PAMAM接枝稻草对Nd3+、Sm3+、La3+的吸附特性

以环氧氯丙烷为交联剂,将聚酰胺胺树状大分子(PAMAM)接枝到稻草基体上,利用FTIR、SEM、XRD、TG等对其结构进行了表征和分析。考察了其对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附性能,探讨了吸附时间、稀土金属离子浓度、吸附温度、溶液pH等因素对吸附性能的影响。同时对吸附过程的动力学、吸附等温线和吸附热力学进行了研究。结果表明,所制备的吸附剂对Nd~(3+)、Sm~(3+)、La~(3+)稀土金属离子的吸附平衡时间约为4 h,平衡吸附量分别为47.14、40.11和50.12 mg/g。吸附过程符合拟二级动力学模型和Freundlich等温线,表明此吸附过程是属于化学吸附过程。吸附热力学研究表明,此吸附过程是自发进行的,同时吸附过程是一个混乱度增加的熵增过程。     

利用氯碱厂废弃盐泥制备NO3-吸附剂

将氯碱厂废弃盐泥与丙烯酸、钛酸四正丁酯等共聚，过硫酸钾作引发剂，制得TNO3^-吸附剂，同时还得到了有利用价值的二氧化硅和碳酸钙。用正交试验法与单纯形优化法相结合，确定了废弃盐泥制备NO3^-吸附剂的优良配方及合适的工艺。增添了水净化剂的新品种，探索了氯碱工业废弃盐泥利用的新途径。     

Study of nucleation activity and application of a nucleating agent to copolypropylene

The influences of nucleating agent content on crystallization peak temperature, crystallization curve shape, crystallization onset temperature, and crystallinity of a copolypropylene were studied in detail by differential scanning calorimetry. The results showed that crystallization onset temperature and crystallization peak temperature increased 17°C–22°C and 15°C–19°C, respectively, with increasing nucleating agent content. The behavior of the nucleating agent showed excellent efficiency. But the shape of the crystallization curve broadened with increasing nucleating agent content, and the crystallinity came to an extremum when the nucleating agent content was 0.2%. These results generally differed from those for crystallization of i‐PP by a nucleating agent. Modification of copolypropylene was studied by use of a nucleating agent, and the characteristics of the effects of the nucleating agent on copolypropylene were mastered. The results showed that the hardness of a copolypropylene improved observably. So the abrasion resistance of biaxially oriented polypropylene (BOPP) film for cigarette packaging was improved by adopting the modified copolypropylene as the skin‐layer heat‐seal material of BOPP film. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101:3915–3919, 2006     

耐温抗冲防腐蚀涂料的研制

以环氧丙烯酸酯与呋喃胺/环氧树脂的互穿聚合物网络(IPN)为基料,制备了耐温、抗冲击性能优良的防腐蚀涂料。讨论了环氧丙烯酸酯的用量对涂料各种性能的影响。试验表明,环氧丙烯酸酯的用量为30%,采用E-51环氧树脂与呋喃胺树脂配合时,漆膜的综合性能较优。     

Theoretical studies of displacement deposition of nickel into porous silicon with ultrahigh aspect ratio

A model is developed to address the uniformity of displacement deposition of nickel inside porous silicon with an ultrahigh aspect ratio as high as 200. The nickel distribution is treated as a current distribution issue as in electrodeposition. It is shown that the deposition distribution along the pore depth exhibits a strong dependence on a polarization parameter ξ. High values of ξ correspond to mass transport limitations and lead to non-uniform distributions, whereas small ξ values, representing interfacial reaction control, produce uniform distributions. Non-uniform deposition primarily occurs at an initial stage in which the reaction is dominated by mass transfer. As the deposition process continues, the deposition rate drops to a low value, and the deposition uniformity shifts from Ni²⁺ mass transport limitations to its interfacial reaction control, leading to uniform Ni²⁺ concentration and deposition rate distributions. It is predicted that the non-uniformity at the initial stage could be remedied by increasing the bulk concentration of the nickel ions and decreasing the plating bath pH. In addition, the uniformity of the deposition distribution can be significantly improved by introducing inhibiting additive coumarin to the plating solution.     

密闭条件下使用的氟硅密封剂的制备

讨论了硫化体系，硫化剂用量，填料种类对在密闭条件下使用的氟硅密封剂耐热性能的影响，结果表明，采用硅氮烷低聚物作硫化剂，TiO2为补强填料，硅氟密封，剂在密闭环境中180℃高温下降解不明显，硫化后的密封剂仍保持一定的硬度和良好的弹性。     

阻燃增塑剂溴化及溴氯化石蜡的合成工艺

综述了阻燃增塑剂溴化及溴氯化石蜡的各种合成工艺路线，讨论了相应的合成反应机理．包括反应历程和有关化学热力学计算，简要介绍了安徽省化工研究院已工业化的溴化及溴氯化石蜡合成工艺的特点。     

管式振荡流反应器的流动模式研究 (II)高振荡强度下的流动模型和模拟

根据高振荡强度下的粒子成像流场可视化实验结果,在分析振荡流场中漩涡结构特征的基础上,提出用带有二次流区的全混腔室和室间返混的多釜串联模型来表征高振荡强度下的管式振荡流反应器流动特性。根据停留时间分布实验结果,运用小生境遗传算法优化求解模型参数与振荡参数之间的定量关系。模拟计算表明,优化后的模型给出的停留时间分布曲线与实验结果吻合良好。     

地热供热系统腐蚀问题初探

地热是地球本身蕴藏的能源，储量极为丰富，我国在很多领域都大力开发和应用地热。但由于地热水本身的特点，地热系统在运行当中会出现严重的腐蚀现象，本文对地热系统腐蚀的形成及控制进行了初探。     

准同型相界附近(Na1-xKx)0.5Bi0.5TiO3的制备及性能研究

利用固相法制备了（Na1-xKx）0.5Bi0.5TiO3系压电陶瓷，XRD分析表明所得陶瓷样品为纯的钙钛矿结构，其准同型相界在x=0．18～0．22之间；电子探针显微分析显示所做陶瓷样品晶粒发育良好，具有规则的外形和明显的晶界；实验所得陶瓷样品损耗tanδ最大不超过5％，最好的压电常数d33=153 pC／N，平面机电耦合系数kp=0．299，它们分别出现在x=0．22和0．20处。