Comments on “Quadratic stabilization of continuous timesystems with state-delay and norm-bounded time-varyinguncertainties”

In the above mentioned paper by Mahmoud-Muthairi (ibid. vol.39 (1994)) a sufficient condition for memoryless stabilization of a class of uncertain linear systems with a variable-state delay and norm-bounded time-varying uncertainties is derived in terms of an algebraic Riccati equation. This Riccati equation depends on several free matrix variables, and a subsequent result in the paper, Theorem 2, states that failure or success of the stabilization algorithm is independent of the selection of these matrix variables. In this paper, we give a counterexample to this Theorem 2 as well as providing a fix     

Structural and electrochemical properties of vanadium oxide thin films grown by d.c. and r.f. reactive sputtering at room temperature

Vanadium oxide thin films were grown at room temperature by direct current and radio-frequency reactive sputtering systems to compare the structural and electrochemical properties. Rutherford backscattering spectrometry and Fourier transform infrared measurements reveal that the composition of the as-deposited films consists of the V₂O₅ phase regardless of the deposition methods. Wide-angle X-ray diffraction measurements show that the crystallinity of the as-deposited V₂O₅ films is different depending on the deposition method. Films deposited by direct current reactive sputtering were amorphous, whereas films deposited by radio-frequency reactive sputtering were crystalline. Scanning electron microscopy measurements show that the V₂O₅ films grown by radio-frequency reactive sputtering had a large grain size but the films grown by direct current reactive sputtering were amorphous. Charge–discharge measurements taken at room temperature with a constant current clearly indicate that the films grown by direct current sputtering demonstrated typical amorphous behavior, whereas the V₂O₅ films grown by radio-frequency sputtering demonstrated the discharge behavior of crystalline V₂O₅. The origin of the structural and electrochemical properties of film grown by radio-frequency reactive sputtering is a self-bias effect. The self-bias effect induces ion bombardment during the growth of vanadium oxide thin film. These results suggest that direct current reactive sputtering is more desirable for growing amorphous V₂O₅ thin film than radio-frequency reactive sputtering.     

Ultra-precision lapping of machinable ceramic Si3N4-BN by in-process electrolytic dressing

The machinable ceramic Si₃N₄-BN is a material which is increasingly being employed for automobile bearings and machinable ceramics. This material is very hard and has high resistance against volatile temperature and wear. It's efficient quality and accurate surfaces have always been of high demand for many applications in the industrial field. Besides, this material is varied by the percentage of BN contained in it, and the characteristics of lapping also varies according to this percentage of BN. Hence, in-process electrolytic dressing for ultra-precision lapping was introduced and used to experiment with the differing BN percentages in machinable ceramic Si₃ N₄. Metal-bonded super-abrasive diamond lapping wheels have superior qualities such as high bond strength, high stability and high machinability. The major problems encountered are wheel loading and glazing, which impedes the effectiveness of the cast-iron bonded diamond lapping wheel and, therefore, dressing should be considered. In this respect, in-process electrolytic dressing (IED) is proposed as an effective method regarding continuous protruding abrasives on the surface of wheels, whereby loading and glazing phenomena can apparently disappear. In this paper, the machining characteristics of machinable ceramic Si₃N₄-BN have been studied by adapting the IED lapping process in terms of the percentage of h-BN material.     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

Effect of surface structure on biomechanical properties and osseointegration

The purpose of this study is to improve the bone-bonding ability between titanium implants and living bone through the control of geometric design and chemical compositions of an implant surface. We compared the tissue healing response and resulting implant stability for three surface designs by characterizing the histological and mechanical properties of the healing tissue around smooth-surfaced Ti–6Al–4V (SS), CP-Ti plasma-spray-coated (PSC), alkali- and heat-treated (AHT) implants. The implants were transversely inserted into a dog thighbone and evaluated at 4, 8, and 12 weeks. Histological examination indicated that initial matrix mineralization leading to osseointegration occurred more rapidly with the AHT implant. During the 4, 8, and 12 week healing periods, new bone on the surface of AHT implant showed denser growth than that on the SS and PSC implants. The more extensive tissue integration and more rapid matrix mineralization with the AHT implant were reflected in the mechanical test data, which demonstrated superior attachment strength and interfacial stiffness for the AHT implant after healing for 4, 8 and 12 weeks of healing because of the mechanical interlocking in the micrometer sized rough surface and the large bonding area between bone and implant caused by the nanosized porous surface structure. Histological and mechanical data demonstrate that with the appropriate surface design selection, bone bone-bonding ability can be improved and can induce acceleration of the healing response, thereby improving the potential for implant osseointegration.     

