Studies on crystal morphology and crystallization kinetics of polypropylene filled with CaCO3 of different size and size distribution

Changes in the crystal morphology, crystallinity, and the melting temperature of thermoplastics resulted in significant changes in the mechanical behavior of composites containing them. For this reason, the research of crystal morphology and crystallization kinetics in thermoplastic composites became an important requirement. The thermoplastic filled with the filler of different size gradation was a new method for improving processability of thermoplastic composites. We have previously reported that the melt viscosity of polypropylene (PP) composites, which were filled with 30 wt % CaCO₃ of effective size gradation, could be evidently declined. In this study, two sizes of CaCO₃, 325 meshes and 1500 meshes, were blended by different proportions and filled into PP matrix with 30 wt %. Crystal morphology and isothermal crystallization kinetics of a series of composites were characterized by differential scanning calorimeter (DSC) and polarizing microscope. The results showed that composites filled with CaCO₃ of effective size gradation leaded to a well‐crystalline order and a large crystal size, while their isothermal crystallization kinetics and crystallization rate constant (k) were declined, and their Avrami exponents (n) and crystallization half‐life (t_1/2) were increased compared with the composites filled with single size CaCO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2437–2444, 2006     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Crosslink reaction of natural rubber with thiuram sulphur donors in the presence of a thiuram monosulfide

The vulcanization of natural rubber was studied with the sulfurating agents dipentamethylene thiuram tetrasulfide (DPTT) and tetramethylene thiuram disulfide (TMTD) in the presence of tetramethyl thiuram monosulfide (TMTM). This last accelerant affects the rate and efficiency of the vulcanization as well as the structures of crosslinks formed by the two sulphur donors. It may give rise to a polymerization between adjacent double bonds and generate a inhomogeneous crosslink distribution with an adverse effect on physical properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 491–499, 2002     

A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

Free radical grafting of glycidyl methacrylate onto polypropylene in a co-rotating twin screw extruder

Free radical grafting of glycidyl methacrylate (GMA) onto molten polypropylene (PP) was studied in a co-rotating twin screw extruder. Grafting yields of GMA obtained under various experimental conditions along the screw length allowed for a good appreciation of the effects of chemical parameters (the presence of styrene and the concentrations of peroxide and monomers) and those of processing parameters (feed rate, screw speed, and specific throughput). Similar to the results obtained in a batch mixer,¹ free radical grafting of GMA carried out in the extruder in the presence or absence of styrene proceeded rapidly, as it was virtually completed half-way down stream of the extruder. Additionally, the presence of styrene as a second monomer increased the GMA grafting yield reatly with reduced PP chain degradation. The ultimate GMA grafting yield increased with increasing concentration of peroxide, 1,3-bis(tert-butylperoxyisopropyl)benzene. This similarity between the batch mixer and the extruder is related to the fact that in both cases it is the concentration of the peroxide and its half lifetime that determine the grafting rate and the ultimate grafting yield. On the othe hand, the GMA grafting yield decreased with increasing screw speed or feed rate. For a particular specific throughput (the ratio of throughput to screw speed), an increase in throughput with a concomitant increase in screw speed brought about a decrease in GMA grafting yield. It was concluded that the GMA grafting yield is affected primarily by the residence time in the zone in which free radicals are not depleted. The effects of screw speed, feed rate, and specific throughput manifest mainly through this local residence time distribution. Specific energy is not a good measure of the performance of the extruder with respect to the free radical rafting of GMA onto PP. © 1995 John Wiley & Sons, Inc.     

