Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black‐filled epoxidized natural rubber vulcanizates

Hygrothermally decomposed polyurethane (HD‐PUR) was mixed up to 20 phr in epoxidized natural rubber (with 50 mol % epoxidation; ENR50) recipes, and the curing and mechanical behaviors were studied. Mechanical testing of the ENR50/HD‐PUR vulcanizates determined the tensile, tear, compression‐set, hardness, abrasion, hysteresis, and resilience properties. No significant changes were observed in the tensile properties with the incorporation of HD‐PUR. The ENR50 compounds showed an increase in compression set with increasing HD‐PUR content. Rubbers cured by a semi‐efficient vulcanization system gave the best overall performance. A further improvement in curing and mechanical properties was achieved by the carbon black grade N330 being replaced with a more active grade (N375). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2265–2276, 2002     

3D soft-tissue tracking using spatial-color joint probability distribution and thin-plate spline model

Visual tracking techniques based on stereo endoscope are developed to measure tissue motion in robot-assisted minimally invasive surgery. However, accurate 3D tracking of tissue surfaces remains challenging due to complicated deformation, poor imaging conditions, specular reflections and other dynamic effects during surgery. This study employs a robust and efficient 3D tracking scheme with two independent recursive processes, namely kernel-based inter-frame motion estimation and model-based intra-frame 3D matching. In the first process, target region is represented in joint spatial-color space for robust estimation. By defining a probabilistic similarity measure, a mean-shift-based iterative algorithm is derived for location of the target region in a new image. In the second process, the thin-plate spline model is used to fit the 3D shape of tissue surfaces around the target region. An iterative algorithm based on an efficient second-order minimization technique is derived to compute optimal model parameters. The two processes can be computed in parallel. Their outputs are combined to recover 3D information about the target region. The performance of the proposed method is validated using phantom heart videos and in vivo videos acquired by the daVinci^®${\mathrm{daVinci}}^{\circledR }$ surgical robotic platform and a synthesized data set with known ground truth.     

Hybrid clustering solution selection strategy

Cluster ensemble approaches make use of a set of clustering solutions which are derived from different data sources to gain a more comprehensive and significant clustering result over conventional single clustering approaches. Unfortunately, not all the clustering solutions in the ensemble contribute to the final result. In this paper, we focus on the clustering solution selection strategy in the cluster ensemble, and propose to view clustering solutions as features such that suitable feature selection techniques can be used to perform clustering solution selection. Furthermore, a hybrid clustering solution selection strategy (HCSS) is designed based on a proposed weighting function, which combines several feature selection techniques for the refinement of clustering solutions in the ensemble. Finally, a new measure is designed to evaluate the effectiveness of clustering solution selection strategies. The experimental results on both UCI machine learning datasets and cancer gene expression profiles demonstrate that HCSS works well on most of the datasets, obtains more desirable final results, and outperforms most of the state-of-the-art clustering solution selection strategies.     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Effect of time/temperature treatment parameters on depolymerization of chitosan

Depolymerization of the biopolymer chitosan by an autoclaving process at 121°C and 15 psi was investigated using various treatments. Acetic acid was found to be the most effective solvent in decreasing chitosan viscosity among the six organic acids tested. The rate of viscosity decrease increased with increasing chitosan concentration. The viscosity of 1% chitosan in 1% acetic acid decreased rapidly to 91% of the initial viscosity following the initial 15 min of autoclaving. This decreased gradually to 93% and 94% in 30 and 60 min, respectively, without being adversely affected by the chitosan solution volume. The degree of deacetylation was comparable before and after autoclaving for 60 min. Chitosan at three molecular weights (M_r = 1597, 1110, and 789 kDa) decreased in molecular weight by 46%–51% in the 15‐min treatment, 55%–60% in the 30‐min treatment, and 60%–62% in the 60‐min treatment. The addition of 0.1%–1.0% (v/v) concentrations of hydrogen peroxide to the chitosan solution autoclaved for 15 min decreased viscosity by 94%–98% and molecular weight by 69%–83%. This process is a simple, timesaving, homogeneous depolymerization procedure, and it is possible to prepare partially hydrolyzed chitosan with specified molecular weights by regulating the time of treatment. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1890–1894, 2003     

Use of a sex attractant and an inhibitor for monitoring winter moth and bruce spanworm populations

A single sex pherormone component was isolated from abdominal tip extracts of female Bruce spanworm.Operophtera bruceata (Hulst). This was identified as (Z,Z,Z)-1,3,6,9-nonadecatetraene by capillary gas chromatography (GC), electroantennography, and mass spectrometry. In addition, hexane extracts of female abdominal tips from Bruce spanworm and the winter moth.O. brumata L., were analyzed by GC coupled to an electroantennographic detector (GC-EAD). The extracts ofO. bruceata andO. brumata females elicited only a single response, at the same retention time, from antennae of their conspecific and reciprocal males. In field tests conducted in Saskatchewan, traps baited with the synthetic tetraene captured Bruce spanworm males. In tests carried out on Vancouver Island, British Columbia, where the two species coexist, both Bruce spanworm and winter moth males were captured. The attractancy of lures containing the synthetic pheromone alone and in combination with several structurally related analogs was field tested at both locations. One of these, an isomer of the natural pheromone, (E,Z,Z)-1,3,6,9-nonadecatetraene, inhibited the capture of Bruce spanworm males but had no effect upon the number of winter moth males which were taken. Thus, populations of these two very similar species can be distinguished by employing traps baited with pheromone ± the inhibitor. Coneorifice Hara traps were found useful for field trapping males of both species.Issued as NRCC No. 26107     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

Adhesion-Delamination Mechanics of a Prestressed Circular Film Adhered onto a Rigid Substrate

A thin circular film clamped at the periphery is adhered to the planar surface of a rigid cylindrical punch. An external tensile load is applied to the punch, causing the film to delaminate from the substrate and the circular contact edge to contract. The film spontaneously separates from the punch, or pulls off, when the contact radius reduces to a range between 0.1758 and 0.3651 of the film radius, depending on the magnitude of the residual membrane stress. The mechanical delamination process is derived by a thermodynamic energy balance based on a coupled interfacial adhesion and residual membrane stress. The theoretical model has significant implications in nanoforce measurement, microelectromechanical systems (MEMS) comprising active moveable films, and biological cell adhesion.     

Heat capacity of copolymers of chlorotrifluoroethylene and vinylidene fluoride

The heat capacities of two copolymers of chlorotrifluorethylene and vinylidene fluoride, one 30:70 mol % and the other 44:56 mol % in composition, were measured in an adiabatic calorimeter from 80 to 340 K. The glass-transition points T_g observed at 256 and 269 K for the 30:70 and 44:56 samples, respectively, closely agree with the prediction of the theory of Flory and Fox; the accompanying jump of heat capacities at these points was found to be 2.2 cal/K ‘per bead’ for both samples, in fair agreement with the ‘constant ΔC_p rule’. A small peak was observed immediately above T_g, and interpreted as a time-dependent effect arising from the lack of equilibrium in the region. The data of the heat capacities were analysed in detail in the framework of the Tarasov model and the principle of additivity, and were found to agree well ( 1–3%) with theory up to the respective glass-transition points in all cases, thus giving support to the validity of the previously published segmental values of heat capacity and of characteristic temperature θ₁.