Nanoindentation mapping of mechanical properties of cement paste and natural rocks

This paper reports a study to assess nanoindentation mapping of mechanical properties of cement paste and natural rocks. Initial work seems to show that mechanical property mapping by nanoindentation is feasible and can be related to microscopic information. Further work is however required on the effect of indent size and spacing. Such a testing technique can be very useful for materials with different phases to study the intrinsic properties of each component, and also the interaction and properties of the interfacial regions of different phases. The values of Young's modulus and hardness of the individual mineral phases were also determined by statistically analysing a large number of experimental data.     

浅埋地下建筑风冷热泵空调系统传热模型与试验研究

本文在浅埋地下建筑风冷热泵空调系统围护结构传热动态模拟的基础上，通过对南京市太园地下旅社围护结构传热的实时测试，验证动态传热模型及计算机模拟方法的可行性和正确性，为浅埋地下建筑风冷热泵空调系统的装机容量、节能指标和设计计算提供一定的理论依据。     

Transient performance study of a brushless doubly fed twin stator induction generator

This paper presents theoretical, simulation, and experimental study of the brushless doubly fed twin stator induction generator (BDFTSIG) dynamics under vector control based on the orientation on the power machine stator flux. A complex transfer function is derived which links the control current and power winding current space vectors in the field coordinates. Based on this result, the transient response of the BDFTSIG to step changes in the control current is examined theoretically. The oscillatory transients are explained in detail and linked to control flux transients triggered whenever operation point of the generator is changed. Furthermore, BDFTSIG operation with closed loop control of the power machine active and reactive powers is examined theoretically and experimentally. It is shown that in the closed loop operation, the system damping may be reduced so that the PI controller gains must be properly selected to achieve a good transient response.     

国际工程索赔技巧的应用

在国际工程合作过程中,如何运用索赔技巧是相当复杂和有待探索解决的问题。承包商索赔的成功在很大程度上取决于索赔技巧的掌握和运用。对索赔技巧方面的基本情况进行介绍,对承包商应在合同签订、合同管理、索赔过程处理和人际关系等方面如何运用好索赔技巧进行探讨。     

醋酸钾催化合成肉桂酸

对用醋酸钾作催化剂，以苯甲醛和醋酸酐为原料，通过Perkin反应制备肉桂酸进行了研究，经正交试验得出反应的最佳工艺条件：苯甲醛／醋酸酐摩尔比1：3，催化剂用量6g，反应时间2h，反应产率48．59％。     

动力配煤高温复合固硫剂研究

分析了高温复合固硫剂各成分的作用，实验研究了在不同配比的燃烧试验下，各成分对燃煤着火和燃烧以及对炉渣固硫的影响，得出了该煤种高温复合固硫剂的最佳配方。     

Time-dependent deformation in an enhanced SiC/SiC composite

Time-dependent deformation in an enhanced SiC/SiC composite has been studied under constant load at high temperatures of 1200 °C, 1300 °C, and 1400 °C. Creep damage evolution was evaluated by a Young’s-modulus change of partial unloading and microscopic observation. The addition of the glassy phase in the matrix is very effective for protecting the composite from oxidation. The transient creep is dominant in creep life at all the temperatures. An empirical equation is proposed to describe creep behavior of the composite. It is found that creep activation energy increases with creep time at stresses lower than matrix cracking stress, but the activation energy remains constant at stresses higher than the matrix cracking stress. The creep strain rate of the composite is considered to be controlled by creep of fibers based on examining the time, strain, stress, and temperature dependencies of creep strain rates.     

香豆胶衍生物的化学结构及稳定性研究

将市售商品溶于水,用异丙醇沉析提纯,溶于0.1 mol/L NaNO3纯水溶液中,经0.5μm滤膜过滤后用水相凝胶渗透色谱法(GPC)测定,测得香豆胶(FG)、羟丙基香豆胶(HPFG)、阳离子香豆胶(CFG)的数均、重均相对分子质量Mn、Mw分别为:1.19×105、3.36×105,8.52×104、2.85×105,9.33×104、2.87×105。用甘露聚糖链在碱性条件下醚化时发生降解,解释两种改性FG的相对分子质量较FG低而多分散性(Mw/Mn)较FG高的测试结果。认为商品FG的1%水溶液黏度(1300 mPa.s)高于商品HPFG和CFG(分别为705和610 mPa.s)的原因是前者相对分子质量较高且残渣含量也较高(~10%,后二者为1%~2%)。HPFG的取代度为0.12,根据文献发表的13C-NMR数据确认HPFG分子链上羟丙基取代位置为C6。讨论了香豆胶(半乳甘露聚糖)的化学结构。热重分析法测定的热稳定性,HPFG高于CFG,CFG又高于FG。图6表3参13。     

斜拉桥动力特性的参数分析

建立了斜拉桥动力分析的三维有限单元模型 ,研究了单元类型和参数变化对斜拉桥动力特性的影响。详细地讨论了斜拉桥非线性来源 ,并运用 6节点薄壁单元和 4节点索单元分别考虑了斜拉桥弯曲构件和索的非线性特性。通过对一斜拉桥的数值分析 ,得到了关于斜拉桥动力参数敏感性的一般结论。     

An alternative method to compute the component fractions in the geometrical optical model: visual computing method

A method called visual computing was used to solve angular four-components' proportions and directional vegetation cover fraction for discrete canopies and continuous row-planted plants. It proved effective to predict the angular characteristics on pixel scale. The method could be an alternative way to a classical solution of geometrical optical models. A visual computing method would be effective especially when the canopies' spatial distribution and shapes were irregular and could not be described statistically.