用加权余量法计算球形催化剂的有效因子

本文利用加权余量法计算了等温球形催化剂的有效因子,并对催化反应n=1,2的两种情况与其它简化法进行了比较.文中取Dirac函数作为权函数,形式简单,在袖珍计算器上就能完成计算.其结果:当n=1时,与解析解非常接近;当n=2时,优于其它三种简化解法,很接近数值解.     

Cooperative effect of crystallization temperature and NaF addition in the formation process and hydrothermal stability of MCM-48 mesoporous molecular sieve

The hydrothermal stability of MCM-48 was conveniently and effectively improved by increasing the crystallization temperature and directly adding NaF to the synthesis gel. The crystallization temperature varied from 373 K to 403 K. The influences of NaF addition, crystallization temperature and crystallization time on the formation process and hydrothermal stability of MCM-48 were systematically studied here to solve the problem of poor reproducibility. Results from XRD patterns indicated that the crystallization temperature and crystallization time were very critical factors for the improvement of the hydrothermal stability besides NaF addition. The formation process of MCM-48 was significantly accelerated and the pore structure ordering was also greatly improved by increasing the crystallization temperature and F⁻/Si ratio. A high hydrothermally stable MCM-48 mesoporous molecular sieve was obtained after being crystallized at 393 K for 36 h in the presence of NaF, which endured the hydrothermal treatment in boiling water at least for 4 days. However, only an amorphous product was obtained when the crystallization temperature was further increased to 403 K. Results from Si MAS NMR, N₂ adsorption isotherms, TEM, Raman spectra and XRD patterns manifested that the improved stability of MCM-48 was attributed to the high silicates condensation degree and the excellent pore structure ordering. The possible reason for the successful formation of hydrothermally stable MCM-48 sample by controlling the crystallization temperature, time and F⁻/Si ratio was explained here.     

Irganox(R) HP-136的抗氧化机理及对聚丙烯加工稳定性的影响

介绍了Irganox(R) HP-136在PP加工中的作用,表明它能有效地捕获烷基自由基,与传统的受阻酚类及亚磷酸酯类抗氧剂复配与传统的二元抗氧稳定体系相比,具有添加量少、抗氧性能优等优点.比较了Irganox(R) HP-136(3-芳基-苯并呋喃酮)与传统抗氧剂的抗氧机理,并分析了在聚合物稳定体系中的作用.     

Cu2O-CuAlO2-Cu基金属陶瓷导电性能研究

通过热压技术制备Cu2O-10CuAlO2-xCu金属陶瓷材料，并对其导电性能进行了研究。结果表明，Cu2O-10CuAlO2-xCu在Cu含量超过15wt．％后呈金属导电性。材料的微观结构观察及物理性能测试表明，金属陶瓷材料的电导率不仅取决于材料的金属相含量，还取决于金属相颗粒尺寸和孔隙率的大小。材料中金属相的颗粒尺寸取决于热压工艺参数，随着热压温度的升高而增大，但随热压压力的升高而减小。     

在VPO催化剂上丁烷选择氧化的质谱研究

The selective oxidation of n-butane to maleic anhydride(MA) on a vanadium-phosphorus oxide (VPO) catalyst was studied using on-line gas-chromatography combined with mass spectrometry(GC-MS) and transient response technique.The reaction intermediates,butene and furan,were found in the reaction effuent under near industrial feed condition (3% butane 15% O2),while dihydrofuran was detected at high butane concentration (12% butane,5%O2).Some intermediates of MA decomposition were also identified.Detection of these intermediates shows that the vanadium phosphorus oxides are able to dehydrogenate butane to butene,and butene further to form MA.Based on these observations,a modified scheme of reaction network is proposed.The transient experiments show that butane in the gas phase may directly react with oxygen both on the surface and from the metal oxide lattice,without a proceeding adsorption step.Gas phase oxygen can be adsorbed and transformed to surface lattice oxygen but it can not participate in selective oxidation.Adsorbed oxygen leads to deep oxidation,while lattice oxygen leads to selective oxidation.     

一水合硫酸氢钠催化β-萘甲醚的合成

利用一水合硫酸氢钠催化合成 β 萘甲醚 ,3 6 gβ 萘酚 ,3ml甲醇 ,1 5g一水合硫酸氢钠 ,80℃反应5h ,HPLC分析产率达 78 3%。固体催化剂容易过滤分离。     

湿式氨法脱硫工艺及应用

随着二氧化硫对环境的污染越来越严重,国家环保总局对烟气二氧化硫排放控制严格,烟气脱硫显得日益重要。简单介绍了湿式氨法烟气脱硫技术的工艺流程及实际应用情况。湿式氨法脱硫工艺具有原料易得、脱硫塔不易结垢、不产生废水、副产品硫酸铵可作为农用肥料,减少了对环境的二次污染等特点,是较适合我国国情的烟气脱硫技术。     

Generalized Transfer Subspace Learning Through Low-Rank Constraint

It is expensive to obtain labeled real-world visual data for use in training of supervised algorithms. Therefore, it is valuable to leverage existing databases of labeled data. However, the data in the source databases is often obtained under conditions that differ from those in the new task. Transfer learning provides techniques for transferring learned knowledge from a source domain to a target domain by finding a mapping between them. In this paper, we discuss a method for projecting both source and target data to a generalized subspace where each target sample can be represented by some combination of source samples. By employing a low-rank constraint during this transfer, the structure of source and target domains are preserved. This approach has three benefits. First, good alignment between the domains is ensured through the use of only relevant data in some subspace of the source domain in reconstructing the data in the target domain. Second, the discriminative power of the source domain is naturally passed on to the target domain. Third, noisy information will be filtered out during knowledge transfer. Extensive experiments on synthetic data, and important computer vision problems such as face recognition application and visual domain adaptation for object recognition demonstrate the superiority of the proposed approach over the existing, well-established methods.     

D301树脂分离衣康酸的工艺研究

采用弱碱性阴离子交换树脂Ｄ３０１对发酵法生产的衣康酸进行了分离研究。通过静态交换实验，研究了Ｄ３０１树脂对衣康酸的静态交换动力学，确定了传质机制和影响因素；通过动态交换实验，研究了以硫酸为洗脱剂，以氨水为再生剂的工艺过程，确定了主要工艺参数。