Application of ultraviolet photoelectron spectroscopy (UPS) in the surface characterisation of polycrystalline oxide catalysts. I. Methodics and analytical potential

Polycrystalline oxide surfaces have been investigated by a combination of photoemission and ion-scattering techniques (UPS, XPS, ISS) to assess the analytical potential of UPS for the surface characterisation of real polycrystalline oxide catalysts. UP spectra can be obtained from a number of binary and ternary oxides when the measurement is performed at appropriate temperatures in order to ensure sample conductivity sufficient to avoid surface charging. Where applicable, UPS provides enhanced surface sensitivity (as compared to XPS) and chemical sensitivity permitting the identification of surface structures and adsorbates. The benefit of enhanced surface sensitivity has been demonstrated by the detection of V⁴⁺ species in the outmost surface layer(s) of V₂O₅. The use of the chemical sensitivity for the identification of chemical compounds on a fingerprint basis has been shown by a study of bismuth molybdate surfaces. The chemical sensitivity with respect to adsorbates has been demonstrated by the detection of N-containing species formed in the interaction of V₂O₅ with NH₃.     

Development of chitosan/Spirulina bio‐blend films and its biosorption potential for dyes

Chitosan/Spirulina bio‐blends (CSBB) in films form were developed to be an alternative/renewable biosorbent, able to remove anionic and cationic dyes from aqueous solutions. CSBB potential as biosorbent was investigated for cationic dye Methylene Blue (MB), and anionic dyes Tartrazine Yellow (TY) and Reactive Black 5 (RB5). Chitosan and Spirulina samples were obtained and characterized, and CSBB films were prepared with different chitosan/Spirulina ratios. The CSBB films characteristics, as, mechanical properties, thermal profile, crystallinity, functional groups, morphology, and biosorption potential were strongly dependent of chitosan/Spirulina ratio. CSBB films preserved its mechanical structures at pH from 4.0 to 8.0. The biosorption capacities were 120, 110, and 100 mg g^?1 for RB5, TY, and MB, respectively. The increase of chitosan amount favored the TY and RB5 biosorption; however, the increase of Spirulina amount favored the MB biosorption. Thus, the CSBB in film form is a renewable biosorbent suitable to remove anionic and cationic dyes from aqueous solutions. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44580.     

Changes in Fatty Acid, Tocopherol and Xanthophyll Contents During the Development of Tunisian-Grown Pecan Nuts

Among oil compounds, fatty acids, tocopherols and xanthophylls (lutein and zeaxanthin) are of special interest due to their nutritional properties. The identification and quantification of these compounds in pecan nuts (Carya illinoinensis) could therefore be very useful to produce functional foods rich in compounds of this type. This paper reports studies on their accumulation and the effect of ripening on the content of these high value-added compounds. The total lipid content increased during the ripening. Saturated and polyunsaturated fatty acids decreased significantly, whereas, monounsaturated fatty acids increased during the ripening of pecan nut fruit. Maximum levels of total tocopherol (279.53 mg/kg oil) and xanthophyll (6.18 mg/kg oil) were detected at 20th weeks after the flowering date. These amounts decreased gradually as ripening advances. The early stages of pecan ripening seem to have nutritional and pharmaceutical interests. These results may be useful for evaluating the pecan nut quality and determining the optimal period when the pecans accumulated the maximum of these nutritional and healthy compounds.     

Monitoring and Origin of Polycyclic Aromatic Hydrocarbons (PAHs) in Effluents from a Surface Treatment Industry

ABSTRACT

In Europe, polycyclic aromatic hydrocarbons (PAHs) are a source of concern due to their toxic effects and are considered as priority pollutants by water authorities. In this study, we reported the results of qualitative and quantitative monitoring of 16 PAHs in effluents from a surface treatment industry to determine their origin. The results indicated that PAHs were present in the discharge waters at a concentration of 500 ng L^?1 (in average for the PAH sum). However, the further we returned to the start of the industrial process, the more the PAH concentrations increased. Indeed, the highest concentrations (>20,000 ng L^?1 for the PAH sum) were found in the degreasing baths – the first step in the part treatment. The final analyses showed that the PAHs came from the oils left on the metal parts by the suppliers. The important difference in concentrations between the upstream (first baths in the production line) and the downstream (discharge water) of the effluent showed that phenomena including dilution or potentially degradation occurred but that the major part of the PAHs tended to adsorb to sludge during the settling step in the effluent treatment plant.     

