CSP热连轧机振动性质的确定

针对某钢厂CSP热连轧机出现的振动问题,综合运用现场实测和计算机仿真的方法对轧机振动的性质进行了系统的分析,并得到了如下初步结论:工作辊水平方向的振动是由主传动系统的扭转振动引起的强迫振动。     

履带车辆电传动系统电气机械联合制动优化控制与仿真

根据电传动研究情况,提出了电传动电气机械联合制动优化控制目标;在这个目标下,完成了电气制动控制策略优化,进行了原车机械制动系统在联合制动中制动力的分配,通过试验和仿真说明它的合理性;最后给出联合制动的仿真结果,并进行了分析。     

Influence of interfacial strength on the fracture toughness of glass-ceramic matrix composites

Nine kinds of glass-ceramic matrix composites with different compositions and interfacial strength (τ _s) were prepared. The influence of τ _s on the fracture toughness(K _1c) of composites was studied. It was discoved that, for the system no chemical reaction taking place at the interface, K _1c increased proportionally with τ _s increasing at the first stage, then decreased when τ _s reached a certain value. According to this result, a model of relationship between τ _s, thermal mismatch (Δα _r) and K _1c was built up. If a chemical reaction took place and a new phase was formed in the interface, the K _1c of composite was effected by the combination of τ _s, chemical bonding, radial interfacial stress and other factors. Project supported by the National Natural Science Foundation of China Synopsis of the first author Wang Lingsen, professor, born in 1938, current research field: special ceramic and ceramic matrix composite, etc.     

提高VD脱氢效率的研究

分析了影响VD脱氢效率的众多因素,采取相应的措施后,基本上满足了对氢含量有要求的钢种的生产.     

Curvilinear lattice in chiral carbon nanotubes

In this paper, the energy bands of chiral-type single-walled carbon nanotubes are studied employing a new curvilinear lattice theory and its reciprocal lattice aided by the spherical triangle theory. In this theory, the notion of a distance law is introduced as a constraint to determine the electronic characteristics of carbon nanotubes. The chiral tubes are proven to be semiconducting or metallic, depending on the diameters and helical angles of the tubes. The distance law also predicts an uncertainty for the electronic characteristics of chiral tubes due to the metallic states tightly surrounding the semiconducting states on the direct lattice, and vice versa. Results predicted by the distance law agree well with theoretical calculations of the electron density of states and published measurements.     

Q型聚类分析在确定成矿脉岩中的应用——以桦甸大庙子-菜抢子金矿区为例

吉林桦甸大庙子-菜抢子金矿区脉岩十分发育,且与成矿关系密切。通过近两年对该矿区实际地质调查研究,并重新采集各矿床脉岩、矿石样品30件,以Au、Ag、Cu等8种成矿元素作为变量,用Q型聚类分析的相关系数法进行了统计计算,计算得出金-黄铁矿型矿体与辉绿岩、煌斑岩、花岗斑岩有关;金-多金属型矿体主要与二长花岗斑岩、闪长玢岩有关,并与实际地质调查认识一致。由此明确了本矿区随着岩浆由中性向酸性演化,成矿由贵金属向多金属矿化转变。并在空间上形成叠加．     

建立技术能手激励机制促进员工素质提高

韶钢机械制造厂通过实施操作岗位技术能手激励机制,有效地提高了员工技能素质,稳定了员工队伍,使企业竞争力得到了进一步提高.     

吉林延边金谷山金矿床地球化学特征

以金谷山金矿床的成矿地质特征为基础, 研究了区域地球化学场及异常特征、岩(矿)石微量元素地球化学特征.矿床位于金及其它成矿元素的高背景场中,与成矿有关的元素组合为Au-Sb-As,异常强度高,分带性明显;地层、岩浆岩、构造等地质单元的地球化学特征表明,成岩作用、构造作用与成矿作用关系密切.     

浅谈锅炉中的低温腐蚀和烟气脱硫

为提高火力发电厂锅炉的热效率,延长锅炉的使用寿命,保护环境,提出了低氧燃烧和烟气脱硫两种方案。     

基于MCS算法的飞机起落架仿真研究

提出了一种新的自适应控制律(MCS算法)来描述飞机起落架系统,分析了MCS算法(Minimal Control Synthesis Algorithm)的优点,建立了自适应控制起落架的数学模型和线性状态控制方程.基于起落架系统的稳定性和鲁棒性,采用MCS的控制方法对起落架系统进行设计,得到了起落架的控制模型.最后通过Matlab仿真软件对采用MCS算法控制的起落架模型进行了仿真分析,仿真结果表明:MCS算法能够使起落架的控制变量快速达到理想的参考模型输出并且控制曲线平滑,同时控制系统具有很好的鲁棒性能,增强了系统的抗干扰能力.