一种适用于降压DC-DC的改进型电流检测电路

基于电流模式控制能够较好地改善DC-DC的性能,设计一种适用于降压DC-DC的改进型电流检测电路,所提出的电流检测电路提高了电流感应的速度和精度。通过对电路的理论分析与设计,采用SMIC 0.18μm CMOS工艺模型,利用Cadence工具对电路进行仿真验证,所提出的电流检测电路在负载电流为50 mA~500 mA时都能够达到96%的效率以及小于40 ns的建立时间。在开关频率为2 MHz时,输入电压范围为2.5 V~4.2 V,所需电感值为4.7μH,电容值为10μF,输出电压纹波小于18 mV。     

Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction

Concretes containing different types of hybrid fibers at the same volume fraction (0.5%) were compared in terms of compressive, splitting tensile, and flexural properties. Three types of hybrid composites were constructed using fiber combinations of polypropylene (PP) and carbon, carbon and steel, and steel and PP fibers. Test results showed that the fibers, when used in a hybrid form, could result in superior composite performance compared to their individual fiber-reinforced concretes. Among the three types of hybrids, the carbon-steel combination gave concrete of the highest strength and flexural toughness because of the similar modulus and the synergistic interaction between the two reinforcing fibers.     

基于浏览器 /服务器的橡胶加工网络测控系统

通过对客户机／服务器模式和浏览器／服务器模式的比较，选择浏览器／服务器模式组建了基于Internt/Intranet的远程橡胶加工网络测控系统，并介绍了系统的开发模式、方法和注意事项。     

A genetic tango attack against the David–Prasad RFID ultra‐lightweight authentication protocol

Radio frequency identification (RFID) is a powerful technology that enables wireless information storage and control in an economical way. These properties have generated a wide range of applications in different areas. Due to economic and technological constrains, RFID devices are seriously limited, having small or even tiny computational capabilities. This issue is particularly challenging from the security point of view. Security protocols in RFID environments have to deal with strong computational limitations, and classical protocols cannot be used in this context. There have been several attempts to overcome these limitations in the form of new lightweight security protocols designed to be used in very constrained (sometimes called ultra‐lightweight) RFID environments. One of these proposals is the David–Prasad ultra‐lightweight authentication protocol. This protocol was successfully attacked using a cryptanalysis technique named Tango attack. The capacity of the attack depends on a set of boolean approximations. In this paper, we present an enhanced version of the Tango attack, named Genetic Tango attack, that uses Genetic Programming to design those approximations, easing the generation of automatic cryptanalysis and improving its power compared to a manually designed attack. Experimental results are given to illustrate the effectiveness of this new attack.     

细胞激动素Kinetin合成的改进

介绍了用糠胺与腺嘌呤在催化条件下反应合成细胞激动素kinetin,该法原料易得,反应条件温和,产品收率及纯度都较高。     

Discourse cues to deception in the case of multiple receivers

Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers.     

A minimal kinematic model for serial robot calibration using POE formula

Traditional methods based on the product of exponentials (POE) formula are parametrically continuous and complete for the calibration of the kinematic parameters of serial robots. However, these methods are not minimal due to the constraints of joint twists. This paper puts forward a new POE-based model, whose parameters are totally independent and conform to the formula of minimality. This is the first model that simultaneously satisfies the requirements of parametric continuity, completeness, and minimality with uniform and generic modeling rules. The proposed approach avoids the operations of normalization and orthogonalization which are necessary redundancy elimination steps with the traditional model. Simulations on a SCARA robot and experiments on an ABB IRB 120 robot prove that the new model outperforms in convergence, accuracy, and efficiency.     

利用粉煤灰生产混凝土多孔砖

介绍粉煤灰混凝土多孔砖生产的原材料选择、粉煤灰性能、混合料处理、坯体成型与养护等工艺技术及其利废节能的优越性.     

汽车用塑料注塑新技术的进展

综述了汽车用塑料的注射成型技术的进展，简单介绍了气体辅助注射成型(GAIM)、水辅助注射成型、熔芯注射成型、反应注射／增强反应注射(RIM／RRIM)成型等技术的特点、生产的汽车部件及最新动向。     

Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites

Solutions of rare earth modifier (RES) and epoxy chloropropane (ECP) grafting modification method were used for the surface treatment of aramid fiber. Tensile properties of both the aramid/epoxy composites and single fibers were tested. The effects of RES concentration on tensile properties of aramid/epoxy composites were investigated in detail to explore an optimum amount of rare earth elements in solution for modifying aramid fiber. The fracture surface morphologies of tensile specimens were observed and analyzed with the aid of SEM. The experimental results show that rare earth treatment is superior to ECP grafting treatment in promoting interfacial adhesion between the aramid fiber and epoxy matrix. Meanwhile, the tensile strengths of single fibers were almost not affected by RES treatment. The optimum performance is obtained when the content of rare earth elements is 0.5 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1037–1041, 2004