Enhanced Topology Error Processing via Optimal Measurement Design

Topology errors constitute one of the significant source of problems for today's state estimators. They may cause significant biases in state estimation solutions and may occasionally lead to divergence of the numerical solution algorithms. Existing methods of detecting and identifying topology errors rely on the measurement residuals which are in turn dependent on the measurement configuration and network topology. Hence, the capability to effectively process topology errors is closely linked to proper measurement design. In particular, detection of a topology error associated with a given branch may or may not be possible depending upon the existing measurement configuration. Hence, it is possible to efficiently improve the topology error processing capability for a given system by strategically placing few extra measurements. In this paper, a systematic procedure will be developed in order to accomplish this by using not only the traditional power flow and injection measurements but also the newly emerging phasor measurement units (PMUs). Numerical examples will be provided in order to illustrate the proposed measurement placement strategy.      

Particle distribution and interfacial reactions of Al–7%Si–10%B<Subscript>4</Subscript>C die casting composite

Aluminum–boron carbide particle reinforced composite is an advanced material which can be used in applications such as neutron-shielding components, aircraft, and aerospace structures. In the microstructural characterization of an Al–7%Si–10%B₄C die casting, attention is particularly focused on particle distribution and interface reaction products between B₄C particles and the aluminum matrix. The quantitative analysis results show that, in a cross-section of the cast part, more particles concentrate in the center and fewer particles are present in the wall regions. Moreover, some particle segregation bands have been observed. The mechanisms of the particle migration are proposed to describe the phenomenon. However, the average particle fraction in any cross-section of the cast part is almost the same. A barrier layer consisting of several sublayers was detected on the surface of B₄C particles. Using electron diffraction in selected areas, it is found that these sublayers are composed of Al₃BC crystals, TiB₂ crystals, Si crystals, and coarse stick-shaped TiB₂ particles. In addition, it is observed that Si plays an important role in the formation of a dense barrier layer. The barrier layer can limit B₄C decomposition and improve B₄C stability in the aluminum melt.     

ASS-1钻井完井液及其在DP35-1和CB1-1气井钻井中的应用

报道了鄂尔多斯盆地低压低渗气藏水平使用的事生物降解钻(完)井液ASS-1的组成和性能.其组分包括粒度适宜的碳酸钙粉(暂堵剂和加重剂),改性淀粉(可变形暂堵剂和降滤失剂),优质生物聚的(提黏切剂),pH调节剂,无荧光润滑剂DRH(加量1%)及防腐剂等,给出了基础配方.该钻(完)井液对岩心的伤害率约为5%(4种其他体系钻(完)井液的伤害率在21.9%～96.6%);经高压气体反向驱排后,伤害后岩心渗透率恢复率可由88%提高到92%;在≤110℃热滚16 h后黏度损失率＜50%;经过4次热滚(91℃×16 h),每次热滚后作适当维护处理,均可使变坏的性能恢复到要求值.该钻(完)井液用于水平段长800 m、地温83℃的DP35-1井和两分支水平段长各1500 m、地温91℃的CB1-1中,根据技术要求采用适当技术措施,在钻进中特别是CB1-1井长达4个月的钻进中,API滤失量＜5 mL,密度1.04～1.07 g/cm3,漏斗黏度41～53 s,塑性黏度10～15 mPa·s,屈服值6～18 Pa,两口井均顺利完钻且可裸眼完井.图5表4参2.     

五年来我国有色金属工业结构调整状况及对策建议

本文总结了近5年来我国有色金属工业结构调整和产业升级的基本情况,即中国有色金属工业集约化程度、技装备水平提高,生产成本下降,行业整体实力增强。而这些成绩的取得都有赖于国家积极的财政政策及“债转股”政策的推动,有赖于深化企业改革及发挥市场资源配置的作用等等。同时,针对对当前及今后有色金属工业结构调整和产业结构升级所面临的问题,提出了有关对策建议     

上海如何发展循环经济

上海是个资源匮乏、环境容量有限的大都市。随着经济的发展,资源需求和环境污染问题日益突出。如果继续走传统经济发展之路,只能削弱上海经济发展的后劲,阻碍上海可持续发展战略的实施。因此,研究如何发展循环经济,对于上海解决环境与发展的矛盾,增强国际竞争力都具有十分重要的意义。1 上海开展循环经济面临的形势 从国际形势看,许多发达国家正把发展循环经济、建立循环型社会,作为实现环境与经济协调发展的重要途径,并在循环经济的探索和实践中取得了显著的成效。如杜邦化学公司采用的3R制造法、丹麦卡伦堡生态工业区、德国生活垃     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

改造本钢265m2烧结机倒料线提高作业率

针对本钢 2× 2 65m2 烧结机成品矿输送流程设计不合理而导致的烧结机频繁停机 ,通过采取合理的改进措施 ,实现了不停机倒料线 ,有效地提高了烧结机作业率和烧结矿产量 ,同时 ,烧结矿质量也有所改善     

斜井前置液加砂技术现场应用

中原油田斜井(井斜20°)水力压裂过程中易产生多裂缝和存在严重弯曲摩阻,常出现早期脱砂现象。油、气井压裂后初期产量高,但递减快,稳产时间短(100d),累积产量少。针对这些问题研究了前置液加砂技术,现场应用结果表明,前置液中加入粉砂能有效控制压裂液滤失,降低储层伤害,实现裂缝深穿透,而且粉砂能支撑微裂缝,提高压裂效果;前置液加中砂能有效降低裂缝弯曲摩阻,提高施工成功率。应用该技术,中原油田斜井压裂成功率由初期的50%提高到95%以上,有效率88%,有效期延长了50d以上,应用效果显著。