Evidence of High Vertical Wave-Number Behavior in a Continuously Stratified Reservoir: Boadella, Spain

High vertical wave-number modes clearly dominate the internal wave field during the stratification period in Boadella reservoir in northeast Spain. In this period, the extraction of hypolimnetic water, due to summer irrigation, brought the surface level down by 6 m in one month and the epilimnetic water progressively occupied the whole water column. The temperature profile, with the exception of a few meters at the surface layer, presented an almost constant temperature gradient of about 0.7°C/m. The period of the main vertical mode is 24 h with an amplitude of around 1 m. Thermistor chain records and meteorological data allow us to deduce that this mode is, at least, a third vertical mode forced by the wind, which normally has a typical periodicity of 24 h. However, when the wind changes direction from south to north, the circulation cells developed due to this forced nonstationary oscillation are destroyed. When this occurs, the Bulk Richardson number is Rib ～ 1. Similar vertical structures as a response to wind forcing should be expected in similar systems, although this has not been reported in the literature.     

Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

Sintering studies of nano-crystalline zinc oxide

Sintering and grain growth of nano-crystalline undoped ZnO has been studied in detail over a wide range of temperature and holding time. Below 800 °C, sintering of over 70% theoretical density is not observed, irrespective of particle size. At 900 °C for 6 h, the nano-crystalline sample sinters to 99% of theoretical density whereas the density for as received sample is 93% of theoretical density. However, at 1300 °C or higher, the densification is found to be much faster and after a few hours becomes independent of holding time. Grain growth studies reveal a similar feature of attaining saturation over holding time. The average saturated grain size is found to be ∼1.5 and ∼2.2 μm at 800 and 900 °C, respectively, while at 1300 °C or higher, it is in between 12 and 13 μm.     

Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000

This paper uses three recently generated southern African satellite burned area products for the month of September 2000 in a sensitivity study of regional biomass burning emissions for a number of trace gases and particulates. Differences in the extent and location of areas burned among products generated from Moderate Resolution Imaging Spectroradiometer (MODIS), Systeme Pour l'Observation de la Terre (SPOT-VEGETATION), and Along Track Scanning Radiometer (ATSR-2) data are significant and result in different emissions estimates for woodland and grassland land cover types. Due to the different emission profiles in woodlands and grasslands, favoring relatively more products of incomplete combustion in woodlands compared with products of complete combustion in grasslands in the late dry season, these changes are not proportional to the differences in the burned area amounts. The importance of accurate burned area information not just in terms of the total area but also in terms of its spatial distribution becomes apparent from our modeling results. This paper highlights the urgent need for satellite data producers to provide accuracy assessments associated with satellite-derived products. Preferably, these accuracy data will be spatially explicit, or defined in a way that can be applied in a spatially explicit modeling context, to enable emissions uncertainties to be defined with respect to different landscape units in support of greenhouse gas emissions reporting.     

A family of lower- and higher-order transversal linearization techniques in non-linear stochastic engineering dynamics

Sample pathwise numerical integration of noise-driven engineering dynamical systems cannot generally be performed beyond a limited level of accuracy, especially when the noise processes are modelled using (filtered) white noises. Recently, a locally transversal linearization (LTL) strategy has been proposed by the author (Proc Roy Soc London A 2001; 457 :539–566) for direct integration of deterministic and stochastic non-linear dynamical systems. The present effort is focussed on a host of extensions along with detailed theoretical error analyses of the linearization approach, especially as applied to problems in non-linear stochastic engineering dynamics. Thus, to begin with, estimates of local and global error orders in the basic LTL scheme are obtained separately for the displacement and velocity vectors when the system is driven either by a set of additive noises or by an arbitrary combination of (independently evolving) additive and multiplicative noises. Following this, a new family of higher-order LTL schemes is proposed in order to improve upon the basic LTL method and the associated error orders are established. A stepwise implementation of the lower- and higher-order versions of the LTL method, along with certain computational aspects, is also outlined. The proposed schemes are numerically illustrated, to a limited extent, for a single degree-of-freedom (SDOF) and a two degree-of-freedom (TDOF) non-linear engineering systems under additive and/or multiplicative white noise excitations. Copyright © 2004 John Wiley & Sons, Ltd.     

Field observations on the occurrence of new indicators of disinfection efficiency

This paper summarizes studies on the presence of acid-fast and yeast organisms in wastewater and water treatment plants and in surface water. These organisms were found to satisfy three of Bonde's criteria for indicator organisms: presence whenever pathogens are likely to be present; resistance at least equal to that of pathogens; and lack of regrowth in the post-treatment environment. This, plus prior data, indicates that these organisms are at least as acceptable as indicators of disinfection efficiency than the coliform group.     

A dynamic programming method for building free algebras

We are interested in deciding if a given nonassociative polynomial h is an identity for a variety of nonassociative algebras. We present an algorithm for constructing a certain homomorphic image of a free nonassociative algebra which is sufficient to answer the question. The algorithm resembles dynamic programming in that the algebra is built by constructing a sequence of subspaces; the basis of each subspace is determined by the basis of previous subspaces. The number of arithmetic operations required to construct the algebra is bounded by a polynomial in the degree of h and the dimension of the resulting algebra.