Quantifying Biomediated Ground Improvement by Ureolysis: Large-Scale Biogrout Experiment

Biogrouting is a biological ground improvement method, in which microorganisms are used to induce carbonate precipitation in the subsurface in order to increase the strength and stiffness of granular soils. In this paper the results of a large-scale experiment (100?m3) are presented, in which the feasibility of biogrouting as a ground improvement method is investigated using techniques and equipment similar to those used in potential applications. In situ geophysical measurements were used to monitor the biogrouting process during treatment and indicated that the stiffness had increased significantly after one day of treatment. The results of unconfined compressive strength tests on samples which were excavated after treatment were used to assess the distribution of mechanical properties throughout the cemented sand body, which correlated quite well with the results of the in situ geophysical measurements. The stiffness increase could be quantified as a function of the injected volume of grouting agents and the distance from the injection points. These results will serve as an important benchmark for future applications of biomediated ground improvement.     

Divergent principles in third world rural planning: a case study on impoldering

Third World rural planning involves the transfer of First World technologies to the socially and ecologically vulnerable tropical environment. This transfer is guided by normative, “ideological” views concerning social and environmental issues which often remain implicit. To uncover these views, a content analysis of a series of papers has been carried out, focused on impoldering as a type of project with far reaching social and environmental impacts. Three types of “ideologies” could be distinguished, which have been labelled as sociocratic, eco‐sociocratic and technocratic. They differentiate significantly with regard to (1) values attached to ecological and cultural systems, (2) preferred pace and scale of projects, (3) envisaged project feasibility, (4) the range of feasible alternatives, as well as (5) the institutional background of their adherents. The latter separation, however, is not complete. This may stimulate the growth of insight in the normative background of the seemingly objective rationality of project design.     

How can you resist? Executive control helps romantically involved individuals to stay faithful.

In the present research, we examined why some people have more difficulty than others in staying faithful to their romantic partners. Three studies supported our main prediction that executive control is associated with romantically involved individuals' ability to stay faithful. Study 1 showed that participants with a higher level of executive control reported less difficulty in staying faithful to their partners than did those with lower levels of executive control. In Study 2, romantically involved male participants were placed in a waiting room together with an attractive female confederate. Results showed that participants with a higher level of executive control showed less flirting behavior with the confederate than did those with lower levels of executive control. Study 3 demonstrated that a higher level of executive control was related to a lower expressed desire to meet an attractive other, but only for romantically involved participants. Together, these studies showed that executive control helps romantically involved individuals to deal with the lure of attractive alternatives. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Negligible depletion solid-phase microextraction with radiolabeled analytes to study free concentrations and protein binding: an example with [3H]estradiol

A new method is presented that enables sensitive measurement of free concentrations of radiolabeled ligands. Additionally, protein binding of radiochemicals in complex matrixes can be determined with this new technique that combines negligible depletion solid-phase microextraction (nd-SPME) with liquid scintillation counting (LSC) as detection. [3H]Estradiol was taken as an example compound. Possible matrix effects of protein on fiber uptake kinetics were studied. No matrix effect was found, either by fouling of the fiber, or by changed uptake kinetics. The validity of the method was shown in the determination of the affinity constant (Ka) of estradiol for human serum albumin (HSA). The Ka was estimated at 8.9 x 10(4) M(-1), which corresponds well with literature values. This study shows that nd-SPME is suitable to study the free concentration and protein binding of [3H]estradiol. The method described in this paper combines the advantages of nd-SPME with the advantages of radiolabeled analytes, creating a timesaving, simple, and sensitive analytical tool that will be particularly useful in complex matrixes containing many potential interferences for chromatographic methods.     

The location of a resistive shunt harmonic impedance along a distribution feeder and its influence on harmonic propagation

Although complete compensation is only possible using true active filters, resistive shunt harmonic impedances (SHI) have been shown to provide a considerable reduction of the harmonic propagation. In this paper, the harmonic mitigation potential of a resistive SHI is discussed concerning its influence on the voltage distortion profile along a typical distribution feeder, with the location of the SHI along the feeder as a parameter. Although the distortion values are dependent on the SHI location, it is shown that the end of the feeder is generally a good location to install the SHI, especially when the power system parameters can vary or are unknown. Calculations are performed on a typical radial distribution feeder. Both the power factor correction capacitors and the non-linear loads are concentrated in single nodes. The linear loads are disconnected to obtain the worst case for the voltage distortion. Also some measurements on a scale model of a typical distribution feeder are done and the experimental results confirm the results obtained from simulations.     

