Study of the Mössbauer effect on rare-earth borided surface layers on pure iron

Journal of Materials Science Letters -     

A new method for calculating loss coefficients [of power systems]

A method is proposed which avoids many limitations associated with traditional B-coefficient loss coefficient calculation. The proposed method, unlike the traditional B-coefficient method, is very fast and can handle line outages. The method utilizes network sensitivity factors which are established from DC load flow solutions, Line outage distribution factors (ODFs) are formulated using changes in network power generations to simulate the outaged line from the network. The method avoids the use of complicated reference frame transformations based upon Kron's tenser analysis. The necessity of data normalization used in least squares and the evaluation of the slope of &thetas;_j versus PG_n is not necessary with the proposed method. Using IEEE standard 14-bus and 30-bus systems, the method's results are compared against results obtained from an AC load flow program (LFED). The method's solution speed is compared to that of the LFED method, the base case database method and the conventional B-coefficient method based on A_jn-factor. The proposed method is easy to implement and, when compared to other methods, has exhibited good accuracy and rapid execution times. The method is well suited to online dispatch applications     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

金刚石光电导探测器研制及在软X光测量中的初步应用

介绍了我们自己设计制造的天然Ⅱａ型金刚石光导探测器的结构，原理，制造工艺，实验标定及其在ＩＣＦ实验中软Ｘ光测量中的应用等。     

Handling degenerate cases in exact geodesic computation on triangle meshes

The computation of exact geodesics on triangle meshes is a widely used operation in computer-aided design and computer graphics. Practical algorithms for computing such exact geodesics have been recently proposed by Surazhsky et al. [5]. By applying these geometric algorithms to real-world data, degenerate cases frequently appear. In this paper we classify and enumerate all the degenerate cases in a systematic way. Based on the classification, we present solutions to handle all the degenerate cases consistently and correctly. The common users may find the present techniques useful when they implement a robust code of computing exact geodesic paths on meshes.     

中小城镇住宅消防设施现状及建设管理探索

通过对西部某小城市的住宅消防设施建设和管理现状的调查 ,反映了占西部绝大部分城市面积的中小城镇的住宅消防设施十分令人担忧的现状 ,分析了造成这一现状的原因 ,提出了解决这一问题的建设管理思路     

锝化学研究 Ⅸ.脑显像剂Tc~(Ⅴ)ON_2S_2类配合物结构稳定性和价态的研究

采用改进的ＣＮＤＯ／２法模拟了ＢＡＴ类脑显像剂Ｔｃ（Ⅴ）Ｏ配合物价态的转换过程，发现Ｎ２Ｓ２类配体与Ｔｃ（Ⅴ）Ｏ核配位时，可能存在配位平衡离子Ｘ。在溶液中由于Ｘ离子的优先解络，瞬间存在＋１价对称性９９Ｔｃｍ配合物，并且，它又自动向相对稳定的０价不对称性９９Ｔｃｍ配合物转换，在动态转换过程中，将导致仅有一个配位Ｎ原子保留一个质子，这与实验结果一致。采用键级削弱百分数概念，表征配位过程的二个配位Ｎ原子上保留程度，解释了Ｔｃ（Ⅴ）Ｏ核、Ｔｃ（Ⅴ）≡Ｎ核Ｎ２Ｓ２类配合物两个Ｎ－Ｈ键上质子保留程度不同的原因，为今后设计不同价态锝配合物结构提供理论依据。     

复合超细丙纶及应用

对国内外细旦丙纶的开发和发展进行了介绍，阐述了单丝纤度为０．１～０．５ｄｔｅｘ的复合超细丙纶的制造方法、原材料规格、复合剥离技术以及产品质量。重点讨论了复合超细丙纶及织物的舒适性、染色性和卫生性，应用于织造、服装领域。     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