高效能空气净化器评价技术要求国家标准研究

本文论述了编制高效能空气净化器产品评价技术要求国家标准的意义和作用,介绍了标准研制的总体思路和原则,高效能空气净化器的定性和定量评价指标要求,测试、计算和评价方法等,通过国标的研制与实施,将引领并促进高效能空气净化器产品的生产与应用.     

Monitoring the Dynamic Process of Formation of Plasmonic Molecular Junctions during Single Nanoparticle Collisions

The capability to study the dynamic formation of plasmonic molecular junction is of fundamental importance, and it will provide new insights into molecular electronics/plasmonics, single‐entity electrochemistry, and nanooptoelectronics. Here, a facile method to form plasmonic molecular junctions is reported by utilizing single gold nanoparticle (NP) collision events at a highly curved gold nanoelectrode modified with a self‐assembled monolayer. By using time‐resolved electrochemical current measurement and surface‐enhanced Raman scattering spectroscopy, the current changes and the evolution of interfacial chemical bonding are successfully observed in the newly formed molecular tunnel junctions during and after the gold NP “hit‐n‐stay” and “hit‐n‐run” collision events. The results lead to an in‐depth understanding of the single NP motion and the associated molecular level changes during the formation of the plasmonic molecular junctions in a single NP collision event. This method also provides a new platform to study molecular changes at the single molecule level during electron transport in a dynamic molecular tunnel junction.     

智能耳诊机的软、硬件设计

本文从实际应用出发,详尽论述了“智能耳诊机”软、硬件设计的方法。对从事单片机开发应用的工程技术人员有较高的参考价值。     

Growth technique for producing high quality superconducting YBa2Cu3O7-δ single crystals

High quality single crystals of YBa₂Cu₃O_7- (YBCO) have been grown in yttria-stabilized zirconia crucibles by using a flux method. This method yields crystals with area 3 to 4 times larger than a previous method, and 3 to 5 times more crystals. Several crystals as large as 3×4mm² in thea-b plane are routinely obtained from each crucible. The samples typically range from 10 to 60 m thick. The superconductivity transition temperatureT _c of the crystals, measured by magnetic susceptibility, falls in the range 92.5 to 93 K and the smallest transition width (10 to 90%) is less than 0.25 K. Compared with the previous method, the surface is generally smoother, with less flux, and larger untwinned regions of 1 x 1 mm² are usually found.     

基于范畴论的多TBox整合研究

在语义Web环境下,单一和分散的知识库会引发数据的冗余和不一致性,且严重影响知识库智能化查询,降低知识库中数据的重用性和可操作性.文中提出一种基于范畴论的多TBox整合方法来整合知识库,旨在解决上述者类问题.此方法具有高度抽象性和强大表达能力的范畴论是多知识库整合的理想工具.将TBox作为操作对象,范畴论中"态射"功能可实现TBox的映射,"外推"功能可实现TBox的整合,最后通过实验验证方法的可行性和有效性,实验结果基本符合要求.     

SZ绞成缆设备电控系统的构成及变频器故障分析

SZ绞设备是将单元绞制和缆芯绞制在一道工序完成的一种专业电缆生产设备。SZ绞设备采用了先进的变频调速技术和PLC控制技术,有的还采用了伺服驱动,使其控制快速、精确和可靠。本文就SZ绞设备的电控系统构成及在调试运行中遇到的变频器故障进行了分析。     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.