信息系统测试监理要点分析研究

系统测试是项目验收的重要工作,也是保证软件项目质量的重要手段,系统测试工作的规范化、标准化、科学化,更有利于提高测试结果的准确性,从而提高项目的质量;依托东营软件园甲骨文公共技术服务平台项目,介绍了信息系统的类型及信息系统项目测试的流程,探讨了系统测试的关注点,分析了基于IBM云平台基础架构对Oracle软件产品进行二次开发配置的系统测试的流程及监理工作要点,实现了对系统测试的监理工作内容及要点的分析,指出了系统测试监理对软件工程监理的重要性。     

身管弯曲度测量误差处理技术研究

给出了基于PSD(position sensing detector)传感器的弯曲度测量系统的基本硬件结构。分析了电路系统引起的系统误差和随机误差。提出了采用内插、曲线拟合、动态调零等技术消除电路部分系统误差及采用滤波抑制随机误差的处理方法。分析了机械系统由于机械加工、机械装配引起的系统误差．建立了误差模型。提出了通过最小二乘法求解误差参数和修正测量结果的误差处理方法。     

Analysis of injection-locked antenna array including mutual coupling effects

In this paper, the injection locking performance analysis of dipole antenna array with each element loaded with a two-terminal oscillator is presented. The analysis is based on the nonlinear model of oscillator and the linear model of antenna array considering mutual coupling effects. The locking range of injection signal and the array radiated power are obtained by solving an equivalent multiport network. In general, the solutions include stable and unstable solutions. The Routh-Hurwitz stability criterion is then applied to remove the unstable solutions. Numerical results show that the array performance such as frequency locking range and radiated power by taking into account the array mutual coupling effects is quite different from that of an isolated antenna element. In addition, the influence of antenna element spacing upon array locking parameters in this paper is found to be consistent with other existing theories.     

A low-noise L-band EDFA with a 1500-nm Raman-pumped dispersion-compensating fiber section

This report presents a low-noise L-band erbium-doped fiber amplifier (EDFA) with a dispersion-compensating Raman amplifier. With an optimized prestage and 1500-nm Raman-pump laser diodes, the proposed EDFA achieved an internal noise figure of less than 4.5 dB over a 33-nm flat gain bandwidth within 0.5 dB at -2 dBm of large signal input power.     

移动宽带互联网热点业务及商业模式浅析

综述移动宽带互联网正在发生的变化,对LBS、应用商店及UGC所影响的业务和热点商业模式进行了介绍和分析。     

软件无线电及其实现技术

软件无线电是一种新兴技术，通过软件使多种业务、多种标准、多个频段与灵活的无线电系统的组合成为可重新配置和可重新编程的。介绍了软件无线电的概念及系统结构，并进一步讨论了现阶段软件无线电所面临的技术问题以及相应的实现方案。     

基于遗传优化的阈值选取方法

图像分割的关键性技术是阈值选取。在图像阈值选取中,最小误差法受目标大小和噪声影响小,对小目标仍具有好的分割效果,但运算量较大。本文利用遗传算法优化最小误差法获得最佳阈值。算法简单、快速、稳定性强,而且减少直接引用最小误差法的运算量,提高其性能。实验结果表明可减少50％左右的运算量。     

基于应用的实时网络管理

本文针对指挥信息系统实时网络管理需求，通过对现有网管系统组成、网络管理技术和功能的分析，提出指挥信息系统基于应用的实时网络管理设想。     

Cognitive amplify‐and‐forward relay networks with beamforming under primary user power constraint over Nakagami‐m fading channels

In this paper, we analyze the performance of cognitive amplify‐and‐forward (AF) relay networks with beamforming under the peak interference power constraint of the primary user (PU). We focus on the scenario that beamforming is applied at the multi‐antenna secondary transmitter and receiver. Also, the secondary relay network operates in channel state information‐assisted AF mode, and the signals undergo independent Nakagami‐m fading. In particular, closed‐form expressions for the outage probability and symbol error rate (SER) of the considered network over Nakagami‐m fading are presented. More importantly, asymptotic closed‐form expressions for the outage probability and SER are derived. These tractable closed‐form expressions for the network performance readily enable us to evaluate and examine the impact of network parameters on the system performance. Specifically, the impact of the number of antennas, the fading severity parameters, the channel mean powers, and the peak interference power is addressed. The asymptotic analysis manifests that the peak interference power constraint imposed on the secondary relay network has no effect on the diversity gain. However, the coding gain is affected by the fading parameters of the links from the primary receiver to the secondary relay network. Copyright © 2012 John Wiley & Sons, Ltd.     

3D Localization for Launch Vehicle Using Virtual TOA and AOA of Ground Stations

Wireless Personal Communications - Generally, a ground telemetry station for a launch vehicle (LV) includes a tracking function only; therefore, position measurements for LV depend on received...