Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The differential scanning calorimeter heating curves of uniaxially oriented poly(ethylene terephthalate) (PET) fibers with three peaks were analyzed by using a newly proposed equation. The diffusion-controlled crystallization theory is suitable for describing cold crystallization of uniaxially oriented PET fibers. A crystallization model was proposed based on the kinetic parameters obtained. The model embraces the three sub-processes of crystallization corresponding to different growth geometries. The first sub-process corresponds to the nucleation of ordered molecular segments or the radial growth of preformed nucleus, resulting in the shorter bundle-like entities. The second sub-process corresponds to further growth of the bundle-like crystallites along chain direction, resulting in the longer bundle-like entities. The third sub-process corresponds to the three-dimensional growth of crystallites relating to the random segments, resulting in the spherical entities.     

化学铣切槽液中Na2S的分析

本文采用“碘量法”测定化铣液中的硫化钠，分析结果的准确度和精密度完全能够满足生产要求。     

Reprint of “Suppressing propylene carbonate decomposition by coating graphite electrode foil with silver”

A method has been developed to suppress the decomposition of propylene carbonate (PC) by coating graphite electrode foil with a layer of silver. Results from electrochemical impedance measurements show that the Ag-coated graphite electrode presents lower charge transfer resistance and faster diffusion of lithium ions in comparison with the virginal one. Cyclic voltammograms and discharge-charge measurements suggest that the decomposition of propylene carbonate and co-intercalation of solvated lithium ions are prevented, and lithium ions can reversibly intercalate into and deintercalate from the Ag-coated graphite electrode. These results indicate that Ag-coating is a good way to improve the electrochemical performance of graphitic carbon in PC-based electrolyte solutions.     

基于Kanai-Tajimi模型的地震作用荷载新型识别方法

目的研究一种识别地震作用荷载的方法,为地震作用荷载的识别与相应结构的动力特性、损伤的识别提供一种新的途径,进一步为结构的安全性、损伤进程和耐久性等研究提供理论参考.方法利用Kanai-Tajimi模型将单位强度白噪声过程模拟为未知的地震作用,并将其作用在结构上,然后根据数值模拟计算得到的结构体系响应作为观测量,采用Kalman滤波对未知荷载状态加以识别.结果最终可以利用结构的加速度响应反演得出地震作用的等效荷载,在人工添加5%观测噪声的条件下,最大误差率为7%左右,而在人工添加10%观测噪声的条件下,最大误差率为8%左右.结论通过算例的验证,说明笔者所采用的方法精度较高,获得了较好的识别效果.     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.     

Acquisition algorithm assisted by AGC control voltage for DSSS signals

An appropriate acquisition configuration in terms of signal quality can optimize the acquisition performance. In view of this, a new approach of acquisition assisted by the control voltage of automatic gain control(AGC) is proposed. This approach judges the signal power according to the AGC control voltage and switches the working modes correspondingly and adaptively. Non-coherent accumulation times and the detection threshold are reconfigured according to the working mode. Theoretical derivation and verification by simulation in typical situations are provided, and the algorithm is shown to be superior in terms of the mean acquisition time, especially in strong signal scenarios compared with the conventional algorithm.     

On the Survivability of Self-repairing Control System for a Hybrid Underwater Vehicle

A hybrid remotely operated underwater vehicle （HROV） capable of working to the full ocean depth has been developed. In order for the vehicle to achieve a certain survivability level, a self-repairing control system （SRCS） has been designed. It consists of two basic technologies, fault diagnosis and isolation （FDI） and reconfigurable control. For F＇DI, a model-based hierarchical fault diagnosis system is designed for the HROV. Then, control strategies which reconfigure the control system at intervals according to information from the FDI system are presented. Combining the two technologies, it can obtain the fundamental frame of SRCS for the HROV. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, an assessment of the HROV＇ s survivability is vitally needed before it enters operational service. This paper presents a new definition of survivability for underwater vehicles and develops a simple survivability model for the SRCS. As a result of survivability assessment for the SRCS, we are able to figure out the survivability of SRCS and make further optimization about it. The methodology developed herein is also applicable to other types of underwater vehicles.     

安徽中小企业发展现状及创新路径研究

近几年,在政府大力扶持之下,安徽中小企业快速发展,已成为推动经济持续、健康发展的重要力量,但在发展过程中也存在一些不容忽视的问题。本文从企业总量、地区分布、企业产值、所有制类型等方面对安徽中小企业进行调查,在此基础上分析安徽中小企业在发展过程中存在的问题,并提出相应的建议和对策,对丰富中小企业发展理论、制定安徽中小企业发展政策具有一定的意义。