高维分形理论在断口表面分形维数计算上的应用

本文应用高维分形理论计算了颗粒复合材料ＡＢＳ／ＣａＣＯ３拉伸断口的表面分形维数，为断口表面分形维数的计算提供了一种简便的方法。     

基于OSD控制器MB90092的一种视频安全通信系统设计

引入了在屏显示控制芯片MB90092的视频字符叠加技术,用以提高相关部门视频监控通信系统的安全性能,该方法能有效抵制非法人员对监控摄像头及其线路的非法作假行为,确保远程监控视频图像的真实性和可靠性.     

Structure and Electric Properties of （1-x）（Bi1/2Na1/2） TiO3-xBaTiO3 Systems

The structural, dielectric and piezoelectric properties of （1-x）（Bi1/2Na1/2） TiO3-xBaTiO3 ceramics were investigated for the compositional range, x=0.02, 0.04, 0.06, 0.08, 0.10. The samples were synthesized by a conventional solid-state reaction technique. All compositions show a single perovskite structure, and X-ray powder diffraction patterns can be indexed using a rhombohedral structure. Lattice constants and lattice distortion increase while the amount of BaTiO3 increases. The X-ray diffraction results show the morphotropic phase boundary （MPB） of （1-x）（Bi1/2Na12） TiO3-xBaTiO3 exists in near x=0.06-0.08. Temperature dependence of dielectric constant eT33/ε0 measurement reveals that all compositions experience one structural phase and two ferroelectric phases transition below 400℃： rhombohedral （or rhombohedral plus tetragonal） ferroelectric phase ←→ tetragonal antiferroelectric phase ←→ tetragonal paraelectric phase. Relaxor behaviors exist in the course of ferroelectric to antiferroelectric phase transition. Dielectric and piezoelectric properties are enhanced in the MPB range for （ 1-x）（Bi1/2Na1/2）TiO3-xBaTiO3.     

局域网内ARP病毒欺骗攻击与防范措施

目前局域网内ARP病毒的频繁发作情况,对ARP病毒的欺骗原理进行分析、并提出了防范措施。     

准直LED光斑定位系统设计

针对准直激光在长期工作过程中很难克服的漂移问题,设计了一套准直发光二极管（LED）光斑定位系统。该系统将LED光源发出的光经透镜汇聚进光纤,再经过准直器准直输出,用CCD探测光斑图像,采用多圆拟合法定位光斑位置。将系统与定制的半导体激光器（LD）准直定位系统进行了长期稳定性对比实验。结果表明,所设计的准直的LED光斑定位系统光斑位置漂移量更小,稳定性更高,可以作为高精密光学测量的定位基准光源。     

基于单片机的同步发电机自动并列装置设计

同步发电机与电网大系统进行并列是一项非常复杂关键的任务,阐述了同步发电机并列的条件及传统手动并列验证装置及方法。为了使同步发电机在实验室条件下,准确、快速地与电网大系统并列,介绍了一种以AT89C51单片机为核心的同步发电机自动并列装置。分析了该系统的硬件组成及软件设计,该并列装置并网时具有快速、准确等优点。     

核为｜x—s｜^-1n｜x—s｜的强奇异积分的数值计算法

讨论了核为｜x-s｜^-1n｜x-s｜的一种强奇异积分fa^b ln｜x-s｜/｜x-s｜f（x）dx,给出了它的Hadamard有限部分积分的定义,并利用Lagrange线性插值构造了函数f（x）这类强奇异积分的数值算法,最后分析和讨论了算法的误差估计。     

基于Zigbee网络的路由算法研究

本文针对基于Zigbee网络的路由算法进行相关研究,并分析其优缺点。     

钢铁生产中管坯加热的单机连续型批调度策略研究

连续型批处理机调度问题是从钢铁生产线提炼出来的一种新型的批调度模型,该调度模型中,批的加工时间取决于该批的大小、批中工件的最大加工时间及机器的容量。研究目标函数为最小加权总完工时间的单机连续型批调度问题,分析最优解的性质,讨论最优的批内、批间序及分批策略,给出工件权值与加工时间逆序情况下的动态规划算法。     

Superplasticity and superplastic bulging behavior of ZrO<Subscript>2</Subscript>/Ni nanocomposite

ZrO2/Ni nanocomposite was produced by pulse electrodeposition and its superplastic properties were investigated by the tensile and bulging tests. The as-deposited nickel matrix has a narrow grain size distribution with a mean grain size of 45 nm. A maximum elongation of 605% was observed at 723 K and a strain rate of 1.67×10-3s-1 by tensile test. Superplastic bulging tests were subsequently performed using dies with diameters of 1 mm and 5 mm respectively based on the optimal superplastic forming temperature. The effects of forming temperature and gas pressure on bulging process were experimentally investigated. The results indicated that ZrO2/Ni nanocomposite samples can be readily bulged at 723 K with H/d value (defined as dome apex height over the die diameter) larger than 0.5, indicating that the nanocomposite has good bulging ability. SEM and TEM were used to examine the microstructure of the as-deposited and bulged samples. The observations showed that significant grain coarsening occurs during superplastic bulging, and the microstructure is found to depend on the forming temperature.