Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Long-wavelength infrared photoinduced switching of a resonanttunneling diode using the intersubband transition

Voltage switching induced by long-wavelength infrared light from a CO₂ laser was observed using a double-barrier resonant tunneling diode (RTD) biased in the bistable region and the intersubband transition (IT) between the quantum confined states. Possible optoelectronic and all-optical switching applications involving hysteresis are proposed and discussed     

Circular core polarization-maintaining optical fibers withelliptical stress-induced cladding

The reproducible technology for producing high-birefringence fibers with stress-induced elliptical cladding and circular core is described. The authors have obtained fibers that have a birefringence of about (1-3) 10^-4, a mode coupling parameter of about (2-7) 10 ^-5 m^-1, and loss of less than 0.5 dB/km at 1.6 μm. The authors have found effects restricting the capability of test fibers to maintain the state of linear polarization     

Low cycle fatigue and creep behavior of recrystallized Molybdenum near room termperature

The deformation behavior of pure recrystallized molybdenum under cyclic and static loads was investigated in the temperature range between 30°C and 10O°C, for stress amplitudes between 100 MPa and 250 MPa and for static loads up to 200 MPa. The results show that in spite of the low test temperatures and stress levels the Mo material exhibits considerable plastic strains which depend sensitively on frequenez and small changes in temperature.The activation energy deduced for the static and dynamic deformation is less than 0.98 eV which indicates thermally activated processes, to be explained by a dislocation kink model as described in the literature. The low-temperature fatigue behavior appears strongly influenced by creep-fatigue interaction phenomena.     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

Cytokines and PGE2 modulate the phagocytic function of the beta-glucan receptor in macrophages

Under serum-free conditions the beta-glucan receptor of mouse macrophages mediates phagocytosis of beta-1,3-D-glucan-coated microbeads (diameter 2 microns). IFN-gamma increases the phagocytic function of the beta-glucan receptor in a dose-dependent manner, giving the plateau level at 100 U/ml. Maximum activity appears 9 h after addition of IFN-gamma to the cells. The effect disappears within 24 h. The effect of IFN-gamma may be a result of augmented receptor synthesis since treatment with cycloheximide reduces the phagocytosis. IL-1 also increases the phagocytic function of the beta-glucan receptor giving a dose-dependent response and with the plateau level reached at 10 U/ml. Maximum activity is found 4 h after addition of IL-1 to macrophages. The effect disappears within 24 h. TNF does not alter the phagocytic function of the beta-glucan receptor, but TNF together with IL-1 prolongs the effect of IL-1. PGE2 reduces the phagocytic function of the beta-glucan receptor. Maximum reduction is achieved with 8 ng/ml. Time-course studies show the lowest phagocytic activity 9 h after addition of PGE2 to the cells.     

Synthesis and biological studies on analogs of cyclolinopeptide A with a shortened peptide chain

Continuing our work on the immunosuppressive activity of cyclolinopeptide A (CLA), a cyclic nonapeptide of the sequence: c-(-Leu-Ile-Ile-Leu-Val-Pro-Pro-Phe-Phe), we synthesized a series of 6 linear analogs of CLA, successively shortened at the N-terminus of the peptide chain. Immunosuppressive activity of acetates as well as trifluoroacetates of these peptides was investigated using PFC (humoral immunity) and DTH (cellular immunity) tests. It was found that the immunosuppressive potency of the peptides examined diminishes with shortening of the peptide chain. Octapeptide I with the sequence Ile-Ile-Leu-Val-Pro-Pro-Phe-Phe was found to be the most active of the whole series. The immunosuppressive activity increased again for a tripeptide fragment of CLA of the sequence Pro-Phe-Phe. The immunosuppressive activity of octapeptide probably depends on the suppression of IL-1, IL-6 and TNF production by the cells involved in immune and inflammatory response.     

An automatic machine for bending a furniture fitting tie rod

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 8, pp. 31–32, August, 1992.