Structural and gas-sensing properties of nanometre tin oxide prepared by PECVD

A low-temperature plasma-enhanced chemical vapour deposition (PECVD) technique has been employed to produce ultrafine tin oxide powders. The structural features and phase transition of this material have been characterized using differential thermal analysis (DTA), thermogravimetric analysis (TGA), X-ray diffraction, infrared spectroscopy (IR) and transmission electron microscopy (TEM). The oxygen absorption behaviour and gassensing properties have been investigated by electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS) and electrical measurements. Thick film gas sensors made from such ultrafine SnO₂ powders yield better sensitivities than those of normal undoped SnO₂ gas sensors. A gas-sensing reaction mechanism is also proposed.     

网格生成方法在APFSDS及弹托干扰流场计算中的应用

介绍APFSDS及弹托干扰流场数值模拟中的网格生成方法及其应用。利用等比数列网格生成技术，三维弧长生成技术以及拼接技术生成计算网格。该方法具有简明、快捷的特点。在临近物面的地方具有较好的贴体性和正交性。在计算脱壳穿甲弹和弹托之间的干扰时，将弹托简化为带圆弧的楔形块，计算结果比较令人满意。     

Variants of chromosome 9 in phenotypically normal individuals

The human chromosome 9 displays the highest degree of structural variability. Four different types of variants are described including pericentric inversion, extra G-positive band in the q arm, additional G-positive band in the p arm and duplication of band 9q21-q22. It is important to demonstrate inheritance from a phenotypically normal individual in order to differentiate between a variant chromosome and an abnormal chromosome.     

Recent developments in the understanding of antinuclear autoantibodies

Cytological identification of soybean mitotic metaphase chromosomes (2n = 40) has been severely limited by their small size and uniform karyomorphology. We have developed fluorescent in situ hybridization (FISH), PCR-primed in situ labelling (PCR-PRINS) procedures, and molecular probes for routine cytological identification and for the physical mapping of soybean somatic chromosomes. Chromosome preparation has been achieved by modifications of previous protocols and through the preparation of root-tip protoplasts prior to chromosome spreading. Initially our probe selection focused on highly repeated DNAs that provide very intense localized hybridization signals. Repetitive gene probes that have proven valuable include the rDNA loci (5S and 45S) which are chromosome specific. We have also developed satellite DNA probes for two different sequence families: the SB92 and the STR120 satellites. Both of these are tandemly arranged at multiple chromosomal loci. By using different cloned examples of each family, we have been able to selectively label unique subsets of soybean chromosomes. Double hybridization with biotin and digoxigenin labeled probes has allowed us to determine the chromosomal overlap between different probes. In addition, we have joined portions of the metaphase chromosome painting patterns with the genetic map by single-copy FISH and PCR-PRINS detection of the RFLP loci G8.15, G17.3, and A199a and A199b. Total genomic DNA in situ hybridization (GISH) patterns were also used to characterize the soybean chromosomes.     

Compressive and tribological properties of Al2O3 fibre and hexagonal BN particle hybrid reinforced Al-Si alloys

Al₂O₃ fibre-hexagonal BN particle hybrid reinforced aluminium-silicon alloys were fabricated by centrifugal force infiltration route. Hardness test and ultimate compressive test results are reported. The wear and friction properties of hybrid MMCs was investigated by means of a block-on-ring (bearing steel) type wear rig in a dry sliding condition. It is shown that the hardness and ultimate compressive strength of hybrid MMCs was evidently decreased with the addition of hexagonal BN particles, however, the wear rate and coefficient of friction of hybrid MMCs was improved simultaneously with increase of BN particle volume fraction, especially for the higher applied loads in the test.     

The Transformation of Carbides during Austenization and Its Effect on the Wear Resistance of High Speed Steel Rolls

The transformation of carbides with austenization time of a high speed steel (HSS) roll material, manufactured by a centrifugal casting method, has been studied. The correlation between wear resistance and the type, morphology, volume fraction, and distribution of the carbides has also been investigated. Microstructural observations, X-ray diffraction (XRD) analysis, hardness measurements, and energy dispersive spectroscopy (EDS) have been used to characterize the carbides. The type and volume fraction of carbides were found to change with austenizing time. During austenization, the transformation of the M₃C carbides can be postulated as M₃C + γ-Fe → M₂C, with much finer nodular and rodlike MC carbides also forming through a solid-state transformation. The M₂C carbide decomposes as M₂C + γ-Fe → MC + M₇C₃ + M₆C. The decomposed carbide substantially maintains a platelike shape until the end of decomposition. The most important finding of this study is that austenization results in changes in the type, morphology, volume fraction, and distribution of carbides and that it can be controlled to produced a homogeneous distribution of hard carbides, resulting in an improvement in the wear resistance of HSS rolls. This finding may be of great use for the industrial production of HSS rolls.     

Efficient encoding of IEEE 802.11n LDPC codes

Addressed is the issue of LDPC coding for the emerging IEEE 802.11n standard. An efficient encoding algorithm is proposed. The algorithm is simple and easy to implement. The memory requirement is trivial     

利用假单胞菌天冬氨酸－β－脱羧酶高效生产L－丙氨酸

通过诱变筛选得到一株具有高活性Ｌ－Ａｓｐ－β－脱羧酶的菌株ＰｓｅｕｄｏｍｏｎａｓＮＸ－１，对该株酶形成和酶反应的条件进行了详细研究，该株可以高效地转化Ｌ－Ａｓｐ生成Ｌ－ＡＩａ，转化４～５山每Ｌ培养液可转化Ｌ－Ａｓｐ量高达１４００ｇ左右，生成Ｌ－Ａｌａ浓度高达９０％以上，摩尔转化率近１００％。     

关于保障鞍山市城市饮水安全的研究及对策

本文在全面阐述鞍山市水资源现状的基础上,系统地分析了鞍山市供水系统存在的问题,并针对鞍山实际情况,提出了保障鞍山市城市饮水安全的相关研究及对策。