Isolation and Characterization of Urinary Extracellular Vesicles from Healthy Donors and Patients with Castration-Resistant Prostate Cancer

Prostate cancer (PCa) is the most commonly diagnosed malignancy among men in developed countries. The five-year survival rate for men diagnosed with early-stage PCa is approximately 100%, while it is less than 30% for castration-resistant PCa (CRPC). Currently, the detection of prostate-specific antigens as biomarkers for the prognosis of CRPC is criticized because of its low accuracy, high invasiveness, and high false-positive rate. Therefore, it is important to identify new biomarkers for prediction of CRPC progression. Extracellular vesicles (EVs) derived from tumors have been highlighted as potential markers for cancer diagnosis and prognosis. Specifically, urinary EVs directly reflect changes in the pathophysiological conditions of the urogenital system because it is exposed to prostatic secretions. Thus, detecting biomarkers in urinary EVs provides a promising approach for performing an accurate and non-invasive liquid biopsy for CPRC. In this study, we effectively isolated urinary EVs with low protein impurities using size-exclusion chromatography combined with ultrafiltration. After EV isolation and characterization, we evaluated the miRNAs in urinary EVs from healthy donors and patients with CRPC. The results indicated that miRNAs (miR-21-5p, miR-574-3p, and miR-6880-5p) could be used as potential biomarkers for the prognosis of CRPC. This analysis of urinary EVs contributes to the fast and convenient prognosis of diseases, including CRPC, in the clinical setting.     

A study on the factors that affect the adoption of Smart Water Grid

Due to recent climate changes that accompany drastic changes in water recycle process, extreme floods and droughts are occurring frequently throughout the world. In response to these events, Smart Water Management that refers to implement intelligent water information systems by IT convergence is considered as a new paradigm. In this study, we seek to explore the Smart Water Management, especially the adoption of Smart Water Grid Technology. We aim to review previous studies to identify factors that influence the adoption of the Smart Water Grid and to analyze the importance and priority of the factors affecting Smart Water Grid adoption, thereby presenting the successful adoption measures for Smart Water Grid in Korea. This study set a research model with the influencing factors in relation to the adoption of new IT technologies that were identified through the literature reviews of previous studies based on the TOE framework. This study also conducted empirical analysis of the findings and found out that the issue of privacy protection and security due to hacker’s attack would be emerged as a significant risk factor.     

Simulation of the mushroom cloud generated from a high-energy explosion using large-eddy simulation

We performed numerical simulations of a 20 kT heavy explosion to predict the rise and diffusion of mushroom cloud after the atmospheric pressure is recover     

Characterization of the Secretome of a Specific Cell Expressing Mutant Methionyl-tRNA Synthetase in Co-Culture Using Click Chemistry

Co-culture system, in which two or more distinct cell types are cultured together, is advantageous in that it can mimic the environment of the in vivo niche of the cells. In this study, we presented a strategy to analyze the secretome of a specific cell type under the co-culture condition in serum-supplemented media. For the cell-specific secretome analysis, we expressed the mouse mutant methionyl-tRNA synthetase for the incorporation of the non-canonical amino acid, azidonorleucine into the newly synthesized proteins in cells of which the secretome is targeted. The azidonorleucine-tagged secretome could be enriched, based on click chemistry, and distinguished from any other contaminating proteins, either from the cell culture media or the other cells co-cultured with the cells of interest. In order to have more reliable true-positive identifications of cell-specific secretory bodies, we established criteria to exclude any identified human peptide matched to bovine proteins. As a result, we identified a maximum of 719 secreted proteins in the secretome analysis under this co-culture condition. Last, we applied this platform to profile the secretome of mesenchymal stem cells and predicted its therapeutic potential on osteoarthritis based on secretome analysis.     

Intratracheal Transplantation of Mesenchymal Stem Cells Attenuates Hyperoxia-Induced Microbial Dysbiosis in the Lungs,Brain, and Gut in Newborn Rats

We attempted to determine whether intratracheal (IT) transplantation of mesenchymal stem cells (MSCs) could simultaneously attenuate hyperoxia-induced lung injuries and microbial dysbiosis of the lungs, brain, and gut in newborn rats. Newborn rats were exposed to hyperoxia (90% oxygen) for 14 days. Human umbilical cord blood-derived MSCs (5 × 10⁵) were transplanted via the IT route on postnatal day (P) five. At P14, the lungs were harvested for histological, biochemical, and microbiome analyses. Bacterial 16S ribosomal RNA genes from the lungs, brain, and large intestine were amplified, pyrosequenced, and analyzed. IT transplantation of MSCs simultaneously attenuated hyperoxia-induced lung inflammation and the ensuing injuries, as well as the dysbiosis of the lungs, brain, and gut. In correlation analyses, lung interleukin-6 (IL-6) levels were significantly positively correlated with the abundance of Proteobacteria in the lungs, brain, and gut, and it was significantly inversely correlated with the abundance of Firmicutes in the gut and lungs and that of Bacteroidetes in the lungs. In conclusion, microbial dysbiosis in the lungs, brain, and gut does not cause but is caused by hyperoxic lung inflammation and ensuing injuries, and IT transplantation of MSCs attenuates dysbiosis in the lungs, brain, and gut, primarily by their anti-oxidative and anti-inflammatory effects.