Mechanical Stress on Lysozyme Crystals during Dynamic Cross‐Flow Filtration

The influence of mechanical stress on the crystal size distribution of lysozyme crystal slurries in a dynamic cross‐flow device is discussed. The reduction of crystal size may have an influence on mass and resistance of the fouling layer. A filter test device with a filter area of 130 cm² is used for thickening. After thickening, a model impurity, namely bovine serum albumin, is washed out of the suspension. A reduction of crystal size due to stirring and a reduced fouling layer with increasing stirrer speed is observed. Furthermore, a higher stirring speed increases the specific filtrate flux. In the presence of the impurity, more crystal aggregates than single isometric crystals are formed and, hence, the decrease of crystal size due to shear forces is more pronounced than without impurity.     

Experimental Phase Diagram Determination and Thermodynamic Assessment of the CeO2‐Gd2O3‐CoO System

New phase diagram data and a thermodynamic assessment of the CeO‐Gd₂O₃‐CoO system using the CALPHAD approach are presented. This information is needed to understand the surprisingly low sintering temperature (950°C–1050°C) of CeO₂‐based materials doped with small amounts of transition metal oxide (e.g., CoO). Experimental phase equilibria between 1100°C and 1300°C are reported based on the analysis of annealed and molten samples. No isolated compound exists in the ternary. At 1300°C the Co solubility in the ternary compounds Ce_1?x?yGd_xCo_yO_2?x/2?y (fluorite) is 2.7 mol% and is less than 1 mol% in the Gd_2?xCe_xO_3+x/2 (bixbyite). The Ce solubility in the perovskite GdCoO_3?δ was found to be 1 mol%. The lowest temperature eutectic melt in the ternary has a composition of 57.2 mol% Co and 41.1 mol% Gd melting at an onset temperature of 1303 ± 5°C, which is close to the binary eutectic in the Gd₂O₃‐CoO system at 60 ± 2 mol% Co and 1348 ± 1°C.     

Preparation of chitosan‐based adhesives and assessment of their mechanical properties

The aim of this study is to develop chitosan‐based adhesives and to characterize their shear strength. The desirable features of such adhesives are biodegradability, biocompatibility, non‐toxicity, and anti‐microbial properties. Various eco‐friendly polyanionic polysaccharides, acids, and plasticizers, in single or multiple formulations, were associated with chitosan. The resulting crosslinked polymers were glued on some chemically treated aluminum adherends. The shear strength of these formulations was measured with the “double lap‐joint” bonding method, as it features a low‐peeling effect. The shear strength of 40.8 MPa obtained for formulations containing chitosan and glycerol plasticizer was the most significant finding in this study. This value is equivalent to that obtained with a synthetic adhesive used in industry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Ribosome display of mammalian receptor domains

Many mammalian receptor domains, among them a large number of potential therapeutic target proteins, are highly aggregation-prone upon heterologous expression in bacteria. This severely limits functional studies of such receptor domains and also their engineering towards improved properties. One of these proteins is the Nogoreceptor, which plays a central role in mediating the inhibition of axon growth and functional recovery after injury of the adult mammalian central nervous system. We show here that the ligand binding domain of the Nogoreceptor folds to an active conformation in ternary ribosomal complexes, as formed in ribosome display. In these complexes the receptor is still connected, via a C-terminal tether, to the peptidyl tRNA in the ribosome and the mRNA also stays connected. The ribosome prevents aggregation of the protein, which aggregates as soon as the release from the ribosome is triggered. In contrast, no active receptor was observed in phage display, where aggregation appears to prevent incorporation of the protein into the phage coat. This strategy sets the stage for rapidly studying defined mutations of such aggregation-prone receptors in vitro and to improve their properties by in vitro evolution using the ribosome display technology.