Dynamical diseases of brain systems: different routes to epileptic seizures

In this overview, we consider epilepsies as dynamical diseases of brain systems since they are manifestations of the property of neuronal networks to display multistable dynamics. To illustrate this concept we may assume that at least two states of the epileptic brain are possible: the interictal state characterized by a normal, apparently random, steady-state electroencephalography (EEG) ongoing activity, and the ictal state, that is characterized by paroxysmal occurrence of synchronous oscillations and is generally called, in neurology, a seizure. The transition between these two states can either occur: 1) as a continuous sequence of phases, like in some cases of mesial temporal lobe epilepsy (MTLE); or 2) as a sudden leap, like in most cases of absence seizures. In the mathematical terminology of nonlinear systems, we can say that in the first case the system's attractor gradually deforms from an interictal to an ictal attractor. The causes for such a deformation can be either endogenous or external. In this type of ictal transition, the seizure possibly may be anticipated in its early, preclinical phases. In the second case, where a sharp critical transition takes place, we can assume that the system has at least two simultaneous interictal and ictal attractors all the time. To which attractor the trajectories converge, depends on the initial conditions and the system's parameters. An essential question in this scenario is how the transition between the normal ongoing and the seizure activity takes place. Such a transition can occur either due to the influence of external or endogenous factors or due to a random perturbation and, thus, it will be unpredictable. These dynamical changes may not be detectable from the analysis of the ongoing EEG, but they may be observable only by measuring the system's response to externally administered stimuli. In the special cases of reflex epilepsy, the leap between the normal ongoing attractor and the ictal attractor is caused by a well-defined external perturbation. Examples from these different scenarios are presented and discussed.     

Ultra-Low-Power Interface Chip for Autonomous Capacitive Sensor Systems

Traditionally, most of the sensor interfaces must be tailored towards a specific application. This approach results in a high recurrent design cost and time to market. On the other hand, generic sensor interface design reduces the costs and offers a handy solution for multisensor applications. This paper presents a generic sensor interface chip (GSIC), which can read out a broad range of capacitive sensors. It contains capacitance-to-voltage converters, a switched-capacitor amplifier, an analog-to-digital converter, oscillators, clock generation circuits and a reference circuit. The system combines a very low-power design with a smart energy management, which adapts the current consumption according to the accuracy and speed requirements of the application. The GSIC is used in a pressure and an acceleration monitoring system. The pressure monitoring system achieves a current drain of 2.3 muA for a 10-Hz sample frequency and an 8-bit accuracy. In the acceleration monitoring system, we measured a current of 3.3 muA for a sample frequency of 10 Hz and an accuracy of 9 bits     

CrimeSPOT: A language and runtime for developing active wireless sensor network applications

Advances in wireless sensing and actuation technology allow embedding significant amounts of application logic inside wireless sensor networks. Such active WSN applications are more autonomous, but are significantly more complex to implement. Event-based middleware lends itself to implementing these applications. It offers developers fine-grained control over how an individual node interacts with the other nodes of the network. However, this control comes at the cost of event handlers which lack composability and violate software engineering principles such as separation of concerns. In this paper, we present CrimeSPOT as a domain-specific language for programming WSN applications on top of event-driven middleware. Its node-centric features enable programming a node’s interactions through declarative rules rather than event handlers. Its network-centric features support reusing code within and among WSN applications. Unique to CrimeSPOT is its support for associating application-specific semantics with events that carry sensor readings. These preclude transposing existing approaches that address the shortcomings of event-based middleware to the domain of wireless sensor networks. We provide a comprehensive overview of the language and the implementation of its accompanying runtime. The latter comprises several extensions to the Rete forward chaining algorithm. We evaluate the expressiveness of the language and the overhead of its runtime using small, but representative active WSN applications.