A Jini service to reconstruct tomographic data

Distributed computing that uses dynamic networks will change the way we work and communicate thanks to the interaction of devices and services, that are automatically added and removed from the network as needed. The Jini technology, which is built atop the Java programming language, provides a homogenous view of the network and extends the ability of code to migrate in Java. This software design model simplifies the configuration and access to hardware devices and software services in a network. Thus, it becomes possible to execute new services without pre-installing software on client machines. This new programming paradigm is especially important in medical applications, where the reliable transmission of information is essential. This paper demonstrates how single photon emission computerized tomography data can be iteratively reconstructed using a Jini service.     

Analysis of Optical Losses in a Photoelectrochemical Cell: A Tool for Precise Absorptance Estimation

Optical losses in a photoelectrochemical (PEC) cell account for a substantial part of solar‐to‐hydrogen conversion losses, but limited attention is paid to the detailed investigation of optical losses in PEC cells. In this work, an optical model of combined coherent and incoherent light propagation in all layers of the PEC cell based on spectroscopic measurements is presented. Specifically, photoelectrodes using transparent conductive substrates such as F:SnO₂ coated with thin absorber films are focused. The optical model is verified for hematite photoanodes fabricated by atomic layer deposition and successfully used to determine wavelength‐dependent reflection, transmission, layer absorptances, and charge generation rates. Furthermore, the calculated absorptances enable 20–30% more accurate calculations of the absorbed photon‐to‐current efficiency of PEC cells. Our optical model is a powerful tool for the optimization of the optical performance of PEC cells focusing on single absorber or tandem configurations and represents a cornerstone of a complete (optical and electrical) model for PEC water splitting cells.     

Mismatch Modeling and Simulation—A Comprehensive Approach

This article describes a comprehensive approach to mismatch simulation and modeling as needed for integrated circuit design. Local device mismatch as well as global process variations and parameter correlations are regarded. A method for mismatch modeling based on spatial frequencies is described, which enables to overcome insufficiencies of the first order models. Measurement results are presented to demonstrate the achieved modeling precision. All models and methods mentioned here are commercially available in the simulation tool GAME (General Analysis of Mismatch Effects) which is used in the semiconductor industry since 1998.     

Unraveling the Reasons for Efficiency Loss in Perovskite Solar Cells

The effect of the presence of unreacted PbI₂ on the perovskite solar cells efficiency is reported. N,N‐Dimethylformamide vapor treatment is introduced to study the influence of complete conversion to a power conversion efficiency of the device. It is discovered that the optimized morphology of the PbI₂ under layer is essential to form a dense perovskite layer preventing recombination by direct contact between TiO₂ and a hole transporting layer, and to increase the charge collection efficiency. The present findings provide an insight into the morphology and growth mechanism of perovskite layer, the correlation between the device performance, and the film deposition process.     

A “four-ferrocene” modified stem-loop structure as a probe for sensitive detection and single-base mismatch discrimination of DNA

We report the use of a four-ferrocene modified oligonucleotide as a probe for DNA detection with a gold electrode microsystem. This oligonucleotide is synthesized by automated solid-phase synthesis with four successive ferrocene moieties at the 5′-end and a C6-thiol modifier group at the 3′-end. The grafting of this 4Fc-DNA probe on a gold electrode microsystem results in the appearance of the ferrocene redox couple in cyclic voltammetry. The probe sequence is a stem-loop structure that folds efficiently on the electrode, thus optimizing electron transfer. Such architecture serves as sensor for DNA detection which is based on hybridization. The resulting disposable voltammetric sensor allowed direct, reagentless DNA detection in a small volume (20 μL). Electrochemical response upon hybridization with complementary short sequence (30-base length) and long sequence (50-base length) strands was observed by differential pulse voltammetry. Current variations were compared. The longer the sequence, the greater the decrease in current. The system's detection limit was estimated at 3.5 pM (0.07 fmol in 20 μL) with the 50-base length target and provided a dynamic detection range between 3.5 pM and 5 nM. Single mismatch detection showed a good level of sensitivity. The system was regenerated twice with no significant loss of Fc signal. Finally, 1 pM sensitivity was reached with a long chain analog of DNA PCR products of Influenza virus.     

Compressive and Tensile Behaviours of PLLA Matrix Composites Reinforced with Randomly Dispersed Flax Fibres

Nowadays, the ecological footprint of a material is becoming tremendously important. The Poly l-Lactide Acid (PLLA) matrix composites reinforced by randomly scattered flax fibres have mechanical properties similar to polyester/glass composites [1], lower environmental impacts and can be compost at the end of their lives. In this study, the mechanical characterization of biocomposites has been pushed further with the determination of the compressive and tensile properties. Furthermore, the mechanical properties of single flax fibres have been measured and implemented in a micro-mechanical estimation of the composite elastic modulus. Tensile and compressive stiffness determined by the mechanical analyses show very good correlations with the mathematical estimation.     

Comparison of Cell Sizes for Cost Efficient Deployment of a Sensor Network Aided Cognitive Radio System

To exploit spectrum resources on a secondary basis, a Sensor Network Aided Cognitive Radio Network uses a wireless sensor network that assists a secondary cognitive radio network by providing information about the current primary spectrum occupancy. In this paper we determine the performance for different cell sizes when considering the costs for deployment of base stations in a secondary network that exploits spectrum holes identified by the wireless sensor network. The secondary base station is deployed co-located with a mobile primary network that uses a cellular reuse pattern with seven frequencies. Performance of the secondary system and impact on the primary system are mainly studied in terms of throughput, packet loss and coverage when using spectrum holes in the space, time and frequency domains. Especially, we find that the cell size and configured transmit powers for the secondary system are important for optimal system performance, and that smaller cell sizes and less expensive base stations for the secondary system are beneficial. The impact on primary system performance was found to be low, but that optimal tuning of the sensor network is important.     

Angiogenic potential of boron-containing bioactive glasses: in vitro study

Boron-containing bioactive glasses (BGs) are being extensively researched for the treatment and regeneration of bone defects because of their osteostimulatory and neovascularization potential. In this study, we report the effects of the ionic dissolution products (IDPs) of different boron-doped, borosilicate, and borate BG scaffolds on mouse bone marrow stromal cells in vitro, using an angiogenesis assay. Five different BG scaffolds of the system SiO₂–Na₂O–K₂O–MgO–CaO–P₂O₅–B₂O₃ (with varying amounts of SiO₂ and B₂O₃) were fabricated by the foam replication technique. Bone marrow stromal cells were cultivated in contact with the IDPs of the boron-containing BG scaffolds at different concentrations for 48 h. The expression and secretion of vascular endothelial growth factor (VEGF) from the cultured cells was measured quantitatively using the VEGF ELISA Kit. Cell viability and cell morphology were determined using WST-8 assay and H&E staining, respectively. The cellular response was found to be dependent on boron content and the B release profile from the glasses corresponded to the positive or negative biological activity of the BGs.     

Generalized Lorenz-Mie theory for a sphere with an eccentrically located spherical inclusion

Abstract

The theory of interaction between an arbitrary electromagnetic shaped beam and a sphere with an eccentrically located spherical inclusion is presented. This theory is built as a synthesis between two available theories (i) the generalized Lorenz-Mie theory for a homogeneous sphere (illuminated by an arbitrary shaped beam) and (ii) the theory of interaction between a plane wave and an eccentrically stratified dielectric sphere.