76 mm口径EFP成形过程数值模拟及影响因素研究

采用LS-DYNA3D对76mm口径药型罩爆炸成型弹丸(EFP)的成形过程进行了数值模拟，模拟结果与实验数据基本吻合．通过数值模拟着重分析了装药长径比L／D、壳体厚度、药型罩壁厚对EFP速度的影响规律，得到了有关EFP成形速度公式，得出EFP速度随L／D的增大而增大，随药型罩厚度增大而减小，受装药外壳厚度影响不大．     

Mitigation of polarization-mode dispersion in multichannel lightwave transmission systems

We propose a novel polarization-mode dispersion (PMD) compensation scheme for wavelength-division-multiplexing (WDM) systems, in which many WDM channels share one or a few PMD compensators at receiver site. It is shown, both analytically and numerically, that this scheme can achieve virtually the same performance as that using per-channel-based PMD compensation.     

Courtesy piggybacking: supporting differentiated services in multihop mobile ad hoc networks

Due to the salient characteristics such as the time-varying and error-prone wireless links, the dynamic and limited bandwidth, the time-varying traffic pattern and user locations, and the energy constraints, it is a challenging task to efficiently support heterogeneous traffic with different quality of service (CoS) requirements in multihop mobile ad hoc networks. In the last few years, many channel-dependent mechanisms are proposed to address this issue based on the cross-layer design philosophy. However, a lot of problems remain before more efficient solutions are found. One of the problems is how to alleviate the conflict between throughput and fairness for different prioritized traffic, especially how to avoid the bandwidth starvation problem for low-priority traffic when the high-priority traffic load is very high. In this paper, we propose a novel scheme named Courtesy Piggybacking to address this problem. With the recognition of interlayer coupling, our Courtesy Piggybacking scheme exploits the channel dynamics and stochastic traffic features to alleviate the conflict. The basic idea is to let the high-priority traffic help the low-priority traffic by sharing unused residual bandwidth with courtesy. Another noteworthy feature of the proposed scheme is its implementation simplicity: The scheme is easy to implement and is applicable in networks using either reservation-based or contention-based MAC protocols.     

北京火车站抗震鉴定与加固技术

北京火车站是首都重要的标志性建筑之一 ,195 9年建成 ,当时按 7度设防考虑 ,存在着许多不符合抗震要求的问题 ,一些设施也明显不能满足现代使用功能要求。北京火车站抗震加固与改造设计项目组 ,运用多种先进的加固手段 ,在保持原建筑外貌不变的前提下 ,实现了抗震能力和改善使用功能的协调 ,取得了大型公共建筑加固改造的新经验     

一种新型的光纤位移传感器

测量平动物体位移的光纤传感器已有许多报导,而测量转动物体位移的光纤传感器却很少,从原理和实验两方面对后一问题作了研究。     

δ掺杂样品中空穴态的新行为

用有效质量理论研究了δ掺杂势中电子和空穴的行为。发现能量接近于δ势垒峰的空穴穿越势垒时能产生一系列谐振态。这些状态中的空穴波函数汇聚在势垒峰周围而同量子限制在势阱中的电子波函数交叠,产生光跃迁。用MBE生长的δ掺杂样品进行光调制光谱测量,发现明显的带间跃迁峰。测得的光谱峰同理论计算的能级相吻合,证实了δ势垒中空穴的新行为。     

In-situ TEM Observation of Dislocation Emission, Multiplication and Motion Induced by Anodic Dissolution in Type 310 Stainless Steel

A special constant deflection device for TEM has been designed and then the dislocation configuration change ahead of a loaded crack tip after corrosion or anodic dissolution for some time but before the initiation of SCC can be observed in TEM. The results showed that anodic dissolution during SCC of a type 310 stainless steel in deionized water could promote dislocation emission,multiplication and motion before the initiation of SCC.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

可燃性粉尘环境用电气设备标准介绍

章着重对可燃性粉尘环境用电气设备新标准（GB12476．1－2000和GB12476．2－2XXX）的主要内容进行了介绍，并对粉尘的爆炸机理，国内外粉尘标准体系等进行了阐述。     

掺杂聚苯胺的表面接枝共聚改性

化学氧化法制备的聚苯胺表面的亲水性差，本文在本征态和不同酸掺杂志聚苯胺的表面上接枝共聚丙烯丙烯酸和丙烯酰胺，明显地改善了聚苯胺的表面亲水性。结果显示，聚苯胺表面经过等离子体处理后，有利于丙烯酸和丙烯酰胺在聚苯胺表面上的接枝共聚，随着接枝量增多，导电率则随之有所下降，此外，利用ＳＥＭ和反射ＩＲ表征了改性反聚苯胺表面的形态和结构。