The Performance of Independent Active SMEs in French Competitiveness Clusters

This article analyses the evolution of independent members of French independent competitiveness clusters. It compares small and medium-sized enterprises (SMEs) that participated in collaborative research projects, funded by French competitiveness clusters, against similar control companies that were not part of such projects and not funded by the policy, over the period 2005–2013. French competitiveness clusters seek to enhance SMEs’ size, performance, innovation and employment; the current study therefore assesses their outcomes in terms of capital invested and equity returns. The findings from a difference-in-differences analysis reveal that sales, employment, R&D investments, and value added all increase in relative terms, but financial returns exhibit significant relative decreases for the smallest companies, whereas larger firms record strong increases. The inability of the smallest SMEs to reap gains from their cluster membership should be a matter of great concern to both companies and policy-makers.     

5-Axis tool path smoothing based on drive constraints

In high speed machining, the real feedrate is often lower than the programmed one. This reduction of the feedrate is mainly due to the physical limits of the drives, and affects machining time as well as the quality of the machined surface. Indeed, if the tool path presents sharp geometrical variations the feedrate has to be decreased to respect the drive constraints in terms of velocity, acceleration and jerk. Thus, the aim of this paper is to smooth 5-axis tool paths in order to maximize the real feedrate and to reduce the machining time.Velocity, acceleration and jerk limits of each drive allow to compute an evaluation of the maximum reachable feedrate which is then used to localize the areas where the tool path has to be smoothed. So starting from a given tool path, the proposed algorithm iteratively smoothes the joint motions in order to raise the real feedrate. This algorithm has been tested in 5-axis end milling of an airfoil and in flank milling of an impeller for which a N-buffer algorithm is used to control the geometrical deviations. An important reduction of the measured machining time is demonstrated in both examples.     

Study of the effects of structural uncertainties on a fractional system of the first kind – application in vibration isolation with the CRONE suspension

In this paper, we deal with the effects of the uncertainties on a fractional system of the first kind, mainly on the frequency-domain and the time-domain responses. For the structural uncertainties, two main aspects are studied: the nonlinearities of the physical components used to realize the fractional system and the consideration of the previously neglected dynamics of the system. Both uncertainties are introduced for the hydropneumatic CRONE suspension, previously synthesized and realized without taking into consideration these uncertainties. So, the novel approach treated in this work is to find whether the uncertainties, which were previously neglected in the synthesis and the realization phases, alter the behaviour of the system or not. The results show that the fractional order system behaviour is not affected.     

Immobilised yeast grape must deacidification in a recycle fixed bed reactor

Maloalcoholic fermentation (MAF) of grape must by Schizosaccharomyces pombe immobilised in calcium‐alginate double‐layer beads (ProMalic^®) was studied in Erlenmeyer flasks and in a total recycle fixed‐bed reactor operating in batch mode. The reaction is pseudo‐first order with respect to l ‐malic acid and under similar conditions deacidification is faster in the recycle reactor. This was attributed to mass transfer limitations which were confirmed in the recycle reactor by studying the influence of yeast load on the rate of MAF. Mass transfer limitations are also responsible for the lower activation energy of fermentation with the immobilised yeast (67 ± 9 kJ mol^?1) in comparison with the free cells (126 ± 19 kJ mol^?1). Alcoholic fermentation and MAF were performed simultaneously, both in the recycle reactor and in the industrial trials, confirming the efficacy of immobilised S. pombe to reduce grape must acidity without interfering with the main fermentation. Altogether, the present results are useful for the scale‐up of a recycle reactor to process large volumes of grape must.     

HIx system thermodynamic model for hydrogen production by the Sulfur–Iodine cycle

The HI_x ternary system (H₂O–HI–I₂) is the latent source of hydrogen for the Sulfur–Iodine thermo-chemical cycle. After analysis of the literature data and models, a homogeneous approach with the Peng–Robinson equation of state used for both the vapor and liquid phase fugacity calculations is proposed for the first time to describe the phase equilibrium of this system. The MHV2 mixing rule is used, with UNIQUAC activity coefficient model combined with of hydrogen iodide solvation by water. This approach is theoretically consistent for HI_x separation processes operating above HI critical temperature. Model estimation is done on selected literature vapor–liquid, liquid–liquid, vapor–liquid–liquid and solid–liquid equilibrium data for the ternary system and the three binaries subsystems. Validation is done on the remaining literature data. Results agree well with the published data, but more experimental effort is needed to improve modeling of the HI_x system.     

