Aerodynamic performance analysis of trains on slope topography under crosswinds

This work used the computational fluid dynamics method combined with full-scale train tests to analyze the train aerodynamic performance on special slope topography. Results show that with the increment in the slope gradient, the aerodynamic forces and moment increase sharply. Compared with the flat ground condition, the lateral force, lift force, and overturning moment of the train on the first line increase by 153.2%, 53.4% and 124.7%, respectively, under the slope gradient of 20°. However, with the increment of the windward side's depth, the windbreak effect is improved obviously. When the depth is equal to 10 m, compared with the 0 m, the lateral force, lift force and overturning moment of the train on the first line decrease by 70.9%, 77.0% and 70.6%,respectively. Through analyzing the influence of slope parameters on the aerodynamic performance of the train, the relationships among them are established. All these will provide a basic reference for enhancing train aerodynamic performances under different slope conditions and achieve reasonable train speeds for the operation safety in different wind environments.     

层间接触状态和横向力大小对车辙贡献率的影响

车辙贡献率是反映沥青路面各结构层车辙病害程度的一个主要参数,可用于指导沥青路面的设计和施工.利用三维有限元计算软件建立三维有限元模型用于理论分析,将有限元计算结果与理论解进行对比,验证了该三维有限元模型的可靠性.采用实测的轮胎接地压力,考虑不同层间接触状态和横向力大小,结合有限元计算的数据,分析了沥青路面结构层的车辙贡献率.结果表明:在层间完全连续状态下,横向力大小的选取不能简单地选取最大垂直轮胎接地压力的一定比例,而是要根据所研究的具体情况具体分析.在对沥青路面车辙贡献率的研究中,可以忽略层间接触状态,即假定层间完全连续.     

中国信息服务业空间集聚研究

通过产业集聚的EG指数对中国各省份信息服务业的空间集聚程度进行研究,得出集聚程度比较显著.在此基础上,找到这一服务业的两个相关指标,利用产业集中度CRn判断出信息服务业主要集中于北京、广东等六个地区,然后对两指标数据进行无量纲化处理,加权求和得到新的综合指标,最后对这一新指标进行了系统聚类分析,得知这一产业主要集中在北京和广东两个地区.     

《中德四季晨昏杂咏》（之八）的译文鉴赏

在诗歌翻译中,译文会因为译者的不同在风格上表现出差异.然而,译文的质量不外乎经受形美、音美和意美的考量.译者应从本国读者的文化背景上结合时代的脉搏来进行“再创造”,做到形式、音律和意蕴的完美统一.歌德的诗歌《中德四季晨昏杂咏》（之八）的四种中文译本各有特色,均在不同程度上实现了“三美”的融合.     

氧化鸡肉脂肪制备肉味香精前体物质的研究

研究以鸡肉脂肪为主要原料制备肉味香精的前体物质,通过单因素和正交试验确定氧化反应的最佳反应条件.结果表明氧化鸡肉脂肪的最佳条件是:氧化温度为120℃,氧化时间为3h,VE的添加量为1.0%,不添加水和NaCl.在最优条件下进行氧化试验,得到产物的酸值和过氧化值分别为1.472 mg/g和193.51 mmol/kg,感官评价值为4.905,具有典型特征的鸡肉香气.     

Degradability and biocompatibility of bioglass/poly(amino acid) composites with different surface bioactivity as bone repair materials

Bioglass (BG) possesses excellent bioactivity and has been widely used in the manufacture of biomaterials. In this study, a composite with different surface bioactivity was fabricated via in situ melting polymerization by incorporating BG and poly(amino acid) (PAA) at a suitable ratio. The structure of the composite was characterized by Fourier transform infrared spectroscopy and XRD. The compressive strength of the BG/PAA composites was 139 MPa (BG:PAA = 30:70). The BG/PAA composites were degradable, and higher BG in composite showed higher weight loss after 4 weeks of incubation in simulated body fluid. In addition, the BG/PAA composite maintained adequate residual compressive strength during the degradation period. The SEM results showed the differences in surface bioactivities of the composites directly, and 30BG/PAA composite showed thicker apatite layer and higher Ca/p than 15BG/PAA. in vitro MG-63 cell culture experiments showed that the composite was noncytotoxic and thus allows cells to adhere, proliferate, and differentiate. This indicates that the composite has good biocompatibility. The implantations in the bone defects of rabbits for 4 and 12 weeks were studied. The composites had good biocompatibility and were capable of guiding new bone formation without causing any inflammation. The composite may be successfully used in the development of bone implants.     

纳米金刚石的应用

纳米金刚石不仅具有金刚石所固有优异特性，而且还具有纳米材料所拥有的奇异性能。正是这些综合技术特性，使得它在传统的和新的技术领域中得到应用，并初见成效，本文从超精抛光、润滑、复合镀、磁性录音系统和医疗等方面的应用做了扼要的叙述，指出，纳米金刚石颗粒具有球形和准球形的特点，使得摩擦表面形成滚珠轴承效应，而表现出良好的润滑性，从而避免于摩现象的发生，而对一些主要因接触疲劳或高温磨损而失效的工件，纳米金刚石金属的复合涂层，则具有明显的优越性。     

激光熔覆含SiC金属陶瓷涂层显微组织特征

采用连续ＣＯ２激光器在钢表面进行熔覆含ＳｉＣ金属陶瓷涂层。对不同工艺条件下激光熔属层组织结构、成分与硬度进行了研究，对试验结果和凝固过程进行了传热分析。     

Research on graphite powders used for HTR-PM fuel elements

Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution, specific surface area, and shape characteristics. The graphite balls consist of proper mix-ratio of natural graphite, electrographite and phenolic resin were manufactured and characterized by thermal conductivity, anisotropy of thermal expansion, crush strength, and drop strength. Results show that some types of graphite powders possess very high purity, degree of graphitization, and sound size distribution and apparent density, which can serve for matrix graphite of HTR-PM. The graphite balls manufactured with reasonable mix-ratio of graphite powders and process method show very good properties. It is indicated that the properties of graphite balls can meet the design criterion of HTR-PM. We can provide a powerful candidate material for the future manufacture of HTR-PM fuel elements.