Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

单桩腿有限元分析

为保证桩腿在冬季冰区海域的安全使用,对桩腿结构进行冰载荷作用下的强度分析。应用ANSYS软件建立桩腿、地基、冰相互作用的仿真计算模型,实现桩腿的力学分析。对桩腿进行了强度校核,计算出冰载荷作用下桩腿的变形及其应力状态。计算结果表明,桩腿在此冰载荷作用下强度满足安全要求。     

工程化学基础课程的改革与实践

文中介绍了工程化学基础课程改革思想的提出，在教改过程中通过遴选合适的教材、修订教学大纲，建全教学文件、适当运用现代化教学手段和积极进行师资队伍建设等改革方案的实施，在教学实践中适应科技发展，培养工程概念，增强环保和经济意识，及时更新教学内容，提高教学质量。     

多线程编程技术实现经典进程同步问题

介绍了Windows环境下进行多线程编程的意义，重点讨论了C＋＋Builder环境下开发多线程应用程序这一问题。并通过实现生产者-消费者问题、读者-写者问题、哲学家共餐问题等经典进程同步问题使人们更好地理解同步概念及其实现方法。     

一种新型特级防火卷帘的研究与开发——3J特级防火卷帘

介绍3J特级防火卷帘的各种重要功能特点,讨论其实用性与易用性以及推广该产品的必要性与可行性。     

高自燃倾向采面遇构造带的安全对策

通过两种改造方案的对比分析,为高自燃倾向采煤工作面遇构造带时的处理提供经验。     

陶瓷材料冲击性能研究进展

陶瓷材料由于其多种优良特性得到了越来越广泛的应用。有关陶瓷材料的冲击力学性能研究是最近几十年才开始的。本文从陶瓷材料的应变率效应、冲击下的高压行为、冲击损伤、层裂现象和失效波响应，以及相关的理论研究和数值分析等方面，介绍了国内外对陶瓷材料冲击性能研究的现状，并对进一步的工作提出了建议和展望。     

坨五站中间乳化层快速增长原因及治理方案

胜利采油厂坨五站高含水(95％)原油化学预脱水中，二级沉降罐内油水相之间的中间乳化层增长迅速，引起了一系列问题。现场调查和大量室内测试结果表明，产生这一现象的原因有：油溶性破乳剂WD-1加入点不合理。有2／3的含水原油在通过油水分离器之后才与破乳剂混合；二级沉降罐进油口伸入油相内，油流的冲击达不到中间层；WD-1对坨五站混合原油中的稠油破乳脱水性能欠佳，不能适应坨五站混合原油组成和含水的变化。针对上述各种原因筛选出了性能更好的一种破乳剂1916。根据确定的几种原因采取了相应的措施：将破乳剂加入点改在3个并联油水分离器之前；将二级沉降罐的进油口移到水相内；改用筛选出的破乳剂1916，结果使中间乳化层的增长受到了抑制。图2表4参2。     

Architectural Control of Hierarchical Nanobelt Superstructures in Catanionic Reverse Micelles

BaXO₄ (X = Mo, W) nanobelts and a variety of hierarchical superstructures assembled from the nanobelts have been synthesized in a catanionic reverse‐micelle system. The effects of various factors, such as the mixing ratio (r) between the anionic and cationic surfactants, the temperature, and the presence of polymeric additives, on the formation of the nanobelts and their hierarchical assembly have been examined in detail. In particular, r has been shown to be powerful in modulating the formation and assembly of the BaMoO₄ and BaWO₄ nanobelts. Architectural control of the penniform nanobelt superstructures has been readily achieved by changing the experimental parameters. A plausible two‐stage growth mechanism has been proposed for the formation of penniform BaXO₄ nanobelt superstructures in catanionic reverse micelles.