Organic wavelength‐converting‐film‐based hybrid planar white light‐emitting diodes

Abstract— In this study, organic wavelength‐converting films (WCFs) applied to InGaN blue LED‐based hybrid planar WLED has been fabricated. The organic dye layer in the WCF was formed between the upper and bottom polymer sheets by using a simple roll‐laminating technique. Subsequently, the hybrid planar WLEDs have been fabricated based upon these films. The luminous efficiency of green WCF‐based hybrid planar WLEDs with a single blue LED chip was 34.6 lm/W and that of red‐WCF‐assisted green WCF‐based hybrid planar WLEDs was 27.3 lm/W under 20 mA. The use of WCF to fabricate hybrid planar WLEDs showed better stability than that of directly coating organic color‐convergence materials (CCMs) on the LED chips. It only decreased to about 10% of the initial wavelength‐converting intensity after 1 hour of continual operation at 20 mA.     

Position control of a mobile inverted pendulum system using radial basis function network

This article presents the implementation of position control of a mobile inverted pendulum (MIP) system by using the radial basis function (RBF) network. The MIP has two wheels to move on the plane and to balance the pendulum. The MIP is a nonlinear system whose dynamics is nonholonomic. The goal of this study was to control the MIP to maintain the balance of the pendulum while tracking a desired position of the cart. The reference compensation technique scheme is used as a neural network control method for the MIP. The back-propagation learning algorithm of the RBF network is derived for online learning and control. The control algorithm has been embedded on a DSP 2812 board to achieve real-time control. Experimental results are conducted and show successful control performances of both balancing and tracking the desired position of the MIP.     

Multi-objective FMS process planning with various flexibilities using a symbiotic evolutionary algorithm

This paper presents an evolutionary algorithm, called the multi-objective symbiotic evolutionary algorithm (MOSEA), to solve a multi-objective FMS process planning (MFPP) problem with various flexibilities. The MFPP problem simultaneously considers four types of flexibilities related to machine, tool, sequence, and process and takes into account three objectives: balancing the machine workload, minimizing part movements, and minimizing tool changes. The MOSEA is modeled as a two-leveled structure to find a set of well-distributed solutions close to the true Pareto optimal solutions. To promote the search capability of such solutions, two main processes imitating symbiotic evolution and endosymbiotic evolution are introduced, together with an elitist strategy and a fitness sharing scheme. Evolutionary components suitable for the MFPP problem are provided. With a variety of test-bed problems, the performance of the proposed MOSEA is compared with those of existing multi-objective evolutionary algorithms. The experimental results show that the MOSEA is promising in solution convergence and diversity.     

Soft set theory applied to p-ideals of BCI-algebras related to fuzzy points

The notions of $(\overline{\in}, \overline{\in} \vee \overline{\hbox{q}})The notions of ([`( ? )],[`( ? )] ú[`q])(\overline{\in}, \overline{\in} \vee \overline{\hbox{q}})-fuzzy p-ideals and fuzzy p-ideals with thresholds related to soft set theory are discussed. Relations between ([`( ? )],[`( ? )] ú[`q])(\overline{\in}, \overline{\in} \vee \overline{\hbox{q}})-fuzzy ideals and ([`( ? )],[`( ? )] ú[`q])(\overline{\in}, \overline{\in} \vee \overline{\hbox{q}})-fuzzy p-ideals are investigated. Characterizations of an ([`( ? )],[`( ? )] ú[`q])(\overline{\in}, \overline{\in} \vee \overline{\hbox{q}})-fuzzy p-ideal and a fuzzy p-ideal with thresholds are displayed. Implication-based fuzzy p-ideals are discussed.     

Measuring the degree of eyestrain caused by watching LCD and PDP devices

In this paper, we propose a new way of measuring the degree of eyestrain caused by watching LCD (Liquid Crystal Display) and PDP (Plasma Display Panel) devices. In the experiments, we used a head-mounted eye capturing device and an illumination setup that was designed to avoid specular reflections caused by glasses or contact lenses. Using the captured eye images, we analyzed the eye blinking and changes of pupil sizes (pupil accommodation), using a real-time image processing algorithm. Then we analyzed the degree of eyestrain based on the calculated blinking rate and the pupil accommodation speed. The proposed method offers five improvements over previous methods. First, we perform a comparative analysis of LCD and PDP devices based on the degree of eyestrain. Second, to analyze the degree of eyestrain, we use quantitative data such as the blinking rate and the pupil accommodation speed. Third, we measure the accurate eye blinking and changes of pupil sizes by using high-resolution and zoomed eye image sequences. Fourth, since the camera and illuminative system are based on a specular reflective model, the proposed method can be used with subjects that wear glasses or contact lenses. Fifth, the proposed method is performed at real-time speed.Experimental results showed that the degree of eyestrain when watching LCD devices was greater than that when watching PDP devices.

