymer cellular materials with a negative Poisson's ratio

Negative Poisson's ratio polymeric cellular solids (re-entrant foams) were studied to ascertain the optimal processing procedures which give rise to the smallest value of Poisson's ratio. The non-linear stress-strain relationship was determined for both conventional and re-entrant foams; it depended upon the permanent volumetric compression achieved during the processing procedure. Poisson's ratio of re-entrant foam measured as a function of strain was found to have a relative minimum at small strains. The toughness of re-entrant foam increased with permanent volumetric compression, and hence with density.     

Control of circulating current in two parallel three-phase boost rectifiers

One unique feature in parallel three-phase converters is a potential zero-sequence circulating current. To avoid the circulating current, most present technology uses an isolation approach, such as transformers or separate power supplies. This paper proposes a parallel system where individual converters connect both AC and DC sides directly without additional passive components to reduce size and cost of the overall parallel system. In this case, the control of the circulating current becomes an important objective in the converter design. This paper: (1) develops an averaged model of the parallel converters based on a phase-leg averaging technique; (2) a zero-sequence model is then developed to predict the dynamics of the zero-sequence current; (3) based on the zero-sequence model, this paper introduces a new control variable, which is associated with space-vector modulation; (4) a strong zero-sequence current control loop is designed to suppress the circulating current; and (5) simulation and experimental results validate the developed model and the proposed control scheme.     

Strategy for olive mill wastewater treatment and reuse with a sewage plant in an arid region.

This study was conducted to evaluate the treatability of OMW (olive mill wastewater) with sewage and sewage sludge, which could supplement nutrients and microbes required for OMW treatment and reduce its possible toxicity. The amount of OMW added to an aeration tank was based on the loading difference between the designed and actual COD loads, while the amount added to anaerobic digestion for energy recovery was determined by CH4 production. The COD removal efficiencies were 70-85% for both systems. Compost of OMW with dried sewage sludge also showed a similar temperature profile without OMW addition. This strongly suggested that OMW can be treated at a sewage plant without pretreatment and the treated effluent can be reused in irrigation for an arid region.     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

Casein Hydrolysate Fractions Act as Emulsifiers in Process Cheese

ABSTRACT: Degrees of hydrolysis and emulsifying activity of casein hydrolysates were the highest at 4 h hydrolysis. The oil-off values of the mixture of hydrolysate (H) or supernatant (S) and traditional emulsifier (T) were not significantly different from the control made with traditional emulsifier, except for S + T = 3:1. Two other samples made with hydrolysate or supernatant only (H or S) showed higher oil-off value than the others (p < 0.05). In flavor property, no difference was found between samples made with traditional emulsifier and those made with the mixture of hydrolysate or supernatant at the ratio of 3 to 1. Therefore, these results indicated that a mixture of the hydrolysate or supernatant and traditional emulsifier might replace a traditional emulsifier in process cheese manufacturing.