STM32的便携式手机蓝牙考勤机系统设计

在研究各种考勤系统的基础上,提出了一种手机蓝牙实现考勤的方法。该系统采用STM32F103RBT6微处理器作为核心,利用蓝牙模块搜索手机蓝牙设备与本地数据库进行匹配,通过语音播报和液晶显示两种方式给出考勤结果。该设计可以改变传统的被动式考勤方式,且成本低、操作简便。     

Online class size, note reading, note writing and collaborative discourse

Researchers have long recognized class size as affecting students?? performance in face-to-face contexts. However, few studies have examined the effects of class size on exact reading and writing loads in online graduate-level courses. This mixed-methods study examined relationships among class size, note reading, note writing, and collaborative discourse by analyzing tracking logs from 25 graduate-level online courses (25 instructors and 341 students) and interviews with 10 instructors and 12 graduate students. The quantitative and qualitative data analyses were designed to complement each other. The findings from this study point to class size as a major factor affecting note reading and writing loads in online graduate-level courses. Class size was found positively correlated with total number of notes students and instructors read and wrote, but negatively correlated with the percentage of notes students read, their note size and note grade level score. In larger classes, participants were more likely to experience information overload and students were more selective in reading notes. The data also suggest that the overload effects of large classes can be minimized by dividing students into small groups for discussion purposes. Interviewees felt that the use of small groups in large classes benefited their collaborative discussions. Findings suggested 13 to 15 as an optimal class size. The paper concludes with a list of pedagogical recommendations and suggestions for new multimedia software features to enhance collaborative learning in online classes.     

Input‐to‐state stability of min‐max MPC scheme for nonlinear time‐varying delay systems

This paper studies the robustness problem of the min–max model predictive control (MPC) scheme for constrained nonlinear time‐varying delay systems subject to bounded disturbances. The notion of the input‐to‐state stability (ISS) of nonlinear time‐delay systems is introduced. Then by using the Lyapunov–Krasovskii method, a delay‐dependent sufficient condition is derived to guarantee input‐to‐state practical stability (ISpS) of the closed‐loop system by way of nonlinear matrix inequalities (NLMI). In order to lessen the online computational demand, the non‐convex min‐max optimization problem is then converted to a minimization problem with linear matrix inequality (LMI) constraints and a suboptimal MPC algorithm is provided. Finally, an example of a truck‐trailer is used to illustrate the effectiveness of the proposed results. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

"牺牲"阳极法合成乙醇钽研究

研究了“牺牲“阳极法电化学合成乙醇钽过程中,添加剂种类与浓度、电解液温度、阴阳极极距和电流密度的影响.选取最佳合成条件为:四甲基氯化铵0.04 mol/L,温度为电解液的沸腾温度,极距约2 cm,电流密度220 A/m2.电合成的混合液经常压蒸馏和减压蒸馏,得到产品用红外光谱、拉曼光谱和元素分析进行表征,确定了产品为乙醇钽.电合成的电流效率大于95%,产品蒸馏时钽的直收率82.8%.     

EFFECT OF RARE EARTH ADDITIONS ON THE IMPACT FRACTURE OF Cr18Nil8Si2 STEEL

<正> Cr 18 Ni 18 Si 2钢经热处理后的低温冲击断口,其中加稀土的为穿晶断口,而未加稀土的为混合型断口。 试验用钢用高频感应炉冶炼,锭重20kg,锻成15×15mm方棒,再加工成冲击试样。其化学成分如下。稀土的加入是将一号混合稀土合金缚在钢棒上插入熔池。     

含钴锆基块状非晶合金的制备与力学性能

采用水淬法制备了Zr—Ti—Cu—Ni—Be—Co块状非晶合金(BMGs)。使用XRD进行相分析，采用热分析仪进行玻璃转变温度、晶化温度和热稳定性等的测定，用SEM观察试样压缩后的外表面和断口形貌。研究了Co对Zr—Ti—Cu—Ni—Be合金非晶形成能力(GFA)、热稳定性及力学性能的影响。结果表明：含Co的所有Zr—Ti—Cu—Ni—Be BMGs都有1个明显的玻璃转变点和宽的过冷液相区(△T）。Zr38Ti17Cu10.5Co12Be22.5合金具有和Zr41Ti14Cu12.5Ni10Be22.5合金相当的△T；Co的添加明显提高Zr—Ti—Cu—Ni—Be BMGs的力学性能，含Co量大于10at％的Zr—Ti—Cu—Ni—Be BMGs的压缩断裂强度（σf）超过2000MPa，Zr38Ti17Co22.5Be22.5合金的σf达到2230MPa，比Zr41Ti14Cu12.5Ni10Be22.5合金的σf提高23％。     

基于混合聚类算法的高压配电网网架规划

以高压配电网为研究对象,建立了含建设运营、故障停电损失及资产回收等成本的全寿命周期成本规划模型,提出一种基于混合聚类算法的高压配电网规划方法.首先,根据规划区域的负荷分布情况,利用DBSCAN算法与K-means算法相结合的混合聚类算法对供电分区及变电站进行划分;然后,结合区域容载比的要求,确定各供电区待建变电站总容量;最后,利用Floyd-Warshall算法求解满足目标函数要求的变电站站址和接线形式,得到整个供电区域内的高压配电网规划方案.通过某实际规划区作为算例,验证了模型和方法的实用性和有效性.     

Ionization of Porous Hypercrosslinked Polymers for Catalyzing Room-Temperature CO2 Reduction via Formamides Synthesis

Catalysis Letters - Porous materials with heterogeneous nature occupy a pivotal position in the chemical industry. This work described a facile pre- and post-synthetic approach to modify porous...     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...