Testing the dynamic full access property of a class of multistageinterconnection networks

The banyan network, and networks topologically equivalent to it, have recently been adopted as interconnection networks in multiprocessor systems. Often, a multiprocessor system is reconfigured when the banyan network becomes faulty. It is possible to avoid a complicated reconfiguration process as long as the faulty banyan network still possesses the dynamic full access (DFA) property. In this paper, we determine a necessary and sufficient condition for a faulty banyan network to possess the DFA property and design a test procedure based on the condition. The test procedure can be used to decompose a faulty banyan network into subsystems possessing the DFA property. We also evaluate the probability that a banyan network loses the DFA property, given the number of faulty switching elements. It is found that as long as faults do not occur in switching elements located in the first and last stages, this probability is very small, even when there are quite a few faulty switching elements     

Statistical synchronization among participants in real-time multimedia conferencing

In this paper, an algorithm to determine the set of packets generated continuously and periodically from different participants that are arriving at a node either for mixing at the master of a conference, or for simply playing back at a regular participant of a conference, is proposed. The essence of the algorithm is to estimate the expected packet arrival time (or reference time) for each participant. With the reference time at hand, the maximum jitter and the optimum waiting time for a mixer to wait packets from all participants can be determined. An enhancement to improve synchronization which deals with the estimation of the time offsets between the individual periods of the sources and the period of the receiver is also presented. The error of the proposed algorithm is enumerated by the Chernoff bound and demonstrated by simulation and is shown to be acceptable in practical application. The algorithm can also be employed when traffic sources operate with different periods.     

Effects of Al3+ and Be2+ ions combined with NaF on ciliary process adenylyl cyclase activity and aqueous humor dynamics in the rabbit eye

PURPOSE: The activity of Al3+, Ga3+, and Be2+ ions in the presence of NaF to directly activate G-proteins was investigated by their potentiative effect on forskolin (FSK)-activated adenylyl cyclase in rabbit ciliary process membranes and their effects on aqueous humor dynamics in vivo. METHODS: Adenylyl cyclase (AC) was determined by radiometric conversion of ATP to cAMP by the particulate fraction of rabbit ciliary processes. Intravitreal injections of sterile solutions of analytical grade salts were made into the center of the vitreous in a volume of 20 microliters. Intraocular pressure, aqueous humor flow, and uveoscleral outflow measurements were made by pneumatonometry, fluorophotometry, and fluorescein-dextran method, respectively. Outflow facility was determined by tonography in the intact eyes and by two-level constant pressure perfusion in cannulated eyes. RESULTS: Both Al3+ (EC50, 40 mumol/l) and Be2+ (EC50, 11 mumol/l) in the presence of 0.5-2 mM NaF activated the stimulatory G-protein Gs. Ga3+ was ineffective and did not antagonize the activation by Al3+. Intravitreal injections of Al3+ (1 mumol/eye) or Be2+ (0.5 or 1 mumol/eye) had no significant intraocular pressure (IOP) effect, nor did 1.5 or 3 mumol/eye of NaF, but when either cation was injected together with NaF, IOP decreased by up to 40% for up to 140 hr. At the time of maximum IOP effect (72 hr) aqueous humor flow determined by fluorophotometry was decreased in BeCl2+ NaF-treated eyes by 40% relative to BeCl2-treated eyes; however, tonographic facility of outflow was unaffected. Uveoscleral flow was also decreased by 38% in BeCl2+ NaF treated eyes. CONCLUSIONS: These findings support the hypothesis that Gs activation of ciliary process adenylyl cyclase decreases aqueous humor formation rate in rabbit eyes, and that activation of G-proteins mediates contraction of ciliary muscles causing a decrease of aqueous humor outflow via the uveoscleral route. The results suggest that G-proteins putatively involved in trabecular facility changes are less sensitive to activation by BeF3- than are other parameters of aqueous humor dynamics.     

Gonadal steroids have paradoxical effects on brain oxytocin receptors

Specific brain receptors for oxytocin have been described in several mammalian species. The distribution of these receptors differs greatly across species and in the rat, receptor binding in specific brain regions appears to depend upon gonadal steroids. This study used in vitro receptor autoradiography to examine the effects of testosterone on oxytocin receptor binding in the mouse forebrain. Three groups of male mice were compared: castrates treated with blank capsules, castrates treated with testosterone filled capsules, and intact males. Irrespective of steroid treatment, the distribution of oxytocin receptors in mouse forebrain differed markedly from patterns previously described in the rat. In addition to these species differences in receptor distribution, testosterone had effects in the mouse which differed from the induction of receptors previously reported in the rat. In the mouse ventromedial nucleus of the hypothalamus, binding in the untreated castrate males was approximately double that observed in either the intact or the testosterone-treated castrates. In other regions of the mouse brain, such as the intermediate zone of the lateral septum, binding to oxytocin receptors was increased with testosterone treatment. These results suggest that the brain oxytocin receptor varies across species not only in its distribution but also in its regional regulation by gonadal steroids. These apparently paradoxical changes in oxytocin receptor binding may result from either direct or indirect effects of gonadal steroids in mouse brain.     