Diffusion Coefficient Measurements Under Reduced Gravity Conditions by Means of the Shear Cell Technique. The Impact of Free Surfaces

A recent computational methodology is applied here in order to analyze the impact of free surfaces on the measurement of the interdiffusion coefficients if shear cells are used. Calculations indicate that the above-mentioned impact depends on the intensity of the solutal Marangoni convection but mainly on the number of active Marangoni segments, that is to say, on the extent of the free surface considered. Bulk solutal convection due to reduced gravity levels is not relevant if the gravity vector acts orthogonally to the gradient of concentration.     

Bunsen section thermodynamic model for hydrogen production by the sulfur–iodine cycle

A model for the Bunsen section of the Sulfur–Iodine thermo-chemical cycle is proposed, where sulfur dioxide reacts with excess water and iodine to produce two demixing liquid aqueous phases (H₂SO₄ rich and HI rich) in equilibrium. Considering the mild temperature and pressure conditions, the UNIQUAC activity coefficient model combined with Engels' solvation model is used. The complete model is discussed, with HI solvation by water and by iodine as well as H₂SO₄ solvation by water, leading to a very high complexity with almost hundred parameters to be estimated from experimental data. Taking into account the water excess, a successful reduced model with only 15 parameters is proposed after defining new apparent species. Acids total dissociation and total H⁺ solvation by water are the main assumptions. Results show a good agreement with published experimental data between 25 °C and 120 °C.     

“Tropicalisation” of Feed-in Tariffs: A custom-made support scheme for hybrid PV/diesel systems in isolated regions

The interest and actions towards introducing renewables for off-grid regions has increased due to their ostensible cost-effectiveness, eco-friendliness and quality services provided. Nevertheless, in many isolated areas diesel generators appear as a common option, confirming that there is a need for financial support mechanisms that aid the introduction of renewables due to their higher initial investment costs.This paper proposes a so-called ‘tropicalisation’ of the Feed-in Tariff scheme to promote the introduction of hybrid systems in isolated communities based on the idea of awarding for each kWh produced by renewable energies a premium value during a guaranteed period of time. The proposed Renewable Energy Premium Tariff (RPT) scheme is an alternative mechanism to the usual initial investment donation for off-grid energy development projects by recognising the production of renewable electricity and opting for a long-term sustainability of the projects. Ecuador presents ideal conditions to study the introduction of such a ‘tropicalised’ scheme since a Feed-in Law including off-grid projects was established in 2002 and since there are governmental and local efforts for the introduction of renewable hybrids in isolated regions.Modelling of the introduction of photovoltaics (PVs) into diesel systems for several mini-grids located in isolated regions of Ecuador has been performed, and included a detailed financial analysis for optimisation of RPT values and a comparison with existing stand-alone diesel systems. The results show the cost-effectiveness of PV/diesel hybrids over diesel gensets, taking into account present and future diesel prices. To obtain long-term sustainability of the project, the RPT values are set at 0.70–1.20$ kWh covering the operability of the whole system for 20 years, where the renewable fraction should have the largest share in the hybrid system. The proposed mechanism is expected to aid the introduction of renewable technologies to bring solutions and sustainable energy options to final users of off-grid isolated regions.     

Improvement of epoxy thermosets using a thiol‐ene based polyester hyperbranched polymer as modifier

The anionic curing initiated by 1‐methyl imidazole of diglycidyl ether of bisphenol A with a hyperbranched polymer (HBP) containing long aliphatic chains in the structure were studied. The hydroxyl groups present as chain ends in the HBP structure played an important role in the curing kinetics, as demonstrated by differential scanning calorimetry, Fourier transform infrared spectroscopy and rheological studies. Properties such as shrinkage on curing and thermomechanical characteristics were also investigated. The structure of the HBP, which contains long aliphatic chains and reactive hydroxyl groups as chain ends, flexibilizes the network significantly, improving the impact resistance without notably affecting either the glass transition temperature or the microhardness of the modified thermosets. Copyright © 2012 Society of Chemical Industry