New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

内陆核电厂放射性废液中硼酸的反渗透分离实验研究

建设内陆核电是我国经济社会发展的必然需求,但由于内陆核电自然环境和社会环境的特殊性,必须更进一步考虑排放对环境和公众的安全影响,对放射性废液进行深化处理,在解控排放的基础上进一步降低排放水平。本文在内陆AP1000机组已实施的放射性废液处理系统改进的基础上,开展了放射性废液深化处理研究,通过大量实验考察了不同进水pH值、硼浓度、含盐量、水温等水质条件和不同工作压力、回收率等运行条件下反渗透装置对硼酸的去除性能和对模拟放射性核素的截留能力。结果表明,通过控制适当的工艺条件,可以去除废液中80%以上的硼酸,同时保持很好的核素去除效果,达到进一步降低排放水平的目的。研究成果可为内陆核电厂放射性废液处理系统深化处理工程应用提供有力的技术支撑,并为后续内陆核电放射性废液深化处理提供参考。     

航空胶片显影液调整的计算机处理方法

为解决航空胶片显影液调整问题，采用了Visual Basic6.0开发了“显影液化学分析调整软件，该系统具有一定的应用价值。     

Change of short-term memory effect in acute ischemic ventricular myocardium: A computational study

The ionic mechanism of change in short-term memory (STM) during acute myocardial ischemia has not been well understood. In this paper, an advanced guinea pig ventricular model developed by Luo and Rudy was used to investigate STM property of ischemic ventricular myocardium. STM response was calculated by testing the time to reach steady-state action potential duration (APD) after an abrupt shortening of basic cycling length (BCL) in the pacing protocol. Electrical restitution curves (RCs), which can simultaneously visualize multiple aspects of APD restitution and STM, were obtained from dynamic and local S1S2 restitution portrait (RP), which consist of a longer interval stimulus (S1) and a shorter interval stimulus (S2). The angle between dynamic RC and local S1S2 RC reflects the amount of STM. Our results indicated that compared with control (normal) condition, time constant of STM response in the ischemic condition decreased significantly. Meanwhile the angle which reflects STM amount is less in ischemic model than that in control model. By tracking the effect of ischemia on intracellular ion concentration and membrane currents, we declared that changes in membrane currents caused by ischemia exert subtle influences on STM; it is only the decline of intracellular calcium concentration that give rise to the most decrement of STM.     

Capturing the Regime-Switching and Memory Properties of Interest Rates

We propose a mean-reverting interest rate model whose mean-reverting level, speed of mean-reversion and volatility are all modulated by a weak Markov chain (WMC). This model features a simple way to capture the regime-switching evolution of the parameters as well as the memory property of the data. Concentrating on the second-order WMC framework, we derive the filters of the WMC and other auxiliary processes through a change of reference probability measure. Optimal estimates of model parameters are provided by employing the EM algorithm. The \(h\) -step ahead forecasts under our proposed set-up are examined and compared with those under the usual Markovian regime-switching framework. We obtain better goodness-of-fit performance based on our numerical results generated from the implementation of WMC-based filters to a 10-year dataset of weekly short-term-maturity Canadian yield rates. Some statistical inference issues of the proposed modelling approach are also discussed.     

鹽酸氟桂利嗪有关物质测定方法的研究

在Balestrion·F.,Jirillo·R. 等人的研究及卫生部部颁标准在基础上,对盐酸氟桂利嗪的有关物质的测定方法进行了研究,由薄层色谱法改为高效液相色谱法,操作简单易行,分辨率高,重现性好,结果准确可靠。     

Hydrothermal study in the system Na2O-CaO-SiO2-H2O at 300°C

Using silicic acid, fused quartz, CaO, NaOH, α-CS, NS, NC₂S₃, N₂CS₃ (2) as starting materials, reaction products are pectolite, β-NS₂, xonotlite, foshagite, NC₂S₂H, CH, C₆S₂H₃, quartz and NS. Pectolite is the predominent phase; its formation requires a minimum amount of water as solvent. Pectolite and NC₂S₂H are the only two quaternary products in the system. The reactivity of the starting materials, conditions of formation and the importance of the aqueous phase, including the way it is added, are discussed.     

聚乙烯生产技术及其催化剂的研究进展

阐述了当今世界聚乙烯（PE）催化剂，即铬系、钛系、茂金属和非茂金属单活性中心催化剂技术的发展，推动了PE生产过程和产品的技术进步，PE生产工艺和催化剂技术的进步使PE的性能进一步改进，更易于加工成型。新的生产技术主要包括：双峰PE生产技术、反应器新配置技术、冷凝态和超冷凝态技术等。通过对国内PE生产技术进步、催化剂的研发和装置国产化现状分析，指出与国外相比还存在较大差距，对今后我国PE工业的发展提出了建议。     

Communicating Is Crowdsourcing: Wi-Fi Indoor Localization with CSI-Based Speed Estimation

Numerous indoor localization techniques have been proposed recently to meet the intensive demand for location-based service (LBS). Among them, the most popular solutions are the Wi-Fi fingerprint-based approaches. The core challenge is to lower the cost of fingerprint site-survey. One of the trends is to collect the piecewise data from clients and establish the radio map in crowdsourcing manner. However the low participation rate blocks the practical use. In this work, we propose a passive crowdsourcing channel state information (CSI) based indoor localization scheme, C²IL. Despite a crowdsourcing based approach, our scheme is totally transparent to the client and the only requirement is to connect to our 802.11n access points (APs). C²IL is built upon an innovative method to accurately estimate the moving speed solely based on 802.11n CSI. Knowing the walking speed of a client and its surrounding APs, a graph matching algorithm is employed to extract the received signal strength (RSS) fingerprints and establish the fingerprint map. For localization phase, we design a trajectory clustering based localization algorithm to provide precise real-time indoor localization and tracking. We develop and deploy a practical working system of C²IL in a large office environment. Extensive evaluations indicate that the error of speed estimation is within 3%, and the localization error is within 2 m at 80% time in a very complex indoor environment.     

基于损益云模型的制造车间重调度决策方法

针对制造车间重调度触发机制问题,建立了制造车间重调度损益函数,揭示了生产车间重调度过程损失及增益的变化规律.引入云理论测度重调度损益的不确定性,使用逆向云算法计算重调度增益云和损失云的数字特征,根据云形态预测重调度损益变化趋势.提出一种基于损益云模型的重调度决策方法以判断是否需要重调度,并利用最佳损益比甄选预调度方案以兼顾生产系统的稳定性和有效性.最后,通过实例验证了该方法的合理性和实用性.