Relevance to industry

In the large display industry, LCD and PDP devices have become more and more prevalent. In the past, LCD devices have been compared to PDP devices in terms of factors such as spatial resolution, brightness, contrast levels, etc. To perform more accurate comparisons based on human factor, we are proposing a new way of comparing LCD to PDP devices based on the degree of eyestrain.     

Design of micromirror actuator by ionic polymer metal composites

Microactuators for micromirror system have found many applications in various areas including projection displays, optical switches, RF switches and so on. In this paper we demonstrated micromirror actuator using ionic polymer metal composites (IPMC) that is a suitable candidate, since it has many attractive qualities such as durability, aquatic, miniature and light-weighted. Specially, IPMC has extraordinary advantages which are simple bending motion for low driving voltage (1–2 V), low power consumption, and simple structure. The IPMC actuator is made of Nafion NE-1110 (Dupont Co, Ltd., 260 µm thick) layer and electrode (platinum) layers and driven by 1–4 V. The displacement measured vertically is 0.25 mm and tilting angle is 11.3°. The angular motion, which is more than 10°, is a good advantage in the field of display module. This paper shows that the IPMC actuator has enough possibility for other applications.     

A method of stepwise benchmarking for inefficient DMUs based on the proximity-based target selection

DEA is a useful nonparametric method of measuring the relative efficiency of a DMU and yielding a reference target for an inefficient DMU. However, it is very difficult for inefficient DMUs to be efficient by benchmarking a target DMU which has different input use. Identifying appropriate benchmarks based on the similarity of input endowment makes it easier for an inefficient DMU to imitate its target DMUs. But it is rare to find out a target DMU, which is both the most efficient and similar in input endowments, in real situation. Therefore, it is necessary to provide an optimal path to the most efficient DMU on the frontier through several times of a proximity-based target selection process. We propose a dynamic method of stepwise benchmarking for inefficient DMUs to improve their efficiency gradually.The empirical study is conducted to compare the performance between the proposed method and the prior methods with a dataset collected from Canadian Bank branches. The comparison result shows that the proposed method is very practical to obtain a gradual improvement for inefficient DMUs while it assures to reach frontier eventually.     

Consistent color and detail transfer from multiple source images for video and images

In this paper, we propose a method to jointly transfer the color and detail of multiple source images to a target video or image. Our method is based on a probabilistic segmentation scheme using Gaussian mixture model (GMM) to divide each source image as well as the target video frames or image into soft regions and determine the relevant source regions for each target region. For detail transfer, we first decompose each image as well as the target video frames or image into base and detail components. Then histogram matching is performed for detail components to transfer the detail of matching regions from source images to the target. We propose a unified framework to perform both color and detail transforms in an integrated manner. We also propose a method to maintain consistency for video targets, by enforcing consistent region segmentations for consecutive video frames using GMM-based parameter propagation and adaptive scene change detection. Experimental results demonstrate that our method automatically produces consistent color and detail transferred videos and images from a set of source images.     

A method to exchange procedurally represented 2D CAD model data using ISO 10303 STEP

Procedural models have the advantage of being easy to edit simply by changing the values of the parameters of their constructional operations. Such models are said to embody design intent, in the sense that modifications to them conform to the method of creation used by their original creator. They also comply with any constraints implied by the particular constructional operations used. This paper introduces the development and standardization process of the ISO 10303-112 specification and describes the concept of procedural 2D modeling, a method of representing procedural 2D CAD models in STEP in harmony with other STEP resources. The feasibility of procedural 2D modeling commands for the exchange of procedurally represented 2D CAD model data is demonstrated through an experiment where procedural 2D CAD model data in neutral form generated with an in-house 2D modeling system are translated to and modified in a commercial 3D mechanical CAD system.     

Characterization of terrestrial water dynamics in the Congo Basin using GRACE and satellite radar altimetry

The Congo Basin is the world's third largest in size (~ 3.7 million km²), and second only to the Amazon River in discharge (~ 40,200 m³ s^− 1 annual average). However, the hydrological dynamics of seasonally flooded wetlands and floodplains remains poorly quantified. Here, we separate the Congo wetland into four 3° × 3° regions, and use remote sensing measurements (i.e., GRACE, satellite radar altimeter, GPCP, JERS-1, SRTM, and MODIS) to estimate the amounts of water filling and draining from the Congo wetland, and to determine the source of the water. We find that the amount of water annually filling and draining the Congo wetlands is 111 km³, which is about one-third the size of the water volumes found on the mainstem Amazon floodplain. Based on amplitude comparisons among the water volume changes and timing comparisons among their fluxes, we conclude that the local upland runoff is the main source of the Congo wetland water, not the fluvial process of river-floodplain water exchange as in the Amazon. Our hydraulic analysis using altimeter measurements also supports our conclusion by demonstrating that water surface elevations in the wetlands are consistently higher than the adjacent river water levels. Our research highlights differences in the hydrology and hydrodynamics between the Congo wetland and the mainstem Amazon floodplain.