SOC设计中的浮动压焊块电源/地线网络设计和优化

随着VLSI工艺技术的发展和芯片规模的不断增加，尤其是在SOC设计中，原有的那种供电压焊块只能位于芯片边缘的确定益的模式已经不能够满足整个电路性能的需要。在很多情况下，依靠在电源线的拓扑结构确定后的线宽优化，还是无法保证在有限的布线资源下为电路提供可靠的高性能的供电需求。由此，出现了在芯片边缘上浮动放置压焊块及在芯片的顶部放置供电压焊块阵列的方法。文中提出了一种用于SOC设计中新的基于树型结构的浮动压焊块的电源／地线网络优化算法，经过MCNC电路实例测试后得到明显的优化结果。     

Estimation for the number of components in a mixture model using stepwise split-and-merge EM algorithm

The main difficulty with EM algorithm for mixture model concerns the number of components, say g. This is the question of model selection, and the EM algorithm itself could not estimate g. On the contrary, the algorithm requires g to be specified before the remaining parameters can be estimated. To solve this problem, a new algorithm, which is called stepwise split-and-merge EM (SSMEM) algorithm, is proposed. The SSMEM algorithm alternately splits and merges components, estimating g and other parameters of components simultaneously. Also, two novel criteria are introduced to efficiently select the components for split or merge. Experimental results on simulated and real data demonstrate the effectivity of the proposed algorithm.     

Sol-Gel Preparation of LaNiO3 and Its Physical and Chemical Properties

LaNiO3 was synthesized by sol-gel method in which lanthanum nitrate and nickel nitrate were used as start materials and citric acid was used as complex for gel formation.The precursor was dried and subsequently heated at elevated temperature to form the desired product.XRD analysis shows that pure LaNiO3 was synthesized.Electrical conductivity and electrochemical performance of the material were tested.The electrical conductivity decreases from 34.5that there are current peaks in the curve, which is the evidence of the electrochemical activity of LaNiO3.     

Photoluminescence and X-ray Diffraction of Distributed Bragg Reflector

Spectral and structural characteristics of distributed Bragg reflector (DBR) in vertical-cavity surface-emitting lasers were studied with photoluminescence and double- crystal X- ray diffraction measurement. The expected high quality epitaxial DBR structure was verified. In the X- ray double- crystal rocking curves of DBR the zeroth- order peak, the first and second order satellite peaks were measured. Splitting of diffraction peak appeared in the rocking curves was analyzed. The effects of introduced deep energy levels on the structural perfection and optical properties were discussed.     

Distributed Optical Fiber Sensor for Multi-point Temperature Measurement

The distributed optical fiber sensing technology is overviewed, which is based on Raman scattering light theory. Basic operation principle, structure, system characteristics and signal processing are discussed. This structure and method of the signal processing possess of certain spatial resolution, hence will ensure the practicability of system.     

一种低功耗Cache设计技术的研究

低功耗、高性能的cache系统设计是嵌入式DSP芯片设计的关键。本文在多媒体处理DSP芯片MD32的设计实践中，提出一种利用读／写缓冲器作为零级cache，减少对数据、指令cache的读／写次数，由于缓冲器读取功耗远远小于片上cache，从而减小cache相关功耗的方法。通过多种多媒体处理测试程序的验证，该技术可减少对指令cache或者数据cache20％～40％的读取次数，以较小芯片面积的增加换取了较大的功耗降低。     

一种改善Turbo乘积编码OFDM系统性能的新方法

本文提出一种利用对译码器软信息限幅来改善多径衰落信道中Turbo乘积编码OFDM(TPC-OFDM)系统性能的新方法。通过对不同多径衰落信道中QPSK映射和16QAM映射的TPC-OFDM系统性能的数值仿真，结果表明在10^-5误比特率下，这种新方法比传统的迭代译码大约有6～10dB的改进，对严重多径环境下TPC-OFDM系统的错误平底也有明显的改进。     

接收机整机最小噪声系数的实现

前级LNA的性能指标的好坏对接收机整体性能起主要作用。较流行的设计方法是用ADS等仿真软件在Smith圆图上作出LNA的等增益圆和等噪声圆，以确定LNA是否同时满足所要求的增益和噪声系数指标。这种方法虽然满足了设计要求，但往往不能获得整机噪声的最佳点。本文在符合设计指标后进一步对噪声和增益的关系进行分析，建立适用于常用接收机的简单模型，在此基础上获得基于整机噪声的最佳点。这种设计方法可以广泛应用于各种微波接收系统中,降低整机哭声系数.     

MSP-G320240DBCW-211N大规模点阵式LCD与PIC单片机接口技术

介绍了大规模点阵式液晶显示器MSP-G320240DBCW-211N的特点及其与PIC18F6620单片机的接口技术，提出了应用过程中可能遇到的问题和解决方法．给出相关的C程序设计并在研制的智能光电检测仪器上得以成功地应用。     

生产系统的计算机仿真研究

生产系统在设计与运行过程中面临着诸多的问题需要解决，计算机仿真技术作为一种有效验证生产系统设计合理性和辅助生产管理决策的手段，近年来在我国得到了越来越广泛的关注。该文系统总结了计算机仿真技术对生产系统的重要作用，利用Ithink5.0软件建立了简单生产过程的计算机仿真模型并进行了分析。