Crystallization,morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends

Optically pure polylactides, poly(L ‐lactide) (PLLA) and poly(D ‐lactide) (PDLA), were blended across the range of compositions with poly(ε‐caprolactone) (PCL) to study their crystallization, morphology, and mechanical behavior. Differential scanning calorimetry and dynamic mechanical analysis (DMA) of the PLA/PCL blends showed two T_gs at positions close to the pure components revealing phase separation. However, a shift in the tan δ peak position by DMA from 64 to 57°C suggests a partial solubility of PCL in the PLA‐rich phase. Scanning electron microscopy reveals phase separation and a transition in the phase morphology from spherical to interconnected domains as the equimolar blend approaches from the outermost compositions. The spherulitic growth of both PLA and PCL in the blends was followed by polarized optical microscopy at 140 and 37°C. From tensile tests at speed of 50 mm/min Young's modulus values between 5.2 and 0.4 GPa, strength values between 56 and 12 MPa, and strain at break values between 1 and 400% were obtained varying the blend composition. The viscoelastic properties (E′ and tan δ) obtained at frequency of 1 Hz by DMA are discussed and are found consistent with composition, phase separation, and crystallization behavior of the blends. POLYM. ENG. SCI., 46:1299–1308, 2006. © 2006 Society of Plastics Engineers     

Intercalation of methylene blue in n-alkanethiolated self-assembled monolayers: Versatile electrochemical platforms for characterizing surfactant adsorption on hydrophobic surfaces

A versatile electrochemical platform for characterizing the adsorption of neutral and positively charged surfactants on hydrophobic surfaces was established using methylene blue (MB) as the probe. As a rigid, planar and electroactive species, MB can intercalate inside the regular self-assembled monolayers (SAMs) of n-hexanethiol and exhibit well-defined electrochemical responses. The adsorption of surfactants on the hydrophobic SAMs through the intercalation interaction between the hydrophobic tails of surfactants and the SAMs might change the density of the SAMs and influence the electrochemical behaviors of MB, providing a simple but effective approach for characterizing surfactant adsorption on hydrophobic surfaces. As an example, the adsorptive behaviors of cetyltrimethylammonium bromide (CTAB), a positively charged surfactant, and Triton X-100, a neutral surfactant, on hydrophobic surfaces were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that these surfactants generally experienced three different adsorptive behaviors: the monomer adsorption at low concentrations, the loose monolayer adsorption at intermediate concentrations and the dense monolayer adsorption at high concentrations. In the case of CTAB, a new additional submonolayer adsorptive behavior between the monomer and the loose monolayer adsorption was observed for the first time, due to its rather long hydrophobic tail.     

Preparation and properties of nadic‐end‐capped cyclotriphosphazene‐containing polyimide/carbon fiber composites

New novel fire‐resistant and heat‐resistant cyclotriphosphazene‐containing polyimide resins were prepared in situ by the polymerization of (p‐aminophenoxy)(phenoxy)cyclotriphosphazenes with 3,3′,4,4′‐benzophenonetetracarboxylic acid or 3,3′,4,4′‐diphenylsulfonetetracarboxylic acid and a crosslink agent, 5‐norbornene‐2,3‐dicarboxylic acid and were used as polymer matrix compositing with a woven carbon fiber to prepare nadic‐end‐capped cyclotriphosphazene‐containing polyimide/carbon fiber composites. The thermal stability, flame retardance, morphology of the surface fracture, and some physical properties of the composites were investigated by thermogravimetric analysis, scanning electron microscopy, and a material testing system, respectively. The composites had good thermal stability, flame retardance, and mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 810–818, 2003     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Preparation and ionic conductivity of solid polymer electrolyte based on polyacrylonitrile‐polyethylene oxide

The transparent and flexible solid polymer electrolytes (SPEs) were fabricated from polyacrylonitrile‐polyethylene oxide (PAN‐PEO) copolymer which was synthesized by methacrylate‐headed PEO macromonomer and acrylonitrile. The formation of copolymer is confirmed by Fourier‐transform infrared spectroscopy (FTIR) measurements. The ionic conductivity was measured by alternating current (AC) impedance spectroscopy. Ionic conductivity of PAN‐PEO‐LiClO₄ complexes was investigated with various salt concentration, temperatures and molecular weight of PEO (Mn). And the maximum ionic conductivity at room temperature was measured to be 3.54 × 10^?4 S/cm with an [Li⁺]/[EO] mole ratio of about 0.1. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 461–464, 2006