影响带锯机锯切质量的原因及处理措施

通过对锯切装置的改进，提高了锯切性能，降低了锯条成本，保证了锯切质量，使设备更加高效、安全的工作。     

一种中温C/C复合材料抗氧化涂层的制备及其性能

制备了一种工作温度约1 173 K的C/C复合材料抗氧化复合涂层,它由磷酸盐过渡层和陶瓷相阻挡层构成,通过与单一陶瓷相涂层的对比试验研究了它的抗氧化机理。涂覆有该复合涂层的C/C复合材料试样,在空气中1 173 K时氧化10 h的失重率为11.25％,氧化失重率为9.84×10~(-5)g/(cm~2·min),而且其氧化失重率随氧化时间延长而降低;4 h内经过30次从1 173 K至室温急冷急热循环后,失重率为6.38％,涂层基本完好,说明涂层在温度不超过1 173 K时具有良好的抗氧化性和抗热震性。该种涂层适合于中温下C/C复合材料的抗氧化保护。     

耐材功能计价的创立与应用

阐述了功能计价创立的背景及其概念、原理，并介绍了安钢耐火材料功能计价的实际应用情况。     

真空蒸发沉积VOPc薄膜及磁场对薄膜结构与性能的影响

用真空蒸发制备了酞菁氧钒 (VOPc)薄膜 ,并在磁场中进行了热处理。用X光电子能谱、X射线衍射、紫外 可见吸收光谱、原子力显微镜等手段对制备的薄膜进行了表征。结果表明沉积的酞菁氧钒薄膜为α 型 ,成分接近酞菁氧钒的分子式。制备的薄膜在磁场中进行了热处理 ,发现磁场使酞菁氧钒薄膜性质发生改变 :UV VIS吸收谱Q带发生红移 ;XRD谱图衍射峰强度明显增强 ,峰位略有变化 ;原子力显微镜 (AFM)分析发现晶粒大小无明显变化。以上结果说明磁场的存在使得VOPc分子在热处理过程中发生了定向的排列     

固体火箭发动机喷管用C/C复合材料的研究进展

C/C复合材料已成为固体火箭发动机(SRM)最理想的喷管材料。综述了国内外SRM喷管用C/C复合材料的研究进展、应用状况以及烧蚀性能的研究状况,展望了今后C/C复合材料喷管的发展趋势。     

A Parallel Deadlock Detection Algorithm with O(1) Overall Run-time Complexity

This article proposes a novel parallel, hardware-oriented deadlock detection algorithm for multiprocessor system-on-chips. The proposed algorithm takes full advantage of hardware parallelism in computation and maintains information needed by deadlock detection through classifying all resource allocation events and performing class specific operations, which together make the overall run-time complexity of the new method O(1). We implement the proposed algorithm in Verilog HDL and demonstrate in the simulation that each algorithm invocation takes at most four clock cycles in hardware.     

A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

重庆温泉寺及其寺庙园林史略

本文以重庆温泉寺庙园林为例,说明现在重庆园林布局仍以寺庙建筑为中心,组成严整的东西对称格局,其建造充分体现了“天人合一”的思想境界和“道”的自然无为的原则。     

丰满流域可能最大暴雨与可能最大洪水分析研究

依据丰满漉域的水文气象资料,计算丰满流域可能最大暴雨,推求白丰区间的可能最大洪水并进行成果合理性分析.