Mode I interlaminar fracture toughness of commingled carbon fibre/PEEK composites

Carbon fibre/poly (ether-ether-ketone) (PEEK) composites were fabricated from plain weave cloth using the commingled yarn of carbon fibres with PEEK filaments. The undirectional specimen was made from the warp of commingled yarn and the weft of PEEK yarn, while the two-dimensional specimen was made from commingled yarns both of the warp and the weft. During the hot-pressing process, PEEK filaments melt to form the matrix of the composite. The interlaminar fracture toughness of the commingled composite was measured and compared with that of the prepreg composite. The critical strain energy release rates,/'G _Ics, obtained for the commingled composites were higher than the prepreg composite. In particular, the two-dimensional composite exhibited higherG _Ic than the unidirectional commingled composite. Factors increasing the fracture toughness of commingled composites have also been investigated by SEM observation of the fractured surface.     

Analysis and design of synchronous permanent-magnet planar motors

The force equation of a synchronous permanent-magnet planar motor (SPMPM) was investigated. The flux density distribution of a two-dimensional (2-D) magnet array for a SPMPM was obtained by solving the equations of the scalar magnetic potential. The expressions of the force and back-EMF constant were derived and examined. Using these expressions, the conditions for normal operation of the SPMPM were found and the optimal design was determined in order to maximize the force of the SPMPM.     

A wideband monolithic RMS-DC converter using micromachineddiaphragm structures

This paper reports a monolithic rms-dc converter for measuring wideband rms signals. Two identical thermoelements for thermal rms-dc conversion are formed using planar diaphragm structures and micromachined dielectric windows. Each thermoelement consists of two polysilicon heaters and a thin-film temperature sensor located on a window and operated at constant temperature using on-chip control feedback circuitry. The thermoelements achieve a thermal efficiency greater than 7°C/mW with a thermal time constant less than 5 ms. The on-chip control circuitry is realized using a standard 3 μm p-well CMOS process with minor modifications for process compatibility with the dielectric window formation. This converter measures rms signals over a full scale range of 1 Vrms, handles crest factors in excess of 5, exhibits a typical nonlinearity of less than 1%, and achieves a 3 dB bandwidth greater than 20 MHz     

Situational influences on gender differences in agency and communion.

Gender differences were examined in the context of situational effects. Participants monitored interpersonal behavior for 20 days, using an event-sampling strategy. The monitored behaviors reflected dominance and submissiveness (components of agency) and agreeableness and quarrelsomeness (components of communion). The situations reflected differences in the status of work roles: interactions with boss, co-worker, and supervisee. Status influenced agency. Individuals were most agentic when with a supervisee and least agentic when with a boss. Gender did not influence agency but did influence communal behaviors. Women were more communal regardless of social role status; women were especially communal with other women, compared with men with men. Findings about agency supported a social role theory interpretation of gender differences. Results for communion were consistent with accounts of the influence of sex segregation on interpersonal relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of not breastfeeding on the risk of diarrheal and respiratory mortality in children under 2 years of age in Metro Cebu, The Philippines

The effects of not breastfeeding on mortality due to diarrhea and acute lower respiratory infection (ALRI) in children under 2 years of age were examined using data from a 1988-1991 longitudinal study of 9,942 children in Metro Cebu, The Philippines. Cox regression methods were used to study the magnitude of the risks, possible interactions with birth weight and nutritional status, and the effect of additional confounding factors. Not breastfeeding had a greater effect on diarrheal mortality than on ALRI mortality. In the first 6 months of life, failing to initiate breastfeeding or ceasing to breastfeed resulted in an 8- to 10-fold increase in the rate of diarrheal mortality. The rate of mortality associated with both ALRI and diarrhea was increased nearly six times by not breastfeeding, but the rate of ALRI mortality alone was not increased. The data also suggested that the risk of mortality associated with not breastfeeding was greater for low birth weight infants and infants whose mothers had little formal education. After age 6 months, the protective effects of breastfeeding dropped dramatically. These findings underscore the importance of promoting breastfeeding, especially during the first 6 months of life, and of targeting high risk groups such as low birth weight babies and those of low socioeconomic status.     

Thermomechanical fatigue—damage mechanisms and mechanism-based life prediction methods

An existing extensive database on the isothermal and thermomechanical fatigue behaviour of high-temperature titanium alloy EVII 834 and dispersoid-strengthened aluminum alloy X8019 in SiC particle-reinforced as well as unreinv conditions was used to evaluate both the adaptability of fracture mechanics approaches to TMF and the resulting predictive capabilities of determining material life by crack propagation consideration. Selection of the correct microstructural concepts was emphasised and these concepts were, then adjusted by using data from independent experiments in order to avoid any sort of fitting. It is shown that the cyclic /-integral (δJ_eff concept) is suitable to predict the cyclic lifetime for conditions where the total crack propagation rate is approximately identical to pure fatigue crack growth velocity. In the case that crack propagation is strongly affected by creep, the creep-fatigue damage parameter δ_CF introduced by Riedel can be successfully applied. If environmental effects are very pronounced, the accelerating influence of corrosion on fatigue crack propagation can no longer implicitly be taken into account in the fatigue crack growth law. Instead, a linear combination of the crack growth rate contributions from plain fatigue (determined in vacuum) and from environmental attack is assumed and found to yield a satisfactory prediction, if the relevant corrosion process is taken into account.     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

A QoS management framework for distributed multimedia systems

This paper proposes a high‐performance connection management architecture to design a common QoS framework applied to an ATM network based on the Open Distributed Processing (ODP) concept. We design the QoS framework in accordance from the RM‐ODP information and computational viewpoints. Copyright © 2003 John Wiley & Sons, Ltd.     

A fiber depolarizer using polarization beam splitter loop structure for narrow linewidth light source

A new fiber depolarizer employing a polarization beam splitter loop structure is proposed and demonstrated. The depolarizer is devised for broad-band operation and the depolarization of narrow linewidth light source without any help of polarization controllers or Faraday rotator mirrors. A polarizing method is developed that shows good performance without polarization control unit. Therefore, the proposed depolarizer can be cost-effective and easily configured. From experiments, low output degree of polarization less than 10% is obtained for a narrow linewidth light source.     

Estimation of Aeroelastic Parameters of Bridge Decks Using Neural Networks

A new method of estimating flutter derivatives using artificial neural networks is proposed. Unlike other computational fluid dynamics based numerical analyses, the proposed method estimates flutter derivatives utilizing previously measured experimental data. One of the advantages of the neural networks approach is that they can approximate a function of many dimensions. An efficient method has been developed to quantify the geometry of deck sections for neural network input. The output of the neural network is flutter derivatives. The flutter derivatives estimation network, which has been trained by the proposed methodology, is tested both for training sets and novel testing sets. The network shows reasonable performance for the novel sets, as well as outstanding performance for the training sets. Two variations of the proposed network are also presented, along with their estimation capability. The paper shows the potential of applying neural networks to wind force approximations.