Information Population of an Integrated Construction Management System

This paper discusses the future requirements of integrated construction management systems and the need to support the management of large volumes of information on several levels. The solution proposes a combination of an efficient user interface and methods to partially automate the creation of the required information through access to stored information from past projects. The research follows the path being established for integrated construction management systems that rely on a standard representation of the industry's information requirements. By exploring the comprehensive aspects of construction planning for an integrated construction management system, the research demonstrates the usefulness of applying sound information representation structures. Through the application of case-based reasoning, the research advances the concepts of planning tools as they apply to integrated systems. The resulting prototype construction management system has the primary characteristic of assisting the user in the manipulation of information in order to generate the initial information requirements of an integrated construction management system.     

Control of free-radical emulsion polymerization of methyl methacrylate by oxygen injection. II. Experimental study

Oxygen injection has been proposed and experimentally demonstrated as an effective control measure for limiting the rate of heat release and altering the rate of polymerization in emulsion processes. A detailed mathematical model has been previously developed to describe the system behavior with and without oxygen injection. A simple lab scale apparatus was constructed and run extensively. Only trace quantities of oxygen are needed to inhibit the reaction completely. The facile response makes this method attractive for fast temperature control. However, because of the rapid penetration of dissolved oxygen into the polymer particles, growing radical chains are terminated prematurely, lowering product molecular weights. To minimize this detrimental effect, pulsed oxygen control is used and extensive experimental work was performed to determine the effects of controller set points on molecular weight. Moderate oxygen flows and moderate set point temperatures are found to give the optimal response without significant lowering of the final molecular weight. Injected quantities agree well with the order-of-magnitude sparging calculations needed to completely stop initiation. However, complete agreement between model simulations and experimental results was not reached due to an unmeasured loss of monomer from the reactor. Chain transfer to monomer is found to be important in modeling the polymer molecular weight. It has, however, a negligible effect on the reaction rate.     

Evaluating and monitoring nucleation and growth in copper foil

The electrodeposition of copper foil for use in electronic materials applications is a complex and demanding process. The specific aspects of producing and controlling the structure-property-performance requirements of the foil are important because of the stringent demands placed on their use in printed circuit boards and similar products. In this paper, a brief review of the electrodeposition process for raw copper foil is presented. Since electrolyte additives play such a significant role in the copper-depositionprocess, the effects of two essential additives, chloride ion and an organic (e.g., glue or gelatine), on the foil are described. Also, the influence of other operating parameters on the initial nucleation, growth, and subsequent electrocrystallization are discussed. Selected characterization methods, such as polarization and scanning electron micrography techniques, are described as a means of monitoring the process, but universally accepted methods of evaluating and controlling the additives and foil quality during electrolysis are still being sought.     

Buchbesprechungen

Ohne Zusammenfassung     

Resistance to Fracture of a Partially Stabilized Zirconia/β-Alumina Composite

Partially stabilized zirconia (PSZ) /β-alumina composites exhibit extensive non-elastic deformation during fracture. Repeated loading/stable fracture/unloading experiments were performed on chevron-notched four-point-bend specimens of the composite and pure PSZ. The energy consumption during the propagation of long cracks in the composite (∼500 J/m²) is 1 order of magnitude larger than for PSZ (∼50 J/m²). Breaking strengths of 127 MPa were obtained with a Weibull modulus of 43.     

Silver impregnation applied to striated muscle: The sarcoplasmic reticulum

The classical black reaction developed by Camillo Golgi is shown to impregnate the tubules and fenestrations of the sarcoplasmic reticulum (SR) in striated muscle. This is a double impregnation of chromate and silver, which usually fills extracellular spaces. The method is difficult insofar as long incubation times are required, and location of the successfully “stained” SR in plastic-embedded tissue blocks is unpredictable. The light microscope is absolutely necessary to find the good regions which can then be cut from the blocks in 1-μm-thick sections and examined in the electron microscope. Stereo pairs give the best results since these resolve overlap problems common to thick sections. A variety of artifacts are illustrated which can help avoid erroneous interpretations. The Golgi-“stained” SR shows this elusive network with unsurpassed contrast and should benefit the morphological studies of muscle-membrane enthusiasts.     

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel

This paper presents the results of a study on the microstructural and microchemical variations in a multipass Gas Tungsten Arc weld (GTAW) of modified 9Cr-1Mo steel. The changes brought about in the steel due to the heating and cooling cycles during welding and the subsequent effects due to reheating effects during multipass welding are described. Detailed analytical transmission electron microscopy has been carried to study the type and composition of the primary and secondary phases in this steel. The systematic changes in microstructural parameters such as Prior Austenite Grain Size, martensite lath size, number density, size and microchemistry of carbides, have been understood based on the different transformations that the steel undergoes during the heating and cooling process. Based on the observed microstructure, an attempt has been made to identify distinct microstructural zones and possible thermal cycles experienced by different regions of the weldment.     

Parallel path consistency

Filtering algorithms are well accepted as a means of speeding up the solution of the consistent labeling problem (CLP). Despite the fact that path consistency does a better job of filtering than arc consistency, AC is still the preferred technique because it has a much lower time complexity. We are implementing parallel path consistency algorithms on multiprocessors and comparing their performance to the best sequential and parallel arc consistency algorithms.^(1,2) (See also work by Kerethoet al. ⁽³⁾ and Kasif⁽⁴⁾) Preliminary work has shown linear performance increases for parallelized path consistency and also shown that in many cases performance is significantly better than the theoretical worst case. These two results lead us to believe that parallel path consistency may be a superior filtering technique. Finally, we have implemented path consistency as an outer product computation and have obtained good results (e.g., linear speedup on a 64K-node Connection Machine 2).     

Comments on "Computer-Assisted Continuous Infusion of the Intravenous Analgesic Fentanyl During General Anesthesia?An Interactive System"

This communication shows an algorithm used in the drug infusion system discussed in a recent paper1 to be incorrect. The error is corrected, and a new algorithm is presented.