Tyrosine hydroxylase expression in primary cultures of olfactory bulb: role of L-type calcium channels

Sensory activity mediates regulation of tyrosine hydroxylase (TH), the first enzyme in the dopamine biosynthetic pathway, in the rodent olfactory bulb. The current studies established for the first time primary cultures of neonatal mouse olfactory bulb expressing TH and tested whether L-type calcium channels mediate the activity-dependent regulation of the dopamine phenotype. After 1 d in vitro (DIV), a small population of TH-immunostained neurons that lacked extensive processes could be demonstrated. After an additional 2 DIV in serum-free medium, the number of TH neurons had doubled, and they exhibited long interdigitating processes. Membrane depolarization for 48 hr with 50 mM KCl produced a further 2.4-fold increase in the number of TH-immunoreactive neurons compared with control cultures. Increased TH neuron number required at least 36 hr of exposure to KCl. Forskolin, which increases intracellular cAMP levels, induced a 1.5- to 1.6-fold increase in the number of TH-immunostained neurons. Combined treatment with KCl and forskolin was not additive. Nifedipine, an L-type calcium channel blocker, completely prevented the depolarization-mediated increase in TH expression but did not block the response to forskolin. Treatment with Bay K8644, an L-type calcium channel agonist, also significantly increased the number of TH-expressing neurons. Depolarization also induced alterations in neuritic outgrowth, resulting in a stellate versus an elongate morphology that, in contrast, was not prevented by nifedipine. These results are the first demonstration that in vitro, as in vivo, depolarization increases TH expression in olfactory bulb and that L-type calcium channels mediate this activity-dependent regulation of the dopamine phenotype.     

Comparing the Effectiveness of Coatings on Carbide andCermet Cutting Tool Inserts

A series of metal cutting experiments was performed on a CNC lathe to evaluate the performance of various coatings on different tool substrates. The workpiece material was plain medium carbon steel and the cutting tool materials were carbide and cermet inserts coated with various single as well as multilayer coatings. Machining was done under various cutting conditions of speed and feed-rate, and for various durations of Cutting. The output parameters studied were the cutting forces (axial, radial and tangential), the surface roughness of the workpiece, as well as the tool wear (crater and flank wear). From these results, the performances of the various cutting inserts are evaluated and compared. Results show that cutting forces are significantly lower when using coated cermets than when using coated carbides although different coatings on the same substrate also result in different cutting forces. However, there is less difference in the surface roughness of the finished workpiece for the various coatings and substrates.     

Oxidative regeneration of sulfided sorbent by H2S without emission of SO2

Much SO₂, another perilous air pollutant, was emitted during the oxidative regeneration of sulfided sorbent by H₂S. In order to prevent emission of SO₂, we carried out oxidative regeneration with the physical mixture of CaO and sulfided sorbent and investigated the effect of regeneration temperature and oxygen concentration on the reactivity of CaO with S0₂. The effluent gases were analyzed by G.C. and the properties of sorbent were characterized by XRD. SEM, TG/DTA and EPMA. Deterioration of reactivity of CaO with S0₂ resulted in increment of emission of SO₁₂ due to the structural changes of CaO above 750°C and that at 850°C was more severe. Furthermore EPMA and XRD analysis revealed that product layer diffusion through the solid product, CaSO₄, was the rate limiting step for CaO sulfidation. The reaction of CaO w:.th SO₂ was first order approximately and that was accelerated by high O₂ concentration.     

Area- and time-specific marginal capacity costs of electricity distribution

Marginal costs of electricity vary by time and location. In the past, researchers attributed the variations to factors related to electricity generation and transmission. These authors, however, have not analyzed possible variations in marginal distribution capacity costs (MDCC). The objectives of this paper are:

1. (i) to show that large MDCC variations are due to the dispersion in distribution capital expenditures by time and space,

2. (ii) to propose a method for quantifying the area- and time-specific MDCC in the presence of lumpy investments, and

3. (iii) to compare our MDCC estimates to those commonly used in the electric utility industry.

Our proposed method and its results were adopted by the California Public Utilities Commission (CPUC) in 1992 for Pacific Gas and Electric Company (PG&E), the largest privately owned electric utility in the U.S.     

隧道挖掘中采用补偿灌浆的实例

在英国伦敦多克兰斯轻便铁路刘易舍姆延长线（DLR－LWE）双隧道掘进工程中，在敏感建筑物下进行了补偿灌浆，以防止隧道开挖引起的过度沉降。但是，过度灌浆也会对隧道下部施加超越。介绍了由隧道掘进承包商所编辑的关于地面和建筑物沉降以及由补偿灌浆引起的隧道衬砌变形的详细现场监测数据。     

Principle and applications of retroreflective vision sensing for discrete part-presentation

For flexible manufacturing of short production runs where a large variety of product sizes, component types, and surface reflectance characteristics are encountered, it is desirable to build flexible computer-controlled systems for feeding parts into machine tools or assembly processes that combine maximum flexibility and reliability with minimum cost and cycle-time. This is not a general bin-picking problem; the parts are assumed to be propositioned approximately in totes/pallets/kits with regularly spaced locations. This article presents a machine vision technique based on the principle of retroreflective vision sensing for part-presentation. Since retroreflective material has a distinctive surface reflectance that is not commonly found in natural or man-made objects, the use of retroreflective surfaces enables reliable high object-to-background contrast images to be obtained for a wide variety of objects. Unlike conventional machine vision techniques, which rely on the variance of the surface reflectance of the objects to generate detailed images, retroreflective vision sensing aims at generating a reliable two-dimensional digital object silhouettes so that the location and orientation of the part can be reliably determined. Two application examples, machine loading and assembly, are